Yacht Stanchions Stainless.
Yacht stanchions 316 stainless steel. stanchions with cone or ball top, various length available. usually out for next day delivery 2:00pm work day cut-off, 465mm yacht stanchion cone top., 465mm yacht stanchion cone top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 455mm from base, ø 10mm. lower hole 200mm from base, ø 10mm. n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£30.72 inc VAT |
![](http://dorama.fun/777/templates/cheerup/res/banner1.jpg)
625mm Yacht Stanchion Cone Top.
625mm yacht stanchion cone top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 615mm from base, ø 10mm. lower hole 313mm from base, ø 10mm. n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£36.43 inc VAT |
715mm Yacht Stanchion Cone Top.
715mm yacht stanchion cone top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 705mm from base, ø 10mm. lower hole 350mm from base, ø 10mm. n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£46.02 inc VAT |
450mm Yacht Stanchion Ball Top.
450mm yacht stanchion ball top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 452mm from base, ø 10mm lower hole 195mm from base, ø 10mm n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£31.63 inc VAT |
625mm Yacht Stanchion Ball Top.
625mm yacht stanchion ball top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 608mm from base, ø 10mm. lower hole 312mm from base, ø 10mm. n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£29.95 inc VAT |
720mm Yacht Stanchion Ball Top.
720mm yacht stanchion ball top. 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 710mm from base, ø 10mm lower hole 360mm from base, ø 10mm n.b. the bottom has 2 of 6mm holes 90 degrees apposed at 35mm centres up, for use with 4113323 & 4113123 other bases can be used as the holes will be covered up.
£50.95 inc VAT |
625mm Yacht Stanchion Cone Top. See NB
625mm yacht stanchion cone top. see nb 25mm diameter tapered polished aisi 316 stainless. the central hole has a stainless tube to prevent chafing. top hole 615mm from base, ø 10mm . lower hole 300mm from base, ø 10mm. nb: to be used with stanchion bases 4117325 or 4117326.
£46.59 inc VAT |
Where to find us
Sea Screw Ltd. 4 Churchdale Road Eastbourne East Sussex England BN22 8PS
- Help & History
- Delivery Costs
- Conversion Chart
- Abbreviations Used
- Product Enquiries
- Sale Enquiries
- Terms, Conditions & Refund Policy
©2024 Sea Screw LTD.
![title= stainless steel yacht stanchions](https://whitewatermarineinc.com/images/slider/cache/8c859939b1decd83f3ad221933608238/brushed-stainlessdesktopbg.jpg)
Stock Stanchions
FYI: We also sell select stanchions and parts manufacturer-direct at the WWM store. Pay instantly via secure checkout. Buy complete stanchions, stanchion bases and stanchion tubes.
Stanchions - standard-tube
Stanchions - tapered-tube
Tubes - standard
Tubes - tapered
Replacement Stanchions
And, if you need just one or two lifeline stanchions to replace broken ones, we do that too. It's a lot less time, money and trouble than you think. In fact, we may already have your stanchion blueprints on file. White Water maintains a huge database of OEM specifications for U.S. production boats dating back to the 1960s.
Order replacement stanchions
Base Styles
Shown L-R: 1) toerail; 2) trapezoid; 3) 3”x4” rect. base 3/16” thick; 4) custom trapezoid; 5) 1/8”rectangle. All bases available in welded-on or removeable socket style.
Shown L-R: 1) conical; 2) tube; 3) ring; 4) flat; 5} round; 6) 3/4 top for tapered; 7) 5/8 top for tapered
Thru Hole Styles
Shown L-R: 1) plastic grommet; 2) welded; 3) pressed ferrule.
Is It 'In-Stock'?
Remember, we maintain a huge database of blueprints and specs for vintage yacht parts. In that sense your part might well be "in-stock." Sparing you the trouble of placing a custom order.
check the dbase
![stainless steel yacht stanchions Goiot Systems](https://goiot-systems.com/wp-content/uploads/2020/05/cropped-Logo-Goiot-Gris-entête.png)
Stainless steel stanchions
![stainless steel yacht stanchions Stainless steel stanchions](https://goiot-systems.com/wp-content/uploads/2020/05/Chandeliers-inox-1.png)
Our stainless steel range features an electrolytical polishing surface treatment. Using this process improves the resistance to marine corrosion and contributes to a long-lasting brilliant stainless steel surface. Depending on the references, the head of the stanchion may be spherical or cylindrical. These stanchions, manufactured with a 316L stainless steel, are available with or without a base drilling. They comply with ISO 15085 standard.
![stainless steel yacht stanchions Embase](https://goiot-systems.com/wp-content/uploads/2020/04/Embase-inox-115633.jpg)
The models with a welded nut also fit on the base 115633
![stainless steel yacht stanchions](https://goiot-systems.com/wp-content/uploads/2022/05/Chandeliers-EN-1200x337.jpg)
"C" refers to in-line drilling and "D" to accross drilling.
![stainless steel yacht stanchions Diagram](https://goiot-systems.com/wp-content/uploads/2017/04/Sans-titre-3.png)
- Advanced Product Search
Request a Quote
Lifeline Stanchion
Grade: 316 stainless steel.
Retail and bulk packaging available
The Lifeline Stanchion is available in a variety of heights, as well as custom heights. This stanchion is made from grade 316 stainless steel for maximum corrosion resistance and durability. It is ideal for sailboat and powerboat railings. The S3608-0025 Bullet Cap is included in the Stanchion Assembly.
The Bullet Cap (S3608-0025) is included in the stanchion assembly.
![stainless steel yacht stanchions Precision Cast](https://suncorstainless.com/wp-content/uploads/2021/01/icon_precision_cast.png)
Specifications
![Stainless Steel Lifeline Stanchion, Railing and Bimini, S3609-2425, S3609-3025, S3609-3625, S3609-CUST, Line Drawing Stainless Steel Lifeline Stanchion, Railing and Bimini, S3609-2425, S3609-3025, S3609-3625, S3609-CUST, Line Drawing](https://suncorstainless.com/wp-content/imported/S3609_Stainless Steel Lifeline Stanchion_Line Drawing.jpg)
ALL DIMENSIONS ARE NOMINAL (+/- 3%) AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ITEM | A (size) | B | C | D | X | Y | Z | WT (lb) |
---|---|---|---|---|---|---|---|---|
S3609-2425 | 24.00″ | 12.00″ | 11.00″ | 0.34″ | 1.00″ | 24.50″ | 1.00″ | 1.32 |
S3609-3025 | 30.00″ | 15.00″ | 14.00″ | 0.34″ | 1.00″ | 30.50″ | 1.00″ | 1.63 |
S3609-3625 | 36.00″ | 18.00″ | 17.00″ | 0.34″ | 1.00″ | 36.50″ | 1.00″ | 2.04 |
Related Products
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2022/02/S3680-1001-Heavy-Top-Cap-300x200.jpg)
Heavy Top Cap
![stainless steel yacht stanchions Product Image for Stainless Steel Removable Pin with Ring](https://suncorstainless.com/wp-content/uploads/2021/02/S3685-0001_Stainless-Steel-Removable-Pin-with-Ring-300x200.jpg)
Removable Pin with Ring
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3681-0_Stainless-Steel-Top-Slide-300x200.jpg)
Heavy Top Slide
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3683-0000_Stainless-Steel-Hinged-Top-Slide-300x200.jpg)
Hinged Top Slide
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3679-0_Stainless-Steel-Flat-End-Cap-300x200.jpg)
Flat End Cap
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-2000_Stainless-Steel-90-Degree-Deck-Hinge-300x200.jpg)
Deck Hinge – 90 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-5000_Stainless-Steel-90-Degree-Deck-Hinge_Removable-Pin-300x200.jpg)
Deck Hinge – 90 Degree, Removable Pin
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-3000_Stainless-Steel-Concave-Deck-Hinge-300x200.jpg)
Deck Hinge – Concave
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-3001_Stainless-Steel-Concave-Deck-Hinge_Removable-Quick-Pin-300x200.jpg)
Deck Hinge – 90 Degree, Removable Pin, Concave
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-0000_Stainless-Steel-Side-Deck-Hinge-300x200.jpg)
Side Deck Hinge
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-1000_Stainless-Steel-Heavy-Duty-Side-Deck-Hinge-300x200.jpg)
Heavy Duty Side Deck Hinge
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-4000_Stainless-Steel-80-Degree-Deck-Hinge_Screwed-300x200.jpg)
Deck Hinge – 80 Degree, Screwed
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3682-4001_Stainless-Steel-80-Degree-Deck-Hinge_Drilled-300x200.jpg)
Deck Hinge – 80 Degree, Drilled
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3685-0000_Stainless-Steel-Lanyard-with-Pin-300x200.jpg)
Lanyard with Pin
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S0224-0_Stainless-Steel-Footmans-Loop-300x200.jpg)
Footman’s Loop
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S0745-0_Stainless-Steel-Lifeline-Adjuster-300x200.jpg)
Lifeline Adjuster
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3666-0_Stainless-Steel-3-Way-Rail-Corner-300x200.jpg)
3-Way Rail Corner
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3684-0001_Stainless-Steel-Multi-Directional-Top-Cap-300x200.jpg)
Multi-Directional Top Cap
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3660-0900_Stainless-Steel-3-Way-T-Rail-300x200.jpg)
Tee Rail, Universal, 90 Degree
![stainless steel yacht stanchions Product Image for Stainless Steel Tee Rail, Universal, 60 Degree](https://suncorstainless.com/wp-content/uploads/2021/02/S3660-0600_Stainless-Steel-Tee-Rail_Universal_60-Degree-300x300.jpg)
Tee Rail, Universal, 60 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3663-0_Stainless-Steel-Bow-Former-300x200.jpg)
Stanchion Brace
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3610-0000_Stainless-Steel-Stanchion-Base_Railing-and-Bimini-300x200.jpg)
Stanchion Base
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3608-0025_Stainless-Steel-Bullet-Cap_Railing-and-Bimini-300x200.jpg)
Forward End Rail, 120 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3671-06_Stainless-Steel-Aft-End-Rail-300x200.jpg)
Aft End Rail, 60 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3672-06_Stainless-Steel-Center-Rail-300x200.jpg)
Center Rail, 60 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3673-0600_Stainless-Steel-Rail-Stanchion-End-300x200.jpg)
Rail Stanchion End
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3673-1600_Stainless-Steel-Rail-Stanchion-Center-300x200.jpg)
Rail Stanchion Center
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3677-0055_Stainless-Steel-End-Mount-In-300x200.jpg)
End Mount In
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3676-0055_Stainless-Steel-End-Mount-Out-300x200.jpg)
End Mount Out
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3652-0900_Stainless-Steel-Rectangular-Base_90-Degree_2-Hole-300x200.jpg)
Rectangular Base – 90 Degree, 2 Hole
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3675-0_Stainless-Steel-Bottom-Mount-300x200.jpg)
Bottom Mount
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3665-0900_Stainless-Steel-Rail-Elbow-300x200.jpg)
![](http://dorama.fun/777/templates/cheerup/res/banner1.jpg)
Round Rail Base – 30 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3650-0450_Stainless-Steel-Round-Rail-Base_45-Degree-300x200.jpg)
Round Rail Base – 45 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3650-0600_Stainless-Steel-Round-Rail-Base_60-Degree-300x200.jpg)
Round Rail Base – 60 Degree
![stainless steel yacht stanchions Product Image for Stainless Steel Round Rail Base, 90 degree](https://suncorstainless.com/wp-content/uploads/2021/02/S3650-0900_Stainless-steel-round-rail-base_90-degree-300x300.jpg)
Round Rail Base – 90 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3651-0300_Stainless-Steel-Rectangular-Base_30-Degree-300x200.jpg)
Rectangular Base – 30 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3651-0450_Stainless-Steel-Rectangular-Base_45-Degree-300x200.jpg)
Rectangular Base – 45 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3651-0600_Stainless-Steel-Rectangular-Base_60-Degree-300x200.jpg)
Rectangular Base – 60 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3651-0900_Stainless-Steel-Rectangular-Base_90-Degree-300x200.jpg)
Rectangular Base – 90 Degree
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3719-1005_Stainless-Steel-Heavy-Duty-Pad-Eye-300x200.jpg)
Heavy Duty Pad Eye
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S3710-0_Stainless-Steel-Pad-Eye-300x200.jpg)
Swivel Web Clip
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2021/02/S0220-0025_Stainless-Steel-Fixed-Bimini-Clip-300x200.jpg)
Fixed Bimini Clip
The product has been added to your list., download our catalog.
![stainless steel yacht stanchions](https://suncorstainless.com/wp-content/uploads/2022/03/catalog-mockup@2x.png)
![stainless steel yacht stanchions stainless steel yacht stanchions](https://www.bosunsupplies.com/skin/bcse_mobility/images/443 new phone.jpg)
Lifeline And Stanchion Page
Everything you'll need for stanchions and lifelines. If you need fittings for your bimini and railing, click here .
- USA Made Anchor Shackle With Screw Pin
- USA Made Round Pin Anchor Shackle
- Anchor Shackle
- Bolt Chain Shackle
- Bow Shackle
- Chain Shackle
- Long D Shackle w/ Captive Pin
- Long D Shackle w/ Screw Pin
- Round Pin Anchor Shackle
- Round Pin Chain Shackle
- Special Bow Shackle w/ No-Snag Pin
- Special D Shackle with No-Snag Pin
- Stainless Bolt Anchor Shackle
- Straight D Shackle
- Straight D Shackle with Captive Pin
- Twist Shackle (Cast)
- Twist Shackle with No-Snag Pin
- Wide D Shackle
- Wide D Shackle With No-Snag Pin
- Halyard Shackle with Key Pin
- Long D Shackle Shackle w/ Key Pin
- Headboard Shackle w/ Captive Pin
- Stamped D Shackle
- Webbing Shackle
- Survival Bracelet Accessories
- Coarse Thread Closed Turnbuckle Bodies
- Fine Thread Closed Turnbuckles Bodies
- Turnbuckle Body (Forged)
- Turnbuckle Body Cast
- Nuts, Wing & Turnbuckle
- Cast Body Jaw And Eye Turnbuckle
- Forged Jaw And Eye Turnbuckle (Open Body)
- Turnbuckle (Closed Body) Jaw & Jaw
- Turnbuckle (Closed Body) Jaw & Swage
- Turnbuckle (Closed Body) Toggle & Swage
- Turnbuckle (Closed Body) Toggle & Toggle
- Turnbuckle (Open Body-Cast) Eye & Eye
- Turnbuckle (Open Body-Cast) Hook & Eye
- Turnbuckle (Open Body-Cast) Hook & Hook
- Turnbuckle (Open Body-Cast) Jaw & Jaw
- Turnbuckle (Open Body-Forged) Eye & Eye
- Turnbuckle (Open Body-Forged) Hook/Eye
- Turnbuckle (Open Body-Forged) Hook/Hook
- Turnbuckle (Open Body-Forged) Jaw & Jaw
- Turnbuckle (Open Body-Forged) Stud & Stud
- Wire Rope 1 x 19 (304)
- Wire Rope 1 x 19 (316)
- Wire Rope 7 x 19 (304)
- Wire Rope 7 x 19 (316)
- Wire Rope 7 x7 (316)
- Wire Rope Lifeline - 7 x 7 PVC (316)
- Anchor Chain (BBB)
- Commercial Chain
- Lifting Chain
- Stainless Safety Chain
- Proof Coil Chain
- High Test Chain
- Long Link Chain
- Twist Link Chain
- Single Jack Chain
- Double Loop Chain
- Cast And Forged Connecting Link
- Square Quick Link
- Long Quick Link
- Delta Quick Link
- Pear Quick Link
- Clevis Grab Hook
- Clevis Slip Hook
- Eye Grab Hook
- Eye Slip Hook
- Swivel Eye Hook
- Threaded Shank Hook
- Master Links
- Hammerlocks
- Blue Water Cleat
- Stainless Folding Cleat
- Stainless Steel E-Z Push-up Cleats
- Studded Cleat
- Herreshoff Cleat
- Trimline Cleat
- Flagpole Cleat
- Flat Top Cleats
- Lifting Eye Cleat
- Mooring Bitt Cleat
- Bow Chocks, (pair)
- Skene Chocks, (pair)
- Straight Chock
- Bimini Fittings, Deck & Rail Hinges
- Bimini Fittings, Top Caps & Slides
- Bimini Top Cap & Swivel Base
- Rail End Caps (Flat)
- Rail Fittings, Rail Ends
- Rail Fittings, 3-Way Corner
- Rail Fittings, 4-Way Tee and Corner
- Rail Fittings, 60 & 90 Degree Tee
- Rail Fittings, 90 T with Eye
- Rail Fittings, Bow Form & Elbow
- Rail Fittings, End & Center
- Rail Fittings, Rectangular Base
- Rail Fittings, Round Base
- Rail Fittings, Take-Apart Slides
- Rail Tubing
- 6 Inch Deck Access Hatch
- Hinges, Door - Equal & Unequal
- Flush Hinges For Both Doors and Tables
- Hinges, H.D. Flush Strap
- Hatch Hinges
- Hinges, Heavy Duty Offset Door
- Hinges, Strap & Butt
- Hinges, T Strap
- Hinges, Take-Apart
- Hose Deck Fills
- Teak Platforms
- White Poly Swim Platforms
- Through Hull Fittings
- Chain & Deck Pipe
- Stainless Steel Rub Rail Ends
- Stainless Steel Rub Strakes
- Stainless Fairlead and Gasket
- Brackets, 90 Degree Angles
- Door Stop & Catch
- Holders, "Holdall" Spring Clamps
- Holders, Boat Hook Holders
- Hooks, Awning & Fender
- Hooks, Cabin/Clothes
- Barrel Bolt
- Brackets, Folding Table
- Hasps, Padlocks and Locking
- Hatch, Flush Deck Latches
- Hatch, Flush Lift Rings
- Winch Handle Holder
- Utility Wall Clip
- Hawse Deck Pipes
- Transom Drain Plugs
- Floor Drain Plate/Vent
- Louvered Vents
- Antenna Mount, Adjustable Rail
- Antenna Mount, Rail/Surface
- Antenna Mount, Ratchet
- Fishing Rod Holder, Flush Mount
- Fishing Rod Holder, Removable
- Fishing Rod Holder, Side Mount
- Four Tube Fishing Rod Holder
- Stainless Steel Rod Holder, Rail Mount
- Flag/Pennant Staff, Bow Rail
- Folding Boat Step
- Lights, Navigation
- Bow/Stern Eye, U-Bolt
- Fender Hook
- Microphone Clip
- Shore Power Cable Holder
- Ski Tow Ring (Transom Mount)
- Pintles & Gudgeons, Dinghy/Keelboat
- Kong Elastic Tethers
- Machine Swage Pelican Hook With Stud
- Swage Domehead
- Swage Marine Eye
- Swage Marine Fork
- Swage Marine Toggle
- Swage Stemball & Cups
- Swage Stud Terminal
- T Terminals & Plates
- Terminal Gate Eye
- Hand Swage Gate Eye (Non-Swivel)
- Hand Swage Joined Gate Eyes (Non-Swivel)
- Hand swage Joined Swivel Gate Eyes
- Hand Swage Lifeline Adjuster
- Hand Swage Pelican Hook
- Hand Swage Short Stud
- Hand Swage Stud
- Hand Swage Swivel Gate Eye
- Hand Swage Toggle
- Hand Swage Toggle Turnbuckle
- Hand Swage Tool
- Mini Hand Swager
- Thimble, Federal Specification 304SS
- Thimble, Federal Specification 316SS
- Thimble, Heavy Duty
- Thimbles, Extra Heavy Duty
- Thimbles, Standard
- Mini Pulley Blocks w/ 1 Sheave
- Schaefer 3 Series Cheek Blocks
- Schaefer 5 Series Cheek Block
- Schaefer 7 Series Cheek Blocks
- Schaefer M-Series Foot - Cheek Block
- Clamp-on Furling Blocks
- Double Blocks
- Double Blocks with Becket
- Exit Blocks
- Fiddle Blocks
- Fiddle Blocks With Becket
- Fiddle Blocks with Cam and Becket
- Lashing Block
- Schaefer 5 Series Single Blocks
- Schaefer 7 Series Single Blocks
- Schaefer M-Series Single Blocks
- Schaefer Series 3 Single Blocks
- Single Blocks with Becket
- Seine (Snatch) Blocks
- Snatch Blocks
- Square Swivel Eye Blocks
- Rope Sheave (Bushing)
- Rope Sheave with Bearings
- Rope Sheave with Bushing
- Wire Rope Sheave with Bearings
- Wire Rope Sheave with Bushing
- Surface Mounted Block with Sheave
- Swivel Blocks w/ 1 Sheave
- Swivel Blocks w/ 2 Sheaves
- Swivel Eye Blocks w/ 1 Sheave
- Swivel Eye Blocks w/ 2 Sheaves
- Wire Rope Clip, 304 Cast
- Wire Rope Clip, 316 Forged
- Wire Rope Clips, Chair Clips
- Bimini/Webbing Clips
- Boom Bails, Heavy Duty - Forged
- Chainplates
- Clevis Pins
- Fixed Snap Shackles
- Aluminum Stop Sleeve
- Aluminum Swage Sleeve
- Cooper Stop sleeve
- Copper Swage Sleeve
- Stainless steel oval sleeve
- Zinc Plated Copper Swage Sleeve
- Suncor Quick Release Pin Style D
- Suncor Quick Release Pin Style M
- Snap Shackles, Cast Jaw Swivel
- Cunningham Hooks
- Downhaul Hooks
- Heavy Duty D Rings
- Rectangular Rings
- Reefing Hooks
- Round Rings
- Tack (Lashing) Hooks
- Triangle Rings
- Stamped Jaw Swivel Snap Shackles
- Swivel Snap Shackles
- Federal Spec. Jaw and Eye Swivel (AN100)
- Swivels, Eye & Eye
- Swivels, Eye & Jaw
- Swivels, Heavy Duty Eye & Eye
- Swivels, Heavy Duty Eye & Jaw
- Swivels, Heavy Duty Jaw & Jaw
- Swivels, Jaw & Jaw
- Threaded Pelican Hook
- Toggle Pins
- 316 Stainless Steel Rigging Toggle
- 316 Stainless Steel Rigging Toggle Traditional
- Triangular Plates
- Additional Buckles (Non-Ratcheting)
- Nylon Webbing
- Over-Center Buckle Assembly With Clips
- Stainless Ratchet Assmeblies With Flat Hooks And 1" Blue Webbing
- With 1" Webbing
- With 1.5" Blue Webbing
- With 1.5" Webbing
- With 2" Blue Webbing
- With 2" Webbing
- With 1" Blue Webbing
- With 2' Blue Webbing
- With 1" Webbing and S Hooks
- With 1-1/2" Webbing
- Ratchet Buckles
- With 1-1/2" Blue Webbing
- Webbing Assemblies
- Delta Link For Webbing
- Double J Hooks
- Web 'Star' Adjuster
- Web Adjuster Slide
- Web Shackle
- Web Threading Plate
- Welded 'S' Hook
- Webbing Kits and Hangers
- Hand Crimp Lifeline Parts
- Lifeline Wire Rope With PVC
- Suncor Quick Attach Lifeline Kits
- Lifeline Wire Rope, Uncoated
- Stanchions & Brace
- Stanchion Base (Suncor - Cast)
- Pelican Hook
- Stanchion Base (Schaefer - Welded)
- Stanchion Caps
- Stanchion Slide with Eye
- Stanchion Ring
- Stanchion & Furling Blocks
- Forged Eyebolts With No Shoulder
- Forged Eyebolts With Shoulder
- 304 Stainless Steel Unwelded Eyebolts
- 316 Stainless Steel Unwelded Eyebolts
- Metric Stainless Welded Eyebolts
- Standard Stainless Welded Eye Bolt
- Cast Lifting Eye Nut
- Forged Lifting Eye Nut
- Machine Eye Bolt
- Lag Eye Screw
- Lag Ring Bolt
- M6 Stainless Metric Shoulder Eye Bolt
- M8 Stainless Metric Shoulder Eye Bolt
- M10 Stainless Metric Shoulder Eye Bolt
- M12 Stainless Metric Shoulder Eye Bolt
- M16 Stainless Metric Shoulder Eye Bolt
- M18 Stainless Metric Shoulder Eye Bolt
- M20 Stainless Metric Shoulder Eye Bolt
- M24 Stainless Metric Shoulder Eye Bolt
- Eyebolts with Rings
- Special Eyebolts
- Asymmetrical Harness Clip
- Harness Clips with Extras
- Heavy Duty Swivel Eye Hook
- Key Lock Spring Clip
- Mooring Hook Kit
- Rounded Harness Clip
- Screw Lock Harness Clip
- Single & Double Swivel Eye Bolt Snaps
- Spring Clip & Eye (Snap Hook)
- Spring Clip & Eye Key Lock
- Spring Clip (Snap Hook)
- Spring Clip w/ Key Lock
- Spring Clip w/ Screw Lock
- Spring Clip w/ Special Gate
- Spring Gate Snap
- Stainless Key Ring
- Trigger Snap
- Unthreaded Shank Hook
- Wide Asymmetrical Clip
- Fixed Eye Snap
- Spring Clip (Wire Lever)
- Swivel Eye Snap
- Asymmetrical Spring Clip
- Double Action Safety Hook, Wichard
- Shock Cord Hooks and Hog Rings
- Anchor Base With Stud
- Heavy Duty Folding Pad Eye
- Hinged/Folding Cast Pad Eye
- Bolt-On Lashing Ring
- Weld On Lashing Ring, Bent
- Stainless Steel Anchor Base With Shackle
- Stainless Swivel Pad Eye
- Stainless Tow Pad Eye
- Stamped Diamond Pad Eye
- Swivel Pad Eye With Ring
- Weld-on Lashing Ring
- Oblong Pad Eyes & Backing Plates
- Pad Eyes, Tie-Down & Footmans Loops
- Heavy Duty/Oblong Pad-eyes
- Stamped Pad Eyes
- Standard Pad Eyes
- Eye Strap Pad Eyes, 2 Hole/4 Hole
- Folding Heavy-Duty Pad Eyes, Forged
- Round Pad Eyes
- Heavy Duty Square Pad Eyes
- Heavy Duty Diamond Pad Eyes
- Large Mast Pad Eyes
- Pad Eyes, Anchor/ Anchor With Swivel
- Pad Eyes, Lifting Ring
- Pad Eyes, Removable Eye Deck Plate
- Side Ring Pad Eyes
- Standard U-Bolt
- U-Bolt w/ Plate (Standard Thread)
- U-Bolt, Bow/Stern Eye
- Long U-Bolt
- Square U-Bolt
- Anchor Points
- Roller Pins
- Stainless Roller Brackets
- Stainless Steel Trailer Tongue
- Stainless Steel Trailer Winch
- Trailer Couplers
- Trailer Hitch Balls
- Trailer Safety Chain
- Trailer U-Bolt
- 12 Volt LED Microstar Lights
- 24 Volt LED Microstar Lights
- LED Tri Star Back Mount
- LED Tri-Star Microstar Light
- LED Tristar Light With Stalk
- Microstar Transformers
- Cutting Tools (Wire Rope & Bolt/Chain)
- Johnson Crimping Tools
- Passivating Fluid
- Stainless Steel Shackler & Bottle Opener
- Steritool Stainless Screwdrivers
- Swage It Swaging Tool
- Stainless Adjustable Wrenches
- Stainless Steel Locking Pliers
- Stainless Steel Spanner Wrenchs
- Hand Riverting Tools
- Steritool Stainless Steel Open End Wrenches
- Anchor Roller, Replacement Wheels
- Anchor Swivel
- Anchor Swivel Multi-Directional
- Anchor Swivel Replacement Pins
- Folding Grapnel Anchors in Various Colors
- Anchor Bracket, Stanchion-Mount
- Anchor Chain Snubber
- Anchor Chocks
- Anchor Tensioner, AT3 Anchor-Tite
- Chain Stopper
- USCG Chain Stopper
- Galvanized Folding Grapnel Anchors
- Horizon Claw Stainless Steel Anchors
Bestsellers
- Stainless Steel Pelican Hook 4
- Quick Attach Lifeline Kit w/ Gate - Closed Body
Authentication
- Forgot password?
![stainless steel yacht stanchions Marine Super Store Ltd](https://d3gpbqyz2aphnw.cloudfront.net/wp-content/uploads/2018/08/Logo-MSS.webp)
Ex-Display & Sample Sale
- Search for:
![stainless steel yacht stanchions stainless steel yacht stanchions](https://d3gpbqyz2aphnw.cloudfront.net/wp-content/plugins/cms-api/assets/account-icon.png)
No products in the basket.
- Base Layers
- Technical T-Shirts
- Sailing Jackets
- Sailing Trousers
- Dinghy Footwear
- Sweatshirts
- Holebrook Samples
- Pelle Samples
- Changing Robes
- Cleaners & Proofers
- Scarves / Snood
- Dinghy Equipment
- Hi-fits / Trousers
- Hiking Equipment
- Hiking Shorts
- Spray Tops / Smocks
- Full Wetsuits
- Shorty Wetsuits
- Long John Wetsuits
- Wetsuit Tops
- Wetsuit Shorts & Trousers
- Summer Wetsuits
- Winter Wetsuits
- Children’s Wetsuits
- Men’s Wetsuits
- Women's Wetsuits
- Wetsuit Sale
- Technical Clothing
- Casual Clothing
- Hats, Gloves, Socks & Scarves
- Watersports
- Accessories Sale
- Amazing Bundle Deals
- Cables & Accessories
- Fixed GPS/plotters
- GPS Antennas
- Handheld GPS/Plotters
- Marine Cameras
- Mounting/Brackets
- Radar Scanners
- Sailing Watches
- Thermal Cameras
- Waterproof Cases
- Accessories
- Fish Finder Sonar
- Depth Instruments
- Multifunction Systems
- Speed Instruments
- Weather Instruments
- Wind Instruments
- Autopilot Accessories
- Cockpit Autopilots
- Onboard Autopilots
- Navigation Charts
- Plotting Aids
- Entertainment Accessories
- Entertainment Systems
- Speakers & Subs
- Electronics
- 4G and WIFI
- Handheld VHF Radio
- Mounted VHF Radio
- VHF Antennas
- Walkie Talkies
- Buoyancy Aids
- Lifejackets
- Children’s Life Jackets
- Commercial Lifejackets
- Harnesses/Bosuns Chair
- Lifejacket Accessories
- Safety Knives
- Safety Lights
- Safety Lines
- PLB & AIS
- Satellite Communicators
- Fire Safety Stick
- Fire Extinguishers
- GPS Tracker
- Liferaft Accessories
- Recovery Devices
- Survival Suit
- Cones & Balls
- Dye Markers
- Horns & Whistles
- RADAR Reflectors
- Bungs & Bailers
- Battery Management
- Chargers & Alternators
- Electrical Other
- Leisure Batteries
- Plugs & Connectors
- Shore Power
- Wind Generator
- USB & Phone Chargers
- Blocks & Terminals
- Circuit Breakers
- Seals / Outlets / Plugs
- Switches & Panels
- Wires & Cables
- Deck Lights
- Interior Lighting
- Navigation Lights
- Searchlights
- Head Torches
- Freshwater Pumps
- Macerator Pumps
- Service Kits
- Toilets/Waste
- Spray Guns & Connectors
- Toilet Accessories
- Toilet Parts
- Waste Tanks
- Ball Valves
- Inlet & Skin Fittings
- Metal Plumbing Fittings
- Plastic Plumbing Fittings
- Diverter Valves
- Non Return Valves
- Deionised Water
- Filters & Purification
- Taps & Sinks
- Water Heaters
- Water Tanks
- Gas Connectors
- Gas Fittings
- Bow Thruster
- Bungs And Self Bailers
- Cleats and Fairleads
- Deck Filler
- Deck Flooring & Protection
- Eye Bolts & U Bolts
- Grab Rail / Handles
- Hooks and Clips
- Latches & Catches
- Shackles & Swivels
- Tiller Extenders & Joints
- Track & Cars
- Winch Handles
- Fans & Windscoops
- Hatch & Inspection Covers
- Hatch Shades
- Hatches & Portlights
- Plastic Hatches
- Yacht / Keelboat Rope
- Dinghy Rope
- Dockline / Mooring Rope
- General Purpose Rope
- Watersports Rope
- Fender Rope
- Rope Accessories
- Furling & Reefing
- Mast, Spars & Sails
- Pins & Rings
- Rigging Screws, Adjusters & Tensioners
- Splicing & Whipping
- Thimbles & Stoppers
- Galvanising Paints
- Thinners & Solvents
- Paint Brushes
- Glue & Adhesives
- Mixing Pots & Accessories
- Resins & Epoxy
- Sealants & Caulking
- Boat Cleaner
- Cleaning Equipment
- Fabric Cleaners & Proofers
- General Cleaners
- Metal Cleaners
- Onboard Cleaner
- Polishes & Waxes
- Vinyl Cleaner
- Teak Cleaner
- All Zinc Anodes
- Zinc Shaft / Prop
- Zinc Engine / Outdrive
- All Aluminium Anodes
- Aluminium Hull
- Aluminium Shaft / Prop
- Aluminium Engine / Outdrive
- All Magnesium Anodes
- Magnesium Hull
- Magnesium Shaft / Prop
- Magnesium Engine / Outdrive
- Bow Thruster Anodes
- Hanging Anodes
- Bolts & Fixings
- Backing Pads
- Lubricants & Grease
- Power Tools
- Marine Prepacks
- Dehumidifiers
- Blowers & Exhaust
- Engine Oil & Additives
- Oil Extractors & Filters
- Shaft Bearings
- Pumps & Inflation
- Tender Accessories
- Petrol Engines
- Boat Fender
- Dock Fender
- Edging Strip
- Hooks & Pumps
- Mooring Buoy
- Step Fenders
- Anchor Bags
- Anchor Connectors
- Anchor Lines
- Anchor Windlass
- Compensators
- Personal Craft
- Engine Covers
- Fuel Tanks & Lines
- Fuel Connectors
- Kill Switches
- Propeller Bags
- Straps & Ratchets
- Flag Staff & Holder
- Lighters & Matches
- Cabinet Fridges
- Cooling Kits
- Portable Fridge/freezers
- Chandlery Misc
- Cup Holders
- Sail Knives
- Seats & Cushions
- Games & Toys
- Gift Vouchers
- Nautical Gifts
- Novelty Hats
- Anemometers
- Clocks & Barometers
- Teak Fittings
- Weather Stations
- Galley Equipment
- Tumblers & Glasses
- Water Bottles & Flask
- Inflatable Paddleboards
- Hard Paddleboards
- Inflatable Kayaks
- Handles / Bridles
- Throw Lines
- Swim Accessories
- Sea Scooter
- Free Delivery on UK mainland orders over £100 excl. Highlands / rural areas
![New Image Stanchion Stainless Steel - New Image](https://d3gpbqyz2aphnw.cloudfront.net/wp-content/uploads/2021/03/stanchion-stainless-steel-new-image-9830.webp)
Stanchion Stainless Steel
£ 20.95
Out of Stock This item is currently unavailable to purchase.
Want to be notified when this product is back in stock?
- Description
- Availability
Stainless steel stanchions feature an electrolytical polishing surface treatment. Using this process improves noticeably the resistance to marine corrosion and contributes to a long-lasting shiny stainless steel surface. These stanchions are made from 25 mm tube, with a cylindrical tip.
Username or email address *
Password *
Remember me Log in
Lost your password?
Email address *
A password will be sent to your email address.
![stainless steel yacht stanchions Stainless Steel Marine](https://stainlesssteelmarine.com/wp-content/uploads/2021/12/logo.jpg)
- $ 0.00 0 items
![Lifeline Stanchion Stainless Steel 316 Marine Grade Drawing S3609 Lifeline Stanchion Stainless Steel 316 Marine Grade Drawing S3609](https://stainlesssteelmarine.com/wp-content/uploads/2017/09/Lifeline-Stanchion-Stainless-Steel-316-Marine-Grade-Drawing-S3609.jpg)
Stainless Steel STANCHION 1 in. x 24 in. 2 HOLES
$ 92.97
Stainless Steel Lifeline Stanchion 1 in. x 24 in. 2 Holes Marine Grade
Stainless Steel Marine offers the Lifeline Stanchion available in a variety of heights, as well as, custom heights. This stanchion is made from grade 316 stainless steel for maximum corrosion resistance and durability. It is ideal for sailboat and powerboat railings.
Description
Additional information.
- Reviews (0)
Weight | 1.32 lbs |
---|---|
Related Items | S3609 |
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Name *
Email *
Save my name, email, and website in this browser for the next time I comment.
Related Products
![stainless steel yacht stanchions Top Slide Hinged Stainless Steel 316 Marine Grade S3683-0000](https://stainlesssteelmarine.com/wp-content/uploads/2017/09/Top-Slide-Hinged-Stainless-Steel-316-Marine-Grade-S3683-0000.jpg)
Stainless Steel TOP SLIDE HINGED 7/8 in.
Stainless steel top slide hinged 1 in..
![stainless steel yacht stanchions Multi-Directional Top CapStainless Steel 316 Marine Grade S3684-000](https://stainlesssteelmarine.com/wp-content/uploads/2017/09/Multi-Directional-Top-CapStainless-Steel-316-Marine-Grade-S3684-000.jpg)
Stainless Steel MULTIDIRECTIONAL TOP HINGE 7/8 in.
Stainless steel multidirectional top hinge 1 in..
![stainless steel yacht stanchions 80 Degree and Heavy Duty Side Deck Hinge Stainless Steel 316 Marine Grade S3682](https://stainlesssteelmarine.com/wp-content/uploads/2017/10/80-Degree-and-Heavy-Duty-Side-Deck-Hinge-Stainless-Steel-316-Marine-Grade-S3682.jpg)
Stainless Steel DECK HINGE REMOVABLE PIN
Stainless steel deck hinge 90 deg.
![stainless steel yacht stanchions Deck Hinges Degree and Concave Stainless Steel 316 Marine Grade S3682](https://stainlesssteelmarine.com/wp-content/uploads/2017/10/Deck-Hinges-Degree-and-Concave-Stainless-Steel-316-Marine-Grade-S3682.jpg)
Stainless Steel CONCAVE DECK HINGE REMOVABLE PIN
Stainless steel concave deck hinge, stainless steel angle deck hinge screw, stainless steel angle deck hinge drilled.
![stainless steel yacht stanchions Lifeline Stanchion Stainless Steel 316 Marine Grade Drawing S3609](https://stainlesssteelmarine.com/wp-content/uploads/2017/09/Lifeline-Stanchion-Stainless-Steel-316-Marine-Grade-Drawing-S3609.jpg)
![stainless steel yacht stanchions Logo](https://cdn11.bigcommerce.com/s-8n8shfszlt/images/stencil/original/sailrite_500x100_1709837316__49154.original.png)
- [[html title]]
Rectangle Base Life Line Stanchion Stainless Steel
- Discontinued
- Create New Wish List
Correlated Items
Product details.
- Description
- Specifications
- Shipping Restrictions
- Questions & Answers
Rectangle Base Life Line Stanchion Stainless Steel is a heavy duty rectangle base used for attaching boat stanchions. This stanchion base is Type 316 stainless steel for maximum corrosion resistance and durability. This boat stanchion base is installed using four screws. Mounting screws not included.
This item is of a size or length that requires additional shipping fees.
Lithium Ion Tools can ONLY be shipped Ground to the 48 contiguous United States.
Flammable items can ONLY be shipped Ground to the 48 contiguous United States.
Lithium-Ion Batteries can ONLY be shipped Ground to the 48 contiguous United States.
Free Ground shipping is not applicable to this item.
Adding this item to your shopping cart will eliminate any air transportation shipping methods.
Adding this item to your shopping cart will eliminate the Post Office as a shipping selection.
This item cannot ship to California due to state restrictions.
Customers Also Purchased
![90 Degree Rectangle Base 1" Stainless Steel 90 Degree Rectangle Base 1" Stainless Steel](https://cdn11.bigcommerce.com/s-8n8shfszlt/images/stencil/500x659/products/25485/41392/dda66544-364f-4bdc-b271-c9901a57f999_294348_1__50023.1708718626.jpg?c=1)
90 Degree Rectangle Base 1" Stainless Steel
![45 Degree Rectangle Base 1" Stainless Steel 45 Degree Rectangle Base 1" Stainless Steel](https://cdn11.bigcommerce.com/s-8n8shfszlt/images/stencil/500x659/products/30487/57444/965b5201-7ade-4dad-9bb3-d6d760c72612_286385_1__94873.1708751597.jpg?c=1)
45 Degree Rectangle Base 1" Stainless Steel
![60 Degree Rectangle Base 1" Stainless Steel 60 Degree Rectangle Base 1" Stainless Steel](https://cdn11.bigcommerce.com/s-8n8shfszlt/images/stencil/500x659/products/34033/68839/609e2716-d4e9-49fb-8c0e-60f42851408d_286814_1__31226.1708772029.jpg?c=1)
60 Degree Rectangle Base 1" Stainless Steel
![Lifeline Base Stainless Steel Lifeline Base Stainless Steel](https://cdn11.bigcommerce.com/s-8n8shfszlt/images/stencil/500x659/products/30754/58314/0d3a5d7d-f204-4212-8383-6e2d33f63528_116895_1__09955.1708753154.jpg?c=1)
Lifeline Base Stainless Steel
Stay in the loop never miss sale announcements, how-to blogs, new product launches, helpful tutorials and more.
(001) 401-739-1140 -- (001) 401-739-1149 | |
| |
By far the most common on boats built in North America, 1" OD SS Lifeline Stanchions are made from 1" OD (25.4mm) polished Stainless Steel tube with a .065" wall. They have been produced with a variety of Top styles, and are occasionally, but not commonly, Tapered. See also, , Aluminum Stanchions, , and |
The SS Stanchions listed below are made from 1" OD (25.4mm) polished Stainless Steel tube with a .065" wall. Produced with a variety of Top styles, the most common are listed below and normally available from stock. 1" OD Stanchion tube only is also available, See . 1" OD Stanchions are listed separately, See . | |
: SA 36-R24-1: : SA 36-R24-2P: 1" OD SS Stanchion with is 24" to Top hole center. Cast SS Ring Top is welded in place. Double version has intermediate hole at 13" from the bottom, and is standard with plastic bushings (5/16" ID) in intermediate hole. Ring Top Stanchions are also available on a Custom basis at other lengths and with different intermediate hole configurations, please contact us with complete specifications.
| |
: SA 36-C24-1: : SA 36-C24-2P: 1" OD SS Stanchion with is 24" to Top hole center, cast SS Conical Top is welded in place. Double version has intermediate hole at 12" from the bottom, and is standard with plastic bushings (5/16" ID) in intermediate hole. Conical Top Stanchions are also available on a Custom basis at other lengths and with different intermediate hole configurations, please contact us with complete specifications.
| |
: SA 36-D24-1: : SA 36-D24-2P: 1" OD SS Stanchion with is 24" to Top hole center, cast SS Dome Top is welded in place. Double version has intermediate hole at 12" from the bottom, and is standard with plastic bushings (5/16" ID) in intermediate hole. Dome Top Stanchions are also available on a Custom basis at other lengths and with different intermediate hole configurations, please contact us with complete specifications.
| |
: SA 36-F24-1: : SA 36-F24-2S: 1" OD SS Stanchion with highly polished, welded is 24" to Top hole center. Double version has intermediate hole at 12" from the bottom, and is standard with solid insert (3/8" ID) intermediate hole. Flat Top Stanchions are also available on a Custom basis at other lengths and with different intermediate hole configurations, please contact us with complete specifications.
| |
: SA 36-FP24-1: : SA 36-FP24-2S: 1" OD SS Stanchion with is 24" to Top hole center. FP Flat Top is produced by inserting Black Delrin plug before turning stanchion to length, upper hole is drilled through solid insert. Double version has solid insert intermediate hole (1/4" ID) at 12" from the bottom. Black plug end may age gray. and others.
| |
& Brace Hole: SA 36-FP24-1B: & Brace Hole: SA 36-FP24-2B: | |
1" OD SS Stanchion with is 24" to Top hole center and has 1/4" thru-hole at 7 1/4" from the top for use with Gate Brace. FP Flat Top is produced by inserting Black Delrin plug before turning stanchion to length, upper hole is drilled through solid insert. Double version has solid insert intermediate hole (1/4" ID) at 12" from the bottom. Black plug end may age gray. and others.
| |
-------------------- 1" OD SS Schaefer Stanchion has Flatish black plastic Top plug inserted before holes are pressed. Double version has solid insert intermediate hole (3/8" ID) at 12" from the top hole.
| |
The SS Stanchions listed below are made from 1" OD (25.4mm) polished Stainless Steel tube with a .065" wall. Tapered to approximately 5/8" and welded to a variety of Top styles, the most common are listed below. Other configurations of 1" SS Stanchions are available, please contact us with complete specifications. SS Stanchions are actually Metric 25mm OD, . | |
: SA 36-TT24-1: : SA 36-TT24-2SF: | |
1" OD SS Stanchion with is 24" to Top hole center. Stanchion is tapered to approximately 5/8" and welded to SS Tube. Double version is standard with flared (3/8" ID) for intermediate hole at 12" from the bottom. Stanchions are also available on a Custom basis at other lengths and with different intermediate hole configurations, please contact us with complete specifications.
|
|
~ Back to Stanchions Main Page ~
~ Back to Hardware Main Page ~
Properties of Austenitic, Heavily Alloyed, High-Nitrogen Steels Made by Various Casting, Special Electrometallurgy, and Hot Deformation Methods
- MANUFACTURE OF FERROUS AND NONFERROUS METALS
- Published: 27 June 2022
- Volume 2022 , pages 559–568, ( 2022 )
Cite this article
- M. V. Kostina 1 , 2 ,
- L. G. Rigina 1 , 3 ,
- S. O. Muradyan 1 ,
- A. I. Il’inskii 4 &
- V. S. Kostina 1
75 Accesses
Explore all metrics
The structure, the phase composition, and the mechanical properties of high-strength austenitic steel 05S–(21–22)Cr–15Mn–8Ni–(1–2)Mo–V–N (05Kh(21–22)AG15N8MF grade) having an equilibrium nitrogen content of 0.5% (which is below the solubility limit under standard conditions) and melted in an open induction furnace are studied in the cast, hot-deformed, and heat-treated states. The steel having the same metallic base and a overequilibrium nitrogen content of 0.65–0.79% (which is above the solubility limit under standard conditions) and melted in a plasma arc furnace is also analyzed. The mechanical properties of these steel versions, including the impact toughness at low test temperatures, are compared, and their relationship with the structural-phase state of the steels is analyzed. The hot-forged steels exhibit an increase in the strength with the nitrogen concentration and a symmetrical decrease in the impact toughness. An increase in the forging reduction ratio of steel with 0.7% N is found to increase the yield strength and ultimate tensile strength but to decrease the cold resistance. The grain size and the presence of a nitride phase, which precipitates at the temperatures of the end of hot forging, exert a significant effect on the level of properties. To achieve a good combination of high strength properties and cold resistance, the nitrogen concentration in 05Kh21AG15N8MF steel should not to exceed 0.65%.
This is a preview of subscription content, log in via an institution to check access.
Access this article
Subscribe and save.
- Get 10 units per month
- Download Article/Chapter or eBook
- 1 Unit = 1 Article or 1 Chapter
- Cancel anytime
Price includes VAT (Russian Federation)
Instant access to the full article PDF.
Rent this article via DeepDyve
Institutional subscriptions
![stainless steel yacht stanchions](https://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS0036029522060131/MediaObjects/11505_2022_10996_Fig1_HTML.png)
Similar content being viewed by others
Effect of an overequilibrium nitrogen content on the structure, phase composition, and mechanical properties of low-alloy steel.
![stainless steel yacht stanchions stainless steel yacht stanchions](https://media.springernature.com/w215h120/springer-static/image/art%3Aplaceholder%2Fimages/placeholder-figure-springernature.png)
Effect of heat treatment on the mechanical properties and the structure of a high-nitrogen austenitic 02Kh20AG10N4MFB steel
Effect of alloying on the strength properties and the hardening mechanisms of nitrogen-bearing austenitic steels after hot deformation and annealing.
L. G. Rigina, Ya. M. Vasil’ev, V. S. Dubov, et al., “Nitrogen alloying of steels,” Elektrometallurgiya, No. 2, 14–19 (2005).
Google Scholar
L. G. Rigina, “Research and development of ESR and ESRD technologies for chromium–manganese nitrogen alloyed steels,” Candidate’s Dissertation in Engineering (Moscow, 2005).
H. Berns, “Alloy development and processing,” in Proceedings of Conference on High Nitrogen Steels HNS-2004 (Ostend, 2004), Vol. 1, No. 4, pp. 271–281.
V. A. Malyshevskii, G. Yu. Kalinin, V. V. Tsukanov, and O. V. Fomina, “Modern low-magnetic steels for shipbuilding,” Sudostroenie, No. 5, 19–21 (2009).
Ts. Rashev, Production of Alloy Steel (Metallurgiya, Moscow, 1981).
B. I. Berezhko and A. G. Ignatenko, “Quality of austenitic steel depending on the method of melting and alloying it with nitrogen,” in Proceedings of Conference on High-Nitrogen Steels (Inst. Metallofiz., Kiev, 1990), pp. 15–16.
I. P. Malkin, “Production of nitrogen-alloyed special steels,” Candidate’s Dissertation in Engineering (Moscow, 1966).
G. Stein, J. Menzel, and C. Choudhure, “Industrial manufacture of massively nitrogen-alloyed steels in pressure ERS furnace,” Steel Times, No. 3, 146–150 (1989).
Ts. Rashev, M. Venkov, I. Popov, et al., “Machines for the production of high-nitrogen steels,” in Proceedings of International and Scientific Conference High-Nitrogen Steels-89 (Varna, 1989).
B. Raj, High Nitrogen Steels and Stainless Steels. Manufacturing, Properties and Applications (Woodhead Publishing, 2004).
Ts. V. Rashev, High-Nitrogen Steels. Metallurgy under Pressure (Prof. Marine Drinov, Sofia, 1995).
A. A. Sisev, S. G. Tsimerman, M. V. Kostina, A. I. Il’inskii, M. M. Perkas, and L. G. Rigina, “Development of an industrial technology of plasma-arc remelting of nitrogen-containing 05Kh21AG15N8MF steel,” Elektrometallurgiya, No. 12, 3–11 (2017).
S. O. Muradyan, “Structure and properties of cast corrosion-resistant nitrogen-alloyed steel,” Candidate’s Dissertation in Engineering (Moscow, 2016)
M. V. Kostina, P. Yu. Polomoshnov, V. M. Blinov, S. O. Muradyan, and V. S. Kostina, “Cold resistance of a new cast Cr–Mn–Ni–Mo–N steel with 0.5% N. Part 1,” Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 62 (11), 894–906 (2019).
CAS Google Scholar
Ya. S. Vishnevetskii, Free Forging (Vysshaya Shkola, Moscow, 1972).
K. H. Lo, C. H. Shek, and J. K. L. Lai, “Recent developments in stainless steels,” Mater. Sci. Eng., R 65 , 39–104 (2009).
B. Hwang, T.-H. Lee, S.-J. Park, Ch.-S. Oh, and S.‑J. Kim, “Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr–10Mn austenitic steels,” Mater. Sci. Eng., A 528 (24), 7257–7266 (2011).
Article CAS Google Scholar
Z. Yuan, Q. Dai, X. Cheng, K. Chen, and W. Xu, “Impact properties of high-nitrogen austenitic stainless steels,” Mater. Sci. Eng., A 475 , 202–206 (2008).
Article Google Scholar
S. Wang, K. Yang, Y. Shan, and L. Li, “Plastic deformation and fracture behaviors of nitrogen-alloyed austenitic stainless steels,” Mater. Sci. Eng., A 490 (1–2), 95–104 (2008).
O. V. Fomina and M. V. Kostina, “Influence of the temperature–deformation HTMT parameters on the formation of excess phases in high-strength austenitic nitrogen-containing steel,” Vopr. Materialoved., No. 2 (90), 17–28 (2017).
O. V. Fomina, T. V. Vikhareva, V. B. Gribanova, and Yu. M. Markova, “Metadynamic recrystallization kinetics during thermomechanical treatment of nitrogen-containing steel,” Materialoved., No. 9, 3–11 (2018).
V. A. Malyshevskii, G. Yu. Kalinin, O. V. Fomina, T. V. Vikhareva, and A. A. Kruglova, “Formation of the structure of nitrogen-containing steel under thermal deformation and its relationship with mechanical properties,” Elektrometallurgiya, No. 9, 23–31 (2014).
O. V. Fomina and T. V. Vikhareva, “Formation of the structure of sheets made of high-strength nitrogen-containing austenitic 04Kh20N6G11M2AFB steel during multipass hot deformation,” Tyazheloe Mashinostr., No. 6, 2–8 (2018).
Download references
ACKNOWLEDGMENTS
We thank the Electrostal Plant for its significant practical contribution to the work on ESR and PAR steels.
This work was supported by the program of the Presidium of the Russian Academy of Sciences RAN I.55 “The Arctic—Scientific Fundamentals of New Technologies for Exploration, Conservation, and Development” (project no. 0087-2018-0020) and was performed within the framework of state assignment no. 075-00328-21-00.
Author information
Authors and affiliations.
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, 119334, Moscow, Russia
M. V. Kostina, L. G. Rigina, S. O. Muradyan & V. S. Kostina
Moscow Aviation Institute (National Research University), 125993, Moscow, Russia
M. V. Kostina
Central Scientific Research Institute of Machine Building and Metalworking TsNIITMASh, 115088, Moscow, Russia
L. G. Rigina
Metallurgical Plant Electrostal, 144002, Elektrostal’, Moscow oblast, Russia
A. I. Il’inskii
You can also search for this author in PubMed Google Scholar
Corresponding author
Correspondence to M. V. Kostina .
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by K. Shakhlevich
Rights and permissions
Reprints and permissions
About this article
Kostina, M.V., Rigina, L.G., Muradyan, S.O. et al. Properties of Austenitic, Heavily Alloyed, High-Nitrogen Steels Made by Various Casting, Special Electrometallurgy, and Hot Deformation Methods. Russ. Metall. 2022 , 559–568 (2022). https://doi.org/10.1134/S0036029522060131
Download citation
Received : 14 October 2021
Revised : 08 November 2021
Accepted : 10 November 2021
Published : 27 June 2022
Issue Date : June 2022
DOI : https://doi.org/10.1134/S0036029522060131
Share this article
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
- phase composition
- austenitic steel
- deformation
- impact toughness
- cold resistance
- Find a journal
- Publish with us
- Track your research
![stainless steel yacht stanchions Logo](https://www.westmarine.com/on/demandware.static/Sites-WestMarine-Site/-/default/dwe6507d8f/images/wm-logo.png)
Please verify you are a human
Access to this page has been denied because we believe you are using automation tools to browse the website.
This may happen as a result of the following:
- Javascript is disabled or blocked by an extension (ad blockers for example)
- Your browser does not support cookies
Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
Reference ID: 90c44f10-4b43-11ef-ae56-b95e4cc8ca22
Powered by PerimeterX , Inc.
Post comment
or continue as guest
![](http://dorama.fun/777/templates/cheerup/res/banner1.jpg)
COMMENTS
Stainless Steel Stanchions & Sockets. The majority of our Stainless Steel Stanchions & Sockets are made from Marine Grade 316. Cast by a team of highly experienced specialists, then hand polished to give a depth of shine that differentiates the exceptional from the average.
Tapered 1"dia. stanchions in Type 316 stainless steel with two lifeline wire holes at 12" spacing, except for 18" model with only one hole.
Yacht Stanchions 316 Stainless Steel. Stanchions with Cone or Ball Top, Various Length Available. Usually Out for Next Day Delivery 2:00pm Work Day Cut-Off
You know us as the leading U.S. maker of custom stainless boat parts. Now, buy stock White Water Marine lifeline stanchions manufacturer-direct, in hundreds of configurations.
Trapezoidal SS Stanchion Base with Double Bails and a 5° inboard angle. Formed, Welded SS Base is (maximum) 5" long x 2 3/4" wide x 1/8" thick, and attaches to Deck with (4) 1/4" screws on 4" (inboard) x 2 3/4" (outboard) hole centers in 'S' Base pattern, below.Base has formed drainage channel to prevent water build-up in socket.
SS Lifeline Stanchions - 1" OD : By far the most common on boats built in North America, 1" SS Lifeline Stanchions are made from 1" OD (25.4mm) polished Stainless Steel tube with a heavy .065" wall.
Any custom stanchion design is buildable. Hundreds of different configurations possible. All tubing heavy-wall stainless. Choose 304 stainless or 316 grade.
Using stainless steel for your stanchions and other boating equipment is ideal because of its durability and corrosion resistance. Having your boat properly outfitted with stanchions can be all the difference in safety and a more comfortable ride on the water. At Stainless Outfitters Inc., we can manufacture and supply you with the necessary stanchions and anchors to ensure that your boat ...
Our stainless steel range features an electrolytical polishing surface treatment. Using this process improves the resistance to marine corrosion and contributes to a long-lasting brilliant stainless steel surface.
Description 304 Stainless Steel Stanchions. Heavy Duty, beautifully made and mirror polished for the best finish. Stanchion tops are 316 stainless steel.
The Lifeline Stanchion is available in a variety of heights, as well as custom heights. This stanchion is made from grade 316 stainless steel for maximum corrosion resistance and durability. It is ideal...
At Stainless Outfitters Inc, our raw materials are of the highest quality, produced in North America and our suppliers provide material certifications to ensure the maximum corrosion resistance.
Boat Stanchions and lifelines from Bosun Supplies including marine hardware
Stainless steel stanchions feature an electrolytical polishing surface treatment. Using this process improves noticeably the resistance to marine corrosion and contributes to a long-lasting shiny stainless steel surface. These stanchions are made from 25 mm tube, with a cylindrical tip.
Stainless Steel Marine offers the Lifeline Stanchion available in a variety of heights, as well as, custom heights. This stanchion is made from grade 316 stainless steel for maximum corrosion resistance and durability.
Rectangle Base Life Line Stanchion Stainless Steel is a heavy duty rectangle base used for attaching boat stanchions. This boat stanchion base is type 316 stainless steel for maximum corrosion resistance and durability.
SS Lifeline Stanchions - 1" OD : By far the most common on boats built in North America, 1" OD SS Lifeline Stanchions are made from 1" OD (25.4mm) polished Stainless Steel tube with a .065" wall.
Description 316 Stainless Steel Stanchion Base. Supplied with a stop screw. Base size - (L) 95mm x (W) 80mm x (H) 55mm Diameter - 25mm. Available in two versions:
Abstract The structure, the phase composition, and the mechanical properties of high-strength austenitic steel 05S-(21-22)Cr-15Mn-8Ni-(1-2)Mo-V-N (05Kh(21-22)AG15N8MF grade) having an equilibrium nitrogen content of 0.5% (which is below the solubility limit under standard conditions) and melted in an open induction furnace are studied in the cast, hot-deformed, and heat ...
Shop VETUS Stainless Steel Stanchion, 17-9/16" High, One Hole at West Marine. Visit for prices, reviews, deals and more!
Zheleznodorozhny Tourism: Tripadvisor has 1,133 reviews of Zheleznodorozhny Hotels, Attractions, and Restaurants making it your best Zheleznodorozhny resource.
A residential and industrial region in the south-east of Mocsow. It was founded on the spot of two villages: Chagino (what is now the Moscow Oil Refinery) and Ryazantsevo (demolished in 1979). in 1960 the town was incorporated into the City of Moscow as a district. Population - 45,000 people (2002). The district is one of the most polluted residential areas in Moscow, due to the Moscow Oil ...
Skip to main content. Discover. Trips