what is a two masted yacht called

What’s a Boat with Two Masts Called: Two masted sailing boat types

Two-masted sailing boats will always have a special place in the hearts of many sailors. Many sailors consider two-masted sailing boats to be the most attractive and graceful of all sailing vessels. They have an obvious elegance, but what do you know about these two masted sailboats? Let’s find out!

Among the most important aspects are the fact that two-masted sailing boats offer greater sail balance, engineless sailing and more heavy weather options.

Even if the two masted sailboats are not so common, the sailing world has a few of them and what is more, they represent a proof of the evolution and improvement of sailing boats over time. There are an almost endless number of ways sailors have arranged their sails on boats over the years.

Two-masted sailing boats are classified according to the size and position of their masts.

There are different two-masted sailing boat types and two of the most popular are schooners and yawls.

The origins of schooner-rigged vessels are unknown, however there is evidence of them in paintings by Dutch maritime painters dating back to the early 17th century.

Schooners were developed by Northern European countries, while yawls are believed to be descended from the fishing boats of England.

Sailboats with two masts include yawls, ketches, schooners and brigs (known as brigantines). Yawls and ketches are both types of sloops, which means they have one mast, but the difference between them is that the yawl has a second mast stepped at the bow.

Ketches and Yawls have a lower mast, unlike schooners that have a taller aft mast, which is also known as mizzen. Ketch sailing boats have something specific: the aft mast is  located in front of the rudder post.

The yawl’s mizzenmast serves as a counterbalance for the jib sails, so that it doesn’t have to be hung from the forestay (the rope running from the top of the mast down to the deck). They’re usually smaller than ketches and have less rigging because they don’t carry as many sails as a sloop with two masts.

Yawls are faster sailboats than schooners because they’re lighter, more balanced and easier to sail upwind. They can also go faster because their shorter sails catch more wind. But schooners have larger payloads, which means more people or cargo — an important consideration for long trips without resupply.

Schooners are two-masted sailing boats, but instead of having a jib sail like yawls, ketches and most sloops, schooners have a fore-and-aft spanker sail like a gaff sailboat. These two-masted sailboats have at least two masts, the foremast being slightly shorter than the main mast.

Schooners are larger than yawls, ketches and other sloops and weren’t used very much in modern times because they were more difficult to handle. They’re still used in racing competitions today.

Schooners have a longer bow portion than yawls. The mainsail is aft of the mast, and either one or two foresails are in front of it. In a schooner, these are triangular sails; in a yawl, they’re trapezoidal. Yawls have bowsprits — poles that extend beyond the bow for the jib and stay sail to be attached. Schooners have small bowsprits that can support jibs but not large sails.

The term ketch derives from the word catch, which hints to how it got its name in the 17th century. Ketches were initially intended to meet the specific requirements of offshore net fishing.

Ketch is a type of sailboat that features two masts and two sails, commonly used as a racing and cruising boat. The mainmast of this two-masted sailboat is typically taller than the mizzen mast (aft-mast). Its name derives from catch.

Taller masts allow you to use larger sails, so ketch boats are able to achieve better speeds than similar boats with only one mast. Some ketch designs feature a gaff rig, which is similar to a yawl, while others feature a yawl rig, which looks like a traditional sloop.

Ketch boats may look easy to sail but the slightest mistake can lead to disaster. You must be careful when operating this type of boat because it does not have as much stability as other boats, especially when you’re manoeuvring in tight quarters or windy conditions.

A ketch may also be a small recreational boat with only one head-sail in use. Many modern designs have moved away from sail altogether and are powered by engine, while others use both sails as well as engines depending on circumstance.

The brigantine was once a tiny ship that carried both oars and sails. It was a favorite of Mediterranean pirates.

A brigantine is a square-rigged sailing boat with two masts, with a fully square-rigged foremast and two sails on the mainmast.

The mainmast is stepped forward of the deck, making it possible to sail into the wind using a triangular headsail known as a jib. The brig’s foremast is shorter than the mainmast.

The name of this type of boat with 2 masts is derived from the Italian word “brigantino”, which means brigand.

Also, this two-masted sailing boat type was most commonly used for coastal trade and pirate hunting. The brigantine had an advantage over other ships of the time because it could sail against the wind using both sails, making it easier to travel against strong winds.

Faster and easier to manoeuvre than a sloop or schooner, it was used for piracy and espionage.

FAQ: Two-Masted Sailboats

What do you call a two-masted sailboat.

Two-masted sailboats are of several types: yawls, schooners, ketches or brigantines.

Why do some sailboats have two masts?

The vast majority of sailboats feature a mainsail and a jib. These two-masted sailboats provide several advantages in terms of speed and maneuverability. These two masts may be configured in a variety of ways.

The foresail directs air beyond the back of the mainsail, generating greater power from the wind. In order to help menouvering, the foresail can be backed. So, adding sails makes things simpler for bigger boats, making them easier to handle in heavy winds.

What is the difference between a ketch and a yawl sailboat?

Because they are lighter, more balanced, and easier to sail upwind, yawls are faster sailboats than schooners. They can also go at a faster speed since their shorter sails collect more wind. Schooners, on the other hand, have higher cargoes, which means more people or freight – a crucial consideration for extended journeys without replenishing.

What is a one masted sailboat?

It's a sailing boat having a single mast roughly one-third the length's aft of the bow. A sailboat with a single mast usually has one headsail in front of the mast and one mainsail behind the mast.

What is a two-masted square rigger?

It's a brig with two square-rigged masts. A gaff-rigged fore-and-aft sail also called a "mizzen" is used in addition to jibs and staysails (stays'ls) before the foremast and staysails between the masts.

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

7 Popular Sailboats with Two Masts (With Pictures & Prices)

Sailboats can come with one, two, or even more masts. You can also have different-sized masts placed on the front, back, or middle of your vessel.

Below, I have listed popular sailboats that have two masts.

Let’s get started!

Table of Contents

Check also: Average sailboat price examples .

Things to Know About Sailboats With Two Masts

When looking for sailboats with two masts, you should know what you are looking for. A Ketch is one type of sailboat with two masts.

Knowing this term can help you to nail down your search when looking for a boat with two masts.

These boats come in many shapes and sizes as well as many different types of designs. Generally, these types of boats have the taller mast being forward and the smaller mast near the aft.

Yawls are also boats that feature two masts.

These also come in multiple types and designs. The difference between the Ketch and the Yawl is that the Yawl has the larger mast in the aft instead of forward. They also have smaller sails and can be easier to handle.

Another type of sailing ship that features two masts is a Brigantine.

This ship has mixed sailing rigs which commonly features squared sails on the front part of the ship and triangular sails on the back of the ship.

These boats are often larger and require more people to handle them.

7 Great Used Boats with Two Masts

There are many benefits to used boats including a lower cost. You can get a larger boat for a lower cost if you choose to buy used.

When looking at used boats, you need to make sure you look at the boat and its features thoroughly to make sure everything is in great working order.

If you do not feel confident that you can properly look over a used vessel, you can even hire a marine inspector to look it over and let you know of any potential issues or needed repairs. You can use this assessment to decide what is worth it, or if the needed repairs fall into the budget.

It is much more common for a used boat to have more than one mast. This is because the newer sailboat models are creating their new designs with just one mast.

One mast ships are easier to handle and manage so new designs are trying to optimize design and ease of sailing.

Below are great used sailboats with two masts which I have arranged by price .

1. 1976 Westerly Center Cockpit Ketch

This 1976 Westerly Center Cockpit Ketch is a small 36-foot long sailboat with two masts. This is a solidly built cruising vessel that features a center cockpit ketch layout.

This boat has a small 38 horsepower engine perfectly fit to navigate its smaller size.

The interior features 1 single berth and 3 double berths all in 3 cabins. This boat also has 2 full heads onboard.

You also have a full galley with a 4 burner stove, refrigerator and freezer, stainless steel sink, and microwave oven.

This boat makes great use of limited space and offers many amenities in a much smaller frame.

Price: $37,000.00

2. 1978 Jeanneau Gin Fizz

The 1978 Jeanneau Gin Fizz is a trusted and popular two-masted design capable of crossing the Atlantic Ocean .

This boat is also very spacious for a boat that is only 38 feet in length. This model also won an award for “security, comfort, ease of handling, and ability to handle varying conditions.”

This particular used model has been well maintained and upgraded over the years.

This boat is great for family cruising, offshore passages, and even racing.

This boat features a 50 horsepower engine to help navigation.

Inside you can find 2 cabins and 1 head. You will be highly comfortable with air conditioning and other interior luxuries.

Price: $46,000.00

3. 1979 Freedom 40

The Freedom 40 is a classically designed centerboard ketch with two masts. This boat is a great sailor loaded for cruising on the wide-open blue water.

This sailboat is 40 feet in length and features accommodations for six people that include a double-v berth, another double berth, and two single berths.

There is also a full head that can be accessed both from the main salon and aft cabin.

This boat was recently painted and features newer interior fabrics, forced air heating, and much more.

You can find a dinette with separate freezer and refrigeration compartments, a stove with an oven and broiler, a double stainless steel sink, plenty of storage, and other interior features.

This boat also comes with an outboard motor with 50 horsepower and a hard bottom inflatable dinghy.

Price: $54,900.00

4. 1977 Puma 38 Ketch

The Puma 38 Ketch is a two-masted sailboat built for racing like the rest of the Puma sailing line. This brand prides itself on speed and maneuverability.

The 1977 Puma 38 is 34 feet in length with a backup diesel engine that can help you get where you need to go as well as docking into a slip. This motor features more horsepower than the average sailboat with 45 horsepower.

Features on this vessel include autopilot, electrical and manual bilge pumps, a full marine head, running hot water, and refrigerator.

This boat is made of fiberglass with teak finishes and looks well kept. You can find this boat in Spain if you are interested in purchasing it.

Price: $66,099.00

5. 1973 Morgan Out Island 41

Originally designed by Charley Morgan, the Morgan Out Island 41 is a center cockpit shoal-draft cruiser that features two masts.

This larger boat is 41 feet 3 inches in length and features many amenities.

This boat is the tri-cabin version and features interior heating, pressurized hot and cold water, a 2 burner gas oven, and a fridge.

This boat also seats up to 7 in the 3 cabins and the saloon. There are also 2 full heads on this vessel.

This boat is even equipped with an inboard motor . Inboard motors are easier when it comes to navigation including backing up, which is generally hard for sailboats to do.

Price: $68,596.00

6. 1970 Hinckley Bermuda 40

This 1970 Hinckley Bermuda 40 is a gorgeous two-masted boat painted with a mixture of desert sand and oyster white on the exterior and features a beautiful and well-kept deck.

This boat has previously had all her systems replaced and upgraded and features a 40 horsepower engine that was new in 2014.

This boat features a mahogany interior and sleeps up to 6 people in 2 cabins. You can also find a 3 burner propane stove with oven, fridge and compressor, new countertops and plenty of storage.

This boat is a stunning and highly upgraded “must-see” at a very reasonable price.

Price: $129,500.00

7. 1995 Amel Super Maramu

A newer model of sailboat is the 1995 Amel Super Maramu sailboat. This sailboat has two masts and is very long at 53 feet.

This boat features an aft deck, steps molded right into the hull, well-protected cockpit an many other features. This boat has a large 76 horsepower engine which is more than the average sailboat is equipped with.

Inside, this boat features 2 cabins and 2 heads with showers. There is also plenty of storage, air conditioning , and electric heaters. There is also a nice salon and galley with a refrigerator, dishwasher, chest freezer, microwave oven, 3 burner stove, and other appliances.

This boat is great for multiple days out on the water and is new and updated. Because of the year, this was manufactured and the features, this boat has a larger price tag than the previous models.

Price: $299,990.00

Final Thoughts:

Sailboats are a great way to enjoy a day out at sea. Most sailboat models come with sleeping arrangements and even a kitchen. This makes them ideal for trips that will take more than a day.

Having multiple masts allows you to harness the power of the wind better and can increase your speed and directional capabilities.

There are many great choices when it comes to boats with two masts, but newer models are starting to steer away from double mast designs. This does not mean that you cannot get a good boat with two masts.

Used boats can be great choices when it comes to purchasing a boat. This is even more true with large, yacht boats such as the ones listed above.

Just make sure when you buy a used sailboat you check that everything is intact and in good working order and if it is not, you have allotted space in the budget to fix what is needed.

Your new double-masted sailboat should provide you with plenty of long-lasting memories and adventures out on the water while you connect with the wind and the sea.

Click to share...

Understanding the Two-Masted Sailboat

By Matt Claiborne

Two-Masted Boats with Fore-and-Aft Rigged Sails

A ketch is a two-masted sailboat. The rear mast, called the mizzen mast, is shorter than the forward main mast. The mizzen mast is mounted forward of the rudder post.

A yawl is similar to a ketch, but the rear mizzen mast is moved farther aft, behind the rudder post. This makes the mizzen on a yawl seem like an afterthought, almost like it’s attached to the railing. 

If a two mast boat has masts of equal height or the forward mast is the shorter of the two, it is a schooner. They can have as many masts as the design called for.

Benefits of Two Masted Sailboats

Easy to balance steering forces

More sail plan options for heavy winds

Lower sheet loads mean smaller and less expensive

Lighter loads on smaller sails for easier handling

Shorter overall mast height for bridge clearance

Mizzen can be used as a riding sail at anchor

2 Masted Ship Examples with Square Rigged Sails

A brig is a double mast sailboat with both masts square rigged. In addition, it has fore-and-aft staysails and jibs and a mizzen sail on the aft mast–which is usually gaff-rigged.

A brigantine is a ship with two masts, with the foremast square-rigged and the aft mainmast fore-and-aft rigged.

The Two-Masted Sailboat

Boat maintenance.

What Is A Boat With 2 Masts Called?

Sailboats have held and air of mystique and romance ever since the early explores sailed the globe.

However, the early trade ships were somewhat restricted in their ability to sail into, or against, the wind. As a result, the ships that discovered the new world were slaves to the directions the trade winds were blowing.

Today, thanks to advances in hull design, sail orientation and mast placement, there are numerous sailboat designs that use multiple sail configurations that can travel around the world in any direction at any time of year.

Over the years the types of sailboats have been reduced to a few well-performing designs. These designs are divided into the two main classifications of one-masted boats and those with two or more masts with each mast being capable of supporting one or more sails.

The sloop is the most common type of sailboat and has just one mast, placed roughly at midship, with up to three headsails attached to the mast by guy lines. Boats with 2 masts or more are the ketch, yawl, brigantine, brig and the schooner , with the schooners having two, three, or in rare cases, four masts.

Many sailors like the ketch-rigged design for its off-shore performance, comfort and overall balance. This design has a main and mizzen sail, with the mainsail set in approximately the same position as on a sloop, The mizzen is a smaller mast sail set towards the rear of the boat.

The concept behind the two-sail setup on the ketch-rigged sailboat is that it provides two smaller sails that provide more overall sail area than the single sail design.

In theory the smaller sails are easier to work with in heavy off-shore winds, making the boat much easier to sail in storms. Because of the smaller and easier-to-handle sails, the design is a good choice for long distance short-handed sailing.

The mizzen sail also acts as sort of a “rudder” in helping to keep the boat sailing in the proper direction because of the downward force the mizzen applies to the rear of the boat.

Comfort is another strong selling point of this design. Whereas most sailboats are designed with the cockpit at the stern of the boat, this sailboat has a center cockpit design to allow for the placement of the mizzen sail aft.

Having the cockpit in the middle of the boat allows for more headroom below deck at the rear of the boat and a larger aft cabin. Additionally, unlike an aft cockpit that usually has the rear open to the ocean, a center cockpit is fully enclosed. This offers protection from the elements while at sea and makes for a much nicer sitting area.

The ketch-rigged sailboat is a time-proven rig that has made untold circumnavigations of the globe. For sailors who like the two-mast design, this sailboat is a hard choice to beat.

The yawl is also equipped with a main and a mizzen mast. However, a yawl typically has a smaller mizzen with the mast set aft of the rudder post.

There are as many arguments about whether the yawl is a practical off-shore design as there are species of fish in the ocean. While there are some that site the sail plan of the yawl as more aesthetic than functional, there are many long-time professional sailors who swear by the yawl design.

In theory, at least, the rear mast works as a rudder similarly to the ketch-rigged sailboat. The arguments typically start over the size and placement of the mizzen mast.

Some claim that placing the mizzen further back aids in helping to steer the boat. The other side of the argument is the reduced sail size makes it less efficient.

There is also the point that some sailors feel the mizzen being placed further back aids in heaving, or changing direction, and helps with steadying the boat at anchor.

Still, most sailors familiar with both the ketch and yawl say that the mizzen on the yawl is not a match for that of the ketch-rigged sailboat.

Brigantine and the Brig

Of similar, but not identical design, the brigantine and brig fall into the category of “clipper” or merchant ships.

Both are two-masted boats with the brigantine having square sails on the foremost mast and gaff sails on the mainmast. Here note that the smaller foremast is set forward of mast for the main sail.

Gaff sails are a four-cornered sail design attached to horizontal pole that hangs from the mast. Because of the smaller design, gaffs sails are more easily handled. In contrast, the brig uses square sails on both masts.

Both ships handle both coastal waters and ocean crossings as the square sails are well suited for sailing the trade wind routes.

A schooner is another boat with 2 masts, but can also have more. Like the brig and brigantine, a two-masted schooner has a foremast and an aft mast, the latter essentially being the mainmast.

The main characteristic of the schooner is the masts are almost the same size, with the foremost mast sometimes being slightly shorter. The schooner is equipped with gaff sails on all masts, making it better equipped to handle strong seas.

This makes the schooner very versatile and well suited to crossing the ocean on the trade-wind routes as well as sailing coastal waters with varying wind directions.

Closing Thoughts

Because of the versatile design, many pleasure sailboats during the 19th century were schooner-rigged.

While a square topsail is the most common schooner sail plan, some have sprit rigged topsails that run diagonally across the mast. However, sprit rigging is inefficient in adverse weather as the sails are not easily lowered.

Conversely, sprit rigging excels in coastal waters where the sails can more readily catch the light winds that tend to blow higher up.

While a schooner is easy to sail, can handle various wind and water conditions and is probably the most magnificent sight on the sea under full sail, the draw back of the schooner is it is definitely not the fastest sailboat design.

Types of Sailboats: A Complete Guide

Last Updated by

Daniel Wade

June 15, 2022

Learning the different types of sailboats can help you identify vessels and choose the right boat.

In this article, we'll cover the most common kinds of sailboats, their origins, and what they're used for. We'll also go over the strengths and weaknesses of each design, along with when they're most useful.

The most common kind of sailboat is the sloop, as it's simple to operate and versatile. Other common sailboat types include the schooner, cutter, cat, ketch, schooner, catamaran, and trimaran. Other sailboat variations include pocket cruisers, motorsailers, displacement, and shoal-draft vessels.

The information found in this article is sourced from boat reference guides, including A Field Guide to Sailboats of North America by Richard M. Sherwood and trusted sources in the sailing community.

Table of contents

Distinguishing Types of Sailboats

In this article, we'll distinguish sailboats by traits such as their hull type, rig, and general configuration. Some sailboats share multiple characteristics with other boats but fall into a completely different category. For example, a sailboat with a Bermuda rig, a large engine, and a pilothouse could technically be called a sloop, but it's more likely a motorsailer.

When discerning sailboat type, the first most obvious place to look is the hull. If it has only one hull, you can immediately eliminate the trimaran and the catamaran. If it has two or more hulls, it's certainly not a typical monohull vessel.

The next trait to consider is the rig. You can tell a lot about a sailboat based on its rig, including what it's designed to be used for. For example, a long and slender sailboat with a tall triangular rig is likely designed for speed or racing, whereas a wide vessel with a complex gaff rig is probably built for offshore cruising.

Other factors that determine boat type include hull shape, overall length, cabin size, sail plan, and displacement. Hull material also plays a role, but every major type of sailboat has been built in both wood and fiberglass at some point.

Sailboat vs. Motorsailer

Most sailboats have motors, but most motorized sailboats are not motorsailers. A motorsailer is a specific kind of sailboat designed to run efficiently under sail and power, and sometimes both.

Most sailboats have an auxiliary engine, though these power plants are designed primarily for maneuvering. These vessels cannot achieve reasonable speed or fuel-efficiency. Motorsailers can operate like a powerboat.

Motorsailers provide great flexibility on short runs. They're great family boats, and they're popular in coastal communities with heavy boat traffic. However, these features come at a cost. Motorsailers aren't the fastest or most efficient powerboats, and they're also not the most agile sailboats. That said, they make an excellent general-purpose sailing craft.

Monohull vs. Multi-hull: Which is Better?

Multihull sailboats are increasingly popular, thanks to advances and lightweight materials, and sailboat design. But are they better than traditional sailboats? Monohulls are easier to maintain and less expensive, and they offer better interior layouts. Multihulls are more stable and comfortable, and they're significantly easier to control. Multihull sailboats also have a speed advantage.

Monohull Sailboats

A monohull sailboat is a traditionally-shaped vessel with a single hull. The vast majority of consumer sailboats are monohulls, as they're inexpensive to produce and easy to handle. Monohull sailboats are proven and easy to maintain, though they lack the initial stability and motion comfort of multi-hull vessels.

Monohull sailboats have a much greater rig variety than multi-hull sailboats. The vast majority of multihull sailboats have a single mast, whereas multi-masted vessels such as yawls and schooners are always monohulls. Some multi-hull sailboats have side-by-side masts, but these are the exception.

Catamaran Sailboats

The second most common sailboat configuration is the catamaran. A catamaran is a multihull sailboat that has two symmetrical hulls placed side-by-side and connected with a deck. This basic design has been used for hundreds of years, and it experienced a big resurgence in the fiberglass boat era.

Catamarans are fast, efficient, and comfortable. They don't heel very much, as this design has excellent initial stability. The primary drawback of the catamaran is below decks. The cabin of a catamaran is split between both hulls, which often leaves less space for the galley, head, and living areas.

Trimaran Sailboats

Trimarans are multi-hull sailboats similar to catamarans. Trimarans have three hulls arranged side-by-side. The profile of a trimaran is often indistinguishable from a catamaran.

Trimarans are increasingly popular, as they're faster than catamarans and monohulls and considerably easier to control. Trimarans suffer from the same spatial limitations as catamarans. The addition of an extra hull adds additional space, which is one reason why these multi-hull vessels are some of the best-selling sailboats on the market today.

Sailboat Rig Types

Rigging is another way to distinguish sailboat types. The rig of a sailboat refers to it's mast and sail configuration. Here are the most common types of sailboat rigs and what they're used for.

Sloops are the most common type of sailboat on the water today. A sloop is a simple single-mast rig that usually incorporates a tall triangular mainsail and headsail. The sloop rig is easy to control, fun to sail, and versatile. Sloops are common on racing sailboats as they can sail quite close to the wind. These maneuverable sailboats also have excellent windward performance.

The sloop rig is popular because it works well in almost any situation. That said, other more complex rigs offer finer control and superior performance for some hull types. Additionally, sloops spread their entire sail area over just to canvases, which is less flexible than multi-masted rigs. The sloop is ideal for general-purpose sailing, and it's proven itself inland and offshore.

Sloop Features:

• Most popular sailboat rig
• Single mast
• One mainsail and headsail
• Typically Bermuda-rigged
• Easy to handle
• Great windward performance
• Less precise control
• Easier to capsize
• Requires a tall mast

Suitable Uses:

• Offshore cruising
• Coastal cruising

Cat (Catboat)

The cat (or catboat) is a single-masted sailboat with a large, single mainsail. Catboats have a thick forward mast, no headsail, and an exceptionally long boom. These vessels are typically gaff-rigged, as this four-edged rig offers greater sail area with a shorter mast. Catboats were popular workboats in New England around the turn of the century, and they have a large following today.

Catboats are typically short and wide, which provides excellent stability in rough coastal conditions. They're hardy and seaworthy vessels, but they're slow and not ideal for offshore use. Catboats are simple and easy to control, as they only have a single gaff sail. Catboats are easy to spot thanks to their forward-mounted mast and enormous mainsail.

Catboat Features:

• Far forward-mounted single mast
• Large four-sided gaff sail
• Short and wide with a large cockpit
• Usually between 20 and 30 feet in length
• Excellent workboats
• Tough and useful design
• Great for fishing
• Large cockpit and cabin
• Not ideal for offshore sailing
• Single sail offers less precise control
• Slow compared to other rigs
• Inland cruising

At first glance, a cutter is difficult to distinguish from a sloop. Both vessels have a single mast located in roughly the same position, but the sail plan is dramatically different. The cutter uses two headsails and often incorporates a large spar that extends from the bow (called a bowsprit).

The additional headsail is called a staysail. A sloop only carries one headsail, which is typically a jib. Cutter headsails have a lower center of gravity which provides superior performance in rough weather. It's more difficult to capsize a cutter, and they offer more precise control than a sloop. Cutters have more complex rigging, which is a disadvantage for some people.

Cutter Features:

• Two headsails
• Long bowsprit
• Similar to sloop
• Gaff or Bermuda-rigged
• Fast and efficient
• Offers precise control
• Superior rough-weather performance
• More complex than the sloop rig
• Harder to handle than simpler rigs

Perhaps the most majestic type of sailboat rig, the schooner is a multi-masted vessel with plenty of history and rugged seaworthiness. The schooner is typically gaff-rigged with short masts and multiple sails. Schooners are fast and powerful vessels with a complex rig. These sailboats have excellent offshore handling characteristics.

Schooners have a minimum of two masts, but some have three or more. The aftermost large sail is the mainsail, and the nearly identical forward sail is called the foresail. Schooners can have one or more headsail, which includes a cutter-style staysail. Some schooners have an additional smaller sale aft of the mainsail called the mizzen.

Schooner Features:

• At least two masts
• Usually gaff-rigged
• One or more headsails
• Excellent offshore handling
• Precise control
• Numerous sail options (headsails, topsails, mizzen)
• Fast and powerful
• Complex and labor-intensive rig
• Difficult to adjust rig single-handed
• Offshore fishing

Picture a ketch as a sloop or a cutter with an extra mast behind the mainsail. These vessels are seaworthy, powerful, excellent for offshore cruising. A ketch is similar to a yawl, except its larger mizzen doesn't hang off the stern. The ketch is either gaff or Bermuda-rigged.

Ketch-rigged sailboats have smaller sails, and thus, shorter masts. This makes them more durable and controllable in rough weather. The mizzen can help the boat steer itself, which is advantageous on offshore voyages. A ketch is likely slower than a sloop or a cutter, which means you aren't likely to find one winning a race.

Ketch Features:

• Headsail (or headsails), mainsail, and mizzen
• Mizzen doesn't extend past the rudder post
• Good offshore handling
• Controllable and mild
• Shorter and stronger masts
• Easy self-steering
• Slower than sloops and cutters
• Less common on the used market

A dinghy is a general term for a small sailboat of fewer than 28 feet overall. Dinghys are often dual-power boats, which means they usually have oars or a small outboard in addition to a sail. These small boats are open-top and only suitable for cruising in protected waters. Many larger sailboats have a deployable dinghy on board to get to shore when at anchor.

Dinghy Features:

• One or two people maximum capacity
• Easy to sail
• Works with oars, sails, or an outboard
• Great auxiliary boat
• Small and exposed
• Not suitable for offshore use
• Going from anchor to shore
• Protected recreational sailing (lakes, rivers, and harbors)

Best Sailboat Type for Stability

Stability is a factor that varies widely between sailboat types. There are different types of stability, and some sailors prefer one over another. For initial stability, the trimaran wins with little contest. This is because these vessels have a very high beam-to-length ratio, which makes them much less prone to rolling. Next up is the catamaran, which enjoys the same benefit from a wide beam but lacks the additional support of a center hull section.

It's clear that in most conditions, multihull vessels have the greatest stability. But what about in rough weather? And what about capsizing? Multihull sailboats are impossible to right after a knockdown. This is where full-keel monohull sailboats excel.

Traditional vessels with deep displacement keels are the safest and most stable in rough weather. The shape, depth, and weight of their keels keep them from knocking over and rolling excessively. In many cases, these sailboats will suffer a dismasting long before a knockdown. The primary disadvantage of deep-keeled sailboats is their tendency to heel excessively. This characteristic isn't hazardous, though it can make novice sailors nervous and reduce cabin comfort while underway.

Best Sailboat Type for Offshore Cruising

The best sailboat type for offshore cruising is the schooner. These graceful aid robust vessels have proven themselves over centuries as durable and capable vessels. They typically use deep displacement keels, which makes them stable in rough weather and easy to keep on course.

That said, the full answer isn't quite so simple. Modern multihull designs are an attractive option, and they have also proven to be strong and safe designs. Multihull sailboats are an increasingly popular option for offshore sailors, and they offer comfort that was previously unknown in the sailing community.

Many sailors cross oceans in basic Bermuda-rigged monohulls and take full advantage of a fin-keel design speed. At the end of the day, the best offshore cruising sailboat is whatever you are comfortable handling and living aboard. There are physical limits to all sailboat designs, though almost any vessel can make it across an ocean if piloted by a competent skipper and crew.

Best Sailboat Type for Racing The modern lightweight Bermuda-rigged sailboat is the king of the regatta. When designed with the right kind of hull, these vessels are some of the fastest sailboats ever developed. Many boats constructed between the 1970s and today incorporate these design features due to their favorable coastal and inland handling characteristics. Even small sailboats, such as the Cal 20 and the Catalina 22, benefit from this design. These boats are renowned for their speed and handling characteristics.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Pontoon Boats
• Privacy Policy

What Is a Sailboat With 2 Masts Called?

Boatgroot is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Sailboats have been around for thousands of years and have come in all shapes and sizes. They have played a critical role in exploration, commerce, and recreation. One particular type of sailboat that often catches people’s eyes is a two-masted sailboat, but what is it called?

Sailors and sailing enthusiasts alike often use specific terminology when it comes to different types of sailboats. Knowing the proper terms can help you better understand the different types of sailboats and their characteristics.

In this article, we will explore the particulars of sailboats with two masts and discover what they are called.

Sailing is a popular pastime and sport that has been enjoyed for centuries. Sailboats come in many different shapes and sizes, and one of the most popular types of sailboats is the one with two masts. But what are these sailboats called?

Let’s take a closer look.

A yawl is a type of sailing boat that features two masts. The mizzen mast, which is the shorter mast of the two, is located towards the back of the boat. The main mast, which is the taller of the two, is located towards the front of the boat.

One of the defining characteristics of a yawl is the positioning of the mizzen mast. Unlike a ketch or a schooner, which also feature two masts, a yawl’s mizzen mast is positioned aft of the steering mechanism, usually in the back of the cockpit. This specific design allows for greater flexibility while sailing, making a yawl a versatile boat choice for sailors of all levels.

Historically, yawls were used primarily as fishing boats and were designed with shallow drafts, making them well-suited for coastal waters. However, nowadays, they are frequently used for cruising, racing, and even as liveaboard options.

Modern Yawls are also made of various materials ranging from traditional wood to fiberglass or other composites. They are also available in a range of sizes, depending on their intended use. Some of the larger yawls may even include additional features like a cabin, a galley, and sleeping quarters.

A ketch is a type of sailing boat that features two masts, with the aft mast – also called the mizzenmast – situated behind the mainmast. This unique configuration allows for a variety of sail plans, including the use of small sails on the mizzenmast to provide additional balance and control in certain sailing situations.

This design is popular among sailors who value versatility and safety, as ketches are well-suited for a range of conditions and can be operated with smaller crews.

The sail plan of a ketch typically includes a mainsail, a headsail located forward of the mast, and a mizzenmast with at least one additional sail.

The smaller sail on the mizzenmast, known as a mizzen staysail, can be used to help balance the boat in high winds, while the larger sail on the mainmast provides the primary propulsion. This sail arrangement allows for more precise control of the boat’s direction, especially in rough or windy conditions.

There are several advantages to sailing a ketch. First, the use of multiple sails and the distinctive mast configuration provide increased stability, which makes ketches popular among solo sailors or those with smaller crews.

Second, the flexibility of the sail plan allows for a greater range of sailing conditions, from light winds to rough seas. Finally, many sailors appreciate the aesthetic appeal of the ketch design, which is both functional and striking.

A schooner is a type of sailing vessel that typically has two or more masts. The masts on a schooner are usually the same height, or if there is a difference, the forward mast is taller. This configuration is known as a fore-and-aft rig, where the sails are positioned parallel to the length of the vessel, rather than perpendicular or diagonal.

Schooners were widely used in the 18th and 19th centuries for fishing, trading, and naval warfare. They were particularly popular in North America, where they were used to transport goods along coastal and inland waterways. Many famous American ships of the early 19th century, such as the USS Constitution and the USS Niagara, were schooners.

The size of a schooner can vary greatly, ranging from small pleasure craft to large commercial vessels. They are typically made of wood, although some modern schooners are now constructed from other materials such as fiberglass or steel.

One defining characteristic of a schooner is its versatility. The vessel is capable of sailing in various wind conditions and can be navigated with a relatively small crew. This made the schooner an ideal vessel for trade and exploration.

In terms of its design, the schooner has a long, narrow hull, which makes it fast and maneuverable. The sails are typically triangular in shape and overlap slightly, providing greater control over the vessel’s speed and direction.

Today, schooners are mainly used for pleasure cruising or as a type of sailboat racing. They are popular among sailing enthusiasts who appreciate their classic design and unique sailing characteristics.

A brigantine is a two-masted sailing vessel that is typically used for both commercial and recreational purposes. It is considered to be a type of brig, which is a sailing ship that has two square-rigged masts. However, a brigantine differs from a traditional brig in that it has a fore-and-aft rig on its mainmast instead of a square rig.

The fore-and-aft rig on the mainmast of a brigantine allows for greater maneuverability and control, especially when sailing close to the wind. This makes it a popular choice for coastal and inland waters, where the winds can be unpredictable and variable.

Brigantines were commonly used as cargo ships during the Age of Exploration, as they were able to carry large amounts of cargo while still being relatively fast and agile. They were also used as naval vessels, particularly during the 18th and 19th centuries, due to their speed and ease of handling.

In modern times, brigantines are often used for educational and recreational purposes. Many organizations and schools operate brigantines as part of their maritime education programs, allowing students to learn about sailing, navigation, and maritime history while aboard a traditional sailing vessel.

Brigantines can vary in size, with some smaller vessels being used for day trips and pleasure sailing, while larger vessels can be used for longer voyages and expeditions. They typically have a crew of anywhere from 5-20 people, depending on the size of the vessel and the nature of the voyage.

What Is A Hermaphrodite Brig?

A hermaphrodite brig, also known as a half-brig, is a type of sailing vessel that was popular during the 18th and 19th centuries. It was a hybrid of two different types of vessels, the brig and the schooner.

The hermaphrodite brig had two masts, with the foremast being the taller of the two. It also had square-rigged sails on the foremast and fore-and-aft sails on the mainmast. This combination of sails allowed the vessel to sail efficiently in both light and heavy winds.

The term “hermaphrodite” comes from the fact that the vessel had characteristics of both a square-rigged brig and a fore-and-aft rigged schooner. It was a versatile vessel that was able to navigate through different weather conditions and sail efficiently in both open seas and narrow channels.

The hermaphrodite brig was widely used for coastal trading and fishing, as well as for naval purposes. Its versatility made it a popular choice for naval fleets, as it was able to carry a large amount of cargo and supplies while still maintaining its speed and maneuverability.

One of the most significant uses of the hermaphrodite brig was during the Napoleonic Wars in the early 19th century. The British Navy used these vessels extensively for blockade duty, as they were able to patrol shallow waters and navigate through narrow channels with ease.

Despite its popularity during the 18th and 19th centuries, the hermaphrodite brig eventually fell out of use as newer, more efficient vessels were developed. However, its legacy lives on in maritime history, as it played an important role in the development of sailing vessels and naval warfare.

What Is A Sailboat With 3 Masts Called?

A sailboat with three masts is called a schooner. The schooner is a type of sailing vessel that has been used for centuries for both commercial and recreational purposes. The most common type of schooner has two masts, but there are also schooners with three or even four masts.

Schooners are still popular today, both for racing and leisure sailing. Many modern schooners are designed for luxury cruising, featuring spacious cabins and amenities like air conditioning and Wi-Fi.

LEAVE A REPLY Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How Much Does Carefree Boat Club Cost?

What Is One Part of a Regular Vessel and Engine Maintenance...

Best 5 Jon Boat Seats – Swivel, Leaning, Deck Seat, and...

How Much Do Yacht Brokers Make?

Who Owns My Druthers Boat in Outer Banks

• Terms & Conditions
• Cookie Policy

• Find A School
• Certifications
• North U Sail Trim
• Inside Sailing with Peter Isler
• Docking Made Easy
• Study Quizzes
• Bite-sized Lessons
• Fun Quizzes
• Sailing Challenge

What Type of Sailboat is This?

By: Zeke Quezada, ASA Equipment , Sailboats

While sailing in the Sir Francis Drake Channel in the British Virgin Islands I noticed a peculiar catamaran heading in our direction. A two-masted catamaran. Have you seen a boat like this? Does it have a name?

How often do you see a sailboat and realize that it has a different sail plan or configuration and most likely has a different name?  

This guide to sailboats should help you identify the types of sailboats you might encounter while on your cruising adventures.

You’ll be able to find even more info on these different type of sailboats in our series “What’s in a Rig.”  

What type of a boat is this…?

A sloop rig is a boat with a single mast and a fore and aft sail configuration. Sloops date back to the early 17th century but didn’t really become popular until the 20th century. The likely reason for their popularity is their ability to efficiently head upwind and how relatively simple they are to control – great for short-handing.

Cutter Rig:

A variation on the Sloop is the Cutter Rig. Although it has gone through some changes through the course of history, the modern cutter rig is generally a set-up with two headsails. The forward sail is called the Yankee, and the one slightly behind it is the staysail.

There are many who feel that this very old but very innovative sail plan is superior to the more popular and ubiquitous sloop rig and others. The junk is predicated upon fully battened sails, a characteristic associated with more modern racing vessels, and they typically lack any standing rigging (stays and shrouds). Due to the full batten set-up, the sails maintain an efficient, consistent shape and are fast, especially downwind. In a big breeze, junk owners will attest that they’re extremely easy to reef and, as an added bonus, are inherently self-tacking.

They are two masted rigs with a main mast and a (smaller) mizzenmast that is set in front of the rudder post – they carry a jib just like a sloop. Generally, ketches will be in the 40-plus foot range. The reasoning for this is that before sailing hardware was as advanced as it is now, designers were looking for ways to carry a good amount of sail but make it manageable at the same time. This configuration served that purpose and, while doing so, also gave sailors quite a few options for various weather conditions and situations.

Like, the ketch, a yawl is equipped with two masts, a main and a mizzen, but ordinarily, on a yawl, the mast is smaller and set behind the rudder post. While some yawl sailors contest the small sail configuration that hangs over the stern as an aid to heaving to and steadying life at a mooring, most concede the mizzen on a yawl is not what it is on a ketch. Typically, it doesn’t provide any horsepower to speak of or ease-of-handling benefits in splitting the rig like a ketch or schooner might.

A gaff rig employs a spar on the top of the sail, and typically other sails can be set in conjunction with that mainsail with the gaff. Often, on the smaller, non-tall ship, gaff rigs, there will be a small triangular sail that fits between the main and the mast like a puzzle piece – this is the topsail.

A cat rig is a single mast situated well forward, near the bow, which carries a large single sail and has no standing rigging, sometimes referred to as “unstayed.” An Optimist, Laser or Sabot are common (smaller) examples of a cat rig, but many bigger boats utilize the set-up.

A schooner is a sailboat with at least two masts, with the forward mast (foremast) being a bit shorter than the main mast. Although a schooner can have more than two masts, most were just two. During the time of their popularity, this smaller and better upwind setup allowed for a more efficient and manageable sailboat. It was the preferred choice of pirates, privateers, slaveship captains and others.

So what type of boat is this? Let us know. Find us on Social media and share your thoughts @AmericanSailing

Related Posts:

• Learn To Sail
• Mobile Apps
• Online Courses
• Upcoming Courses
• Sailor Resources
• ASA Log Book
• Bite Sized Lessons
• Knots Made Easy
• Catamaran Challenge
• Sailing Vacations
• Sailing Cruises
• Charter Resources
• International Proficiency Certificate
• Find A Charter
• All Articles
• Sailing Tips
• Sailing Terms
• Destinations
• Environmental
• Initiatives
• Instructor Resources
• Become An Instructor
• Become An ASA School
• Member / Instructor Login
• Affiliate Login

The Yacht Owner

Choose Smart for Happy Sailing!

Schooner – A Two Masted Sailing Vessel of Dutch Origins

October 8, 2017 By Daniel Mihai Popescu Leave a Comment

The schooner is a type of sailing vessel having a foremast and mainmast, with or without other masts, and having fore-and-aft sails on all lower masts. While the schooner was originally gaff-rigged, modern schooners typically carry a Bermuda rig.

A typical schooner

The Bermuda rig consists of a triangular sail set aft of the mast with its head raised to the top of the mast; its luff runs down the mast and is normally attached to it for its entire length; its tack is attached at the base of the mast; its foot (in modern versions of the rig) controlled by a boom; and its clew attached to the aft end of the boom, which is controlled by its sheet.

Necessary Nautical Terms

The top of all sails is called the head , the leading edge is called the luff , the trailing edge is the leech , and the bottom edge is the foot . The corner where the leech and the foot connect is called the clew . The corner on a fore-and-aft sail where the luff and foot connect is called the tack .

Schooner – Short History

Schooners first evolved in the late 17th century from a variety of small two-masted gaff-rigged vessels used in the coast and estuaries of the Netherlands. They were further developed in North America from the early 18th century, and came into extensive use in New England. The most common type, with two masts, were popular in trades requiring speed and windward ability, such as slaving, privateering, blockade running, and offshore fishing.

More descriptive stuff from Wikipedia

Sailing vessels with a single mast will typically be sloops or cutters, either with a Bermuda or gaff mainsail. There is little economic justification for the cost and complexity of a second mast unless the vessel is reasonably large, say above 50 feet (15 m) LOA.

The Atlantic, a famous boat of this kind

If a vessel’s size requires a second mast, the sail plan will usually be a schooner, ketch or yawl, all of which are fore-and-aft rigged, although the “topsail schooner” variant carries one or more square topsails on its foremast. The two-topsail schooner variant carries square topsails on both the mainmast and the foremast. The schooner may be distinguished from both the yawl and the ketch by the disposition of its masts, and thus the placement of the mainsail. On the yawl and ketch, the mainsail is flown from the forward mast, or mainmast, and the aft mast is the mizzen-mast. A two-masted schooner has the mainsail on the aft mast, and its other mast is the foremast. Compared to a single-masted vessel, all the two-masted vessels can have a lower center of pressure in the sail plan.

Although the ketch and, to a much lesser extent, the yawl are more popular than the schooner in Europe, the schooner is arguably more efficient. The schooner can carry a larger sail area, because of its much larger mainsail and the effective sail(s) between the masts. Also, in a schooner, all the sails work together in a complementary fashion, optimizing airflow and drive. By contrast, on a ketch, or especially a yawl, the mizzen sail provides proportionately less power, being smaller than, and frequently blanketed by, the mainsail. The ketch however offers advantages in sail handling in poor weather.

I’m sorry I had to use a lot of info from Wikipedia, but this time it was properly explained, so I agreed with it.

If you like what you read, please subscribe to this blog by completing the form . If you want to help more, start by following us on Twitter , and like our page on Facebook . You don’t know what good things may happen. To lighten your day, check our pins on Pinterest , we can be friends there too. Oh, and if you need a really good looking blog attached to your site, or just for fun, to express your feelings more competitively, read this Own Your Website offer! Thank you very much.

Copyright © 2017 The Yacht Owner – Schooner – A Two Masted Sailing Vessel of Dutch Origins

If you liked this article, tell someone about it

Follow Us on Twitter!

About Daniel Mihai Popescu

Daniel Mihai Popescu is a ship engineer with background in sea transportation, real estate, yacht brokerage, construction, entrepreneurship. Avid reader, traveled the world, explorer of the human nature. Never stopped learning, now I create and manage Wordpress based sites . • Twitter • Facebook • LinkedIn • Instagram • Pinterest • Goodreads • Medium •

  Comment Policy : Be polite even if you disagree, and be nice and helpful if you can. Please use only your real name and don't post unrelated links in your comment. Keywords instead of your real name will be modified or the whole comment will be deleted as spam! As much as we want to help, only comments related to the subject are really appreciated. Using a non-existent e-mail address will lead to deleting the comment as well.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Guide to Understanding Sail Rig Types (with Pictures)

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

What are the different types of sail rig? The sail rig is determined by the number of masts and the layout and shape of sails. Most modern ships are fore-and-aft rigged, while old ships are square-rigged. Rigs with one mast are sloops and cutters. Ketches, yawls, brigs, and schooners have two masts. Barques have three masts. Rigs can contain up to seven masts.

'Yeah, that's a gaff brig, and that a Bermuda cutter' - If you don't know what this means (neither did I) and want to know what to call a two-masted ship with a square-rigged mainsail, this article is definitely for you.

On this page:

More info on sail rig types, mast configurations and rig types, rigs with one mast, rigs with two masts, rigs with three masts, related questions.

This article is part 2 of my series on sails and rig types. Part 1 is all about the different types of sails. If you want to know everything there is to know about sails once and for all, I really recommend you read it. It gives a good overview of sail types and is easy to understand.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

First of all, what is a sail rig? A sail rig is the way in which the sails are attached to the mast(s). In other words, it's the setup or configuration of the sailboat. The rig consists of the sail and mast hardware. The sail rig and sail type are both part of the sail plan. We usually use the sail rig type to refer to the type of boat.

Let's start by taking a look at the most commonly used modern sail rigs. Don't worry if you don't exactly understand what's going on. At the end of this article, you'll understand everything about rig types.

The sail rig and sail plan are often used interchangeably. When we talk of the sail rig we usually mean the sail plan . Although they are not quite the same. A sail plan is the set of drawings by the naval architect that shows the different combinations of sails and how they are set up for different weather conditions. For example a light air sail plan, storm sail plan, and the working sail plan (which is used most of the time).

So let's take a look at the three things that make up the sail plan.

The 3 things that make up the sail plan

I want to do a quick recap of my previous article. A sail plan is made up of:

• Mast configuration - refers to the number of masts and where they are placed
• Sail type - refers to the sail shape and functionality
• Rig type - refers to the way these sails are set up on your boat

I'll explore the most common rig types in detail later in this post. I've also added pictures to learn to recognize them more easily. ( Click here to skip to the section with pictures ).

How to recognize the sail plan?

So how do you know what kind of boat you're dealing with? If you want to determine what the rig type of a boat is, you need to look at these three things:

• Check the number of masts, and how they are set up.
• You look at the type of sails used (the shape of the sails, how many there are, and what functionality they have).
• And you have to determine the rig type, which means the way the sails are set up.

Below I'll explain each of these factors in more detail.

The most common rig types on sailboats

To give you an idea of the most-used sail rigs, I'll quickly summarize some sail plans below and mention the three things that make up their sail plan.

• Bermuda sloop - one mast, one mainsail, one headsail, fore-and-aft rigged
• Gaff cutter - one mast, one mainsail, two staysails, fore-and-aft rigged
• Gaff schooner - two-masted (foremast), two mainsails, staysails, fore-and-aft rigged
• Gaff ketch - two-masted (mizzen), two mainsails, staysails, fore-and-aft rigged
• Full-rigged ship or tall ship - three or more masts, mainsail on each mast, staysails, square-rigged

The first word is the shape and rigging of the mainsail. So this is the way the sail is attached to the mast. I'll go into this later on. The second word refers to the mast setup and amount of sails used.

Most sailboats are Bermuda sloops. Gaff-rigged sails are mostly found on older, classic boats. Square-rigged sails are generally not used anymore.

But first I want to discuss the three factors that make up the sail plan in more detail.

Ways to rig sails

There are basically two ways to rig sails:

• From side to side, called Square-rigged sails - the classic pirate sails
• From front to back, called Fore-and-aft rigged sails - the modern sail rig

Almost all boats are fore-and-aft rigged nowadays.

Square sails are good for running downwind, but they're pretty useless when you're on an upwind tack. These sails were used on Viking longships, for example. Their boats were quicker downwind than the boats with fore-and-aft rigged sails, but they didn't handle as well.

The Arabs first used fore-and-aft rigged sails, making them quicker in difficult wind conditions.

Quick recap from part 1: the reason most boats are fore-and-aft rigged today is the increased maneuverability of this configuration. A square-rigged ship is only good for downwind runs, but a fore-and-aft rigged ship can sail close to the wind, using the lift to move forward.

The way the sails are attached to the mast determines the shape of the sail. The square-rigged sails are always attached the same way to the mast. The fore-and-aft rig, however, has a lot of variations.

The three main sail rigs are:

• Bermuda rig - most used - has a three-sided (triangular) mainsail
• Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
• Lateen rig - has a three-sided (triangular) mainsail on a long yard

The Bermuda is the most used, the gaff is a bit old-fashioned, and the lateen rig is outdated (about a thousand years). Lateen rigs were used by the Moors. The Bermuda rig is actually based on the Lateen rig (the Dutch got inspired by the Moors).

Other rig types that are not very common anymore are:

• Junk rig - has horizontal battens to control the sail
• Settee rig - Lateen with the front corner cut off
• Crabclaw rig

Mast configuration

Okay, we know the shape of the mainsail. Now it's time to take a look at the mast configuration. The first thing is the number of masts:

• one-masted boats
• two-masted boats
• three-masted boats
• four masts or up
• full or ship-rigged boats - also called 'ships' or 'tall ships'

I've briefly mentioned the one and two mast configurations in part 1 of this article. In this part, I'll also go over the three-masted configurations, and the tall ships as well.

A boat with one mast has a straightforward configuration because there's just one mast. You can choose to carry more sails or less, but that's about it.

A boat with two masts or more gets interesting. When you add a mast, it means you have to decide where to put the extra mast: in front, or in back of the mainmast. You can also choose whether or not the extra mast will carry an extra mainsail. The placement and size of the extra mast are important in determining what kind of boat we're dealing with. So you start by locating the largest mast, which is always the mainmast.

From front to back: the first mast is called the foremast. The middle mast is called the mainmast. And the rear mast is called the mizzenmast.

What is the mizzenmast? The mizzenmast is the aft-most (rear) mast on a sailboat with three or more masts or the mast behind the mainmast on a boat with two masts. The mizzenmast carries the mizzen sail. On a two-masted boat, the mizzenmast is always (slightly) smaller than the mainmast. What is the purpose of the mizzen sail? The mizzen sail provides more sail area and flexibility in sail plan. It can be used as a big wind rudder, helping the sailor to have more control over the stern of the ship. It pushes the stern away from the wind and forces the bow in the opposite way. This may help to bring the bow into the wind when at anchor.

I always look at the number of masts first, because this is the easiest to spot. So to make this stuff more easy to understand, I've divided up the rig types based on the number of masts below.

Why would you want more masts and sail anyways?

Good question. The biggest advantage of two masts compared to one (let's say a ketch compared to a sloop), is that it allows you to use multiple smaller sails to get the same sail area. It also allows for shorter masts.

This means you reduce the stress on the rigging and the masts, which makes the ketch rig safer and less prone to wear and tear. It also doesn't capsize as quickly. So there are a couple of real advantages of a ketch rig over a sloop rig.

In the case of one mast, we look at the number of sails it carries.

Boats with one mast can have either one sail, two sails, or three or more sails.

Most single-masted boats are sloops, which means one mast with two sails (mainsail + headsail). The extra sail increases maneuverability. The mainsail gives you control over the stern, while the headsail gives you control over the bow.

Sailor tip: you steer a boat using its sails, not using its rudder.

The one-masted rigs are:

• Cat - one mast, one sail
• Sloop - one mast, two sails
• Cutter - one mast, three or more sails

The cat is the simplest sail plan and has one mast with one sail. It's easy to handle alone, so it's very popular as a fishing boat. Most (very) small sailboats are catboats, like the Sunfish, and many Laser varieties. But it has a limited sail area and doesn't give you the control and options you have with more sails.

The most common sail plan is the sloop. It has one mast and two sails: the main and headsail. Most sloops have a Bermuda mainsail. It's one of the best racing rigs because it's able to sail very close to the wind (also called 'weatherly'). It's one of the fastest rig types for upwind sailing.

It's a simple sail plan that allows for high performance, and you can sail it short-handed. That's why most sailboats you see today are (Bermuda) sloops.

This rig is also called the Marconi rig, and it was developed by a Dutch Bermudian (or a Bermudian Dutchman) - someone from Holland who lived on Bermuda.

A cutter has three or more sails. Usually, the sail plan looks a lot like the sloop, but it has three headsails instead of one. Naval cutters can carry up to 6 sails.

Cutters have larger sail area, so they are better in light air. The partition of the sail area into more smaller sails give you more control in heavier winds as well. Cutters are considered better for bluewater sailing than sloops (although sloops will do fine also). But the additional sails just give you a bit more to play with.

Two-masted boats can have an extra mast in front or behind the mainmast. If the extra mast is behind (aft of) the mainmast, it's called a mizzenmast . If it's in front of the mainmast, it's called a foremast .

If you look at a boat with two masts and it has a foremast, it's most likely either a schooner or a brig. It's easy to recognize a foremast: the foremast is smaller than the aft mast.

If the aft mast is smaller than the front mast, it is a sail plan with a mizzenmast. That means the extra mast has been placed at the back of the boat. In this case, the front mast isn't the foremast, but the mainmast. Boats with two masts that have a mizzenmast are most likely a yawl or ketch.

The two-masted rigs are:

• Lugger - two masts (mizzen), with lugsail (a cross between gaff rig and lateen rig) on both masts
• Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast is much taller than mizzen. Mizzen without a mainsail.
• Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
• Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
• Bilander - two masts (foremast). Has a lateen-rigged mainsail and square-rigged sails on the foremast and topsails.
• Brig - two masts (foremast), partially square-rigged. The main mast carries small lateen-rigged sail.

The yawl has two masts that are fore-and-aft rigged and a mizzenmast. The mizzenmast is much shorter than the mainmast, and it doesn't carry a mainsail. The mizzenmast is located aft of the rudder and is mainly used to increase helm balance.

A ketch has two masts that are fore-and-aft rigged. The extra mast is a mizzenmast. It's nearly as tall as the mainmast and carries a mainsail. Usually, the mainsails of the ketch are gaff-rigged, but there are Bermuda-rigged ketches too. The mizzenmast is located in front of the rudder instead of aft, as on the yawl.

The function of the ketch's mizzen sail is different from that of the yawl. It's actually used to drive the boat forward, and the mizzen sail, together with the headsail, are sufficient to sail the ketch. The mizzen sail on a yawl can't really drive the boat forward.

Schooners have two masts that are fore-and-aft rigged. The extra mast is a foremast which is generally smaller than the mainmast, but it does carry a mainsail. Schooners are also built with a lot more masts, up to seven (not anymore). The schooner's mainsails are generally gaff-rigged.

The schooner is easy to sail but not very fast. It handles easier than a sloop, except for upwind, and it's only because of better technology that sloops are now more popular than the schooner.

The brig has two masts. The foremast is always square-rigged. The mainmast can be square-rigged or is partially square-rigged. Some brigs carry a lateen mainsail on the mainmast, with square-rigged topsails.

Some variations on the brig are:

Brigantine - two masts (foremast), partially square-rigged. Mainmast carries no square-rigged mainsail.

Hermaphrodite brig - also called half brig or schooner brig. Has two masts (foremast), partially square-rigged. Mainmast carries a gaff rig mainsail and topsail, making it half schooner.

Three-masted boats are mostly barques or schooners. Sometimes sail plans with two masts are used with more masts.

The three-masted rigs are:

• Barque - three masts, fore, and mainmast are square-rigged, the mizzenmast is usually gaff-rigged. All masts carry mainsail.
• Barquentine - three masts, foremast is square-rigged, the main and mizzenmast are fore-and-aft rigged. Also called the schooner barque.
• Polacca - three masts, foremast is square-rigged, the main and mizzenmast are lateen-rigged.
• Xebec - three masts, all masts are lateen-rigged.

A barque has three or four masts. The fore and mainmast are square-rigged, and the mizzen fore-and-aft, usually gaff-rigged. Carries a mainsail on each mast, but the mainsail shape differs per mast (square or gaff). Barques were built with up to five masts. Four-masted barques were quite common.

Barques were a good alternative to full-rigged ships because they require a lot fewer sailors. But they were also slower. Very popular rig for ocean crossings, so a great rig for merchants who travel long distances and don't want 30 - 50 sailors to run their ship.

Barquentine

The barquentine usually has three masts. The foremast is square-rigged and the main and mizzenmast fore-and-aft. The rear masts are usually gaff-rigged.

Faster than a barque or a schooner, but the performance is worse than both.

The polacca or polacre rig has three masts with a square-rigged foremast. The main and mizzenmast are lateen-rigged. Beautiful boat to see. Polacca literally means 'Polish' (it's Italian). It was a popular rig type in the Mediterranean in the 17th century. It looks like the xebec, which has three lateen-rigged masts.

Fun fact: polaccas were used by a Dutch sailor-turned-Turkish-pirate (called Murat Reis).

The xebec is a Mediterranean trading ship with three masts. All masts are lateen-rigged. I couldn't find any surviving xebecs, only models and paintings. So I guess this rig is outdated a long time.

A boat with three or more masts that all carry square-rigged sails is called a ship, a tall ship, or a full-rigged ship. So it's at this point that we start calling boats 'ships'. It has nothing to do with size but with the type of rigging.

More sails mean less stress on all of them. These ships use a lot of sails to distribute the forces, which reduces the stress on the rigging and the masts. Square sails mean double the sail area in comparison to triangular sails.

They are quite fast for their size, and they could outrun most sloops and schooners (schooners were relatively a lot heavier). The reason is that tall ships could be a lot longer than sloops, giving them a lot of extra hull speed. Sloops couldn't be as large because there weren't strong enough materials available. Try making a single triangular sail with a sail area of over 500 sq. ft. from linen.

So a lot of smaller sails made sense. You could have a large ship with a good maximum hull speed, without your sails ripping apart with every gust of wind.

But you need A LOT of sailors to sail a tall ship: about 30 sailors in total to ie. reef down sails and operate the ship. That's really a lot.

Tall ships are used nowadays for racing, with the popular tall ship races traveling the world. Every four years I go and check them out when they are at Harlingen (which is very close to where I live).

Check out the amazing ships in this video of the tall ship races last year near my hometown. (The event was organized by friends of mine).

What is the difference between a schooner and a sloop? A schooner has two masts, whereas the sloop only has one. The schooner carries more sails, with a mainsail on both masts. Also, sloops are usually Bermuda-rigged, whereas schooners are usually gaff-rigged. Most schooners also carry one or two additional headsails, in contrast to the single jib of the sloop.

What do you call a two-masted sailboat? A two-masted sailboat is most likely a yawl, ketch, schooner, or brig. To determine which one it is you have to locate the mainmast (the tallest). At the rear: schooner or brig. In front: yawl or ketch. Brigs have a square-rigged foremast, schooners don't. Ketches carry a mainsail on the rear mast; yawls don't.

What is a sloop rig? A sloop rig is a sailboat with one mast and two sails: a mainsail and headsail. It's a simple sail plan that handles well and offers good upwind performance. The sloop rig can be sailed shorthanded and is able to sail very close to the wind, making it very popular. Most recreational sailboats use a sloop rig.

What is the difference between a ketch and a yawl? The most important difference between a ketch and a yawl are the position and height of the mizzenmast. The mizzenmast on a yawl is located aft of the rudder, is shorter than the mainmast and doesn't carry a mainsail. On a ketch, it's nearly as long as the mainmast and carries a mainsail.

There are a wonderful lots of DIY changeability shows on the cable airwaves these days.

Rick the rigger

There are SO many errors on this site it really should be taken down.

First major mistake is to say you are no longer afraid of the sea.

One that truly gets up my nose is the term ‘fully’ rigged ship. It’s a FULL rigged ship!! Your mast names are the wrong way round and just because there may be 3 it doesn’t automatically mean the one in the middle is the main.

I could go on and totally destroy your over inflated but fragile ego but I won’t. All I will say is go learn a lot more before posting.

Shawn Buckles

Thanks for your feedback. If you like to point out anything more specific, please let me know and I will update the articles. I’ve changed fully-rigged to full-rigged ship - which is a typo on my part. I try to be as concise as I can, but, obviously, we all make mistakes every now and then. The great thing about the internet is that we can learn from each other and update our knowledge together.

If you want to write yourself and share your knowledge, please consider applying as a writer for my blog by clicking on the top banner.

Thanks, Shawn

Well, I feel that I’ve learned a bit from this. The information is clear and well laid out. Is it accurate? I can’t see anything at odds with the little I knew before, except that I understood a xebec has a square rigged centre mainmast, such as the Pelican ( https://www.adventureundersail.com/ )

Hi, Shawn, You forgot (failed) to mention another type of rig? The oldest type of rig known and still functions today JUNK RIG!

Why are so many of the comments here negative. I think it is wonderful to share knowledge and learn together. I knew a little about the subject (I’m an Aubrey-Maturin fan!) but still found this clarified some things for me. I can’t comment therefore on the accuracy of the article, but it seems clear to me that the spirit of the author is positive. We owe you some more bonhomme I suggest Shawn.

As they say in the Navy: “BZ” - for a good article.

Been reading S.M. Stirling and wanted to understand the ship types he references. Thank you, very helpful.

This site is an awesome starting point for anyone who would like to get an overview of the subject. I am gratefull to Shawn for sharing - Thanks & Kudos to you! If the negative reviewers want to get a deeper technical knowledge that is accurate to the n-th then go study the appropriate material. Contribute rather than destroy another’s good work. Well done Shawn. Great job!

Good stuff Shawn - very helpful. As a novice, it’s too confusing to figure out in bits and pieces. Thanks for laying it out.

First of all I have to say that Rick ‘the rigger’ is obviously the one with the “over inflated but fragile ego” and I laughed when you suggested he share his knowledge on your blog, well played!

As for the content it’s great, hope to read more soon!

Alec Lowenthal

Shawn, I have a painting of a Spanish vessel, two masted, with. Lateen sails on both masts and a jib. The mainsail is ahead of the main mast (fore) and the other is aft of the mizzen mast. Would this be what you call lugger rig? I have not seen a similar picture. Thanks, Alec.

Thank you for your article I found easy to read and understand, and more importantly remember, which emphasises the well written.. Pity about the negative comments, but love your proactive responses!

This vessel, “SEBASTIAN” out of Garrucha, Almería, España, was painted by Gustave Gillman in 1899.

Sorry, picture not accepted!

Thank you for a very informative article. I sail a bit and am always looking for more knowledge. I like the way you put forth your info and I feel if you can’t say anything positive, then that person should have their own blog or keep their opinions to their-self. I will be looking for more from you. I salute your way of dealing with negative comments.

Thank you for a great intro to sailing boats! I searched different sailboats because I use old sails tp make bags and wanted to learn the difference. Way more than I ever expected. Thanks for all the work put in to teach the rest of us.

Your description of a cutter is lacking, and your illustrations of “cutters” are actually cutter-rigged sloops. On a true cutter, the mast is moved further aft (with more than 40% of the ship forward of the mast). A sloop uses tension in the backstay to tension the luff of the foresail. The cutter can’t do this.

Also, a bermuda-rigged ketch will have a line running from the top of the mainmast to the top of the mizzenmast.

wow great guide to rig types! thanks

Interesting guide, however I am confused about the description of the brig. You say the main mast on a brig can have a lateen sail, but in your picture it looks like a gaff sail to me. How is it a lateen sail?

Hi Shawn, thank you for taking the time to share this information. It is clear and very helpful. I am new to sailing and thinking of buying my own blue water yacht. The information you have supplied is very useful. I still am seeking more information on performance and safety. Please keep up the good work. Best Regards

mickey fanelli

I’m starting to repair a model sailboat used in the lake I have three masts that have long been broken off and the sails need replacement. So my question is there a special relationship between the three masts I do have reminents of where the masts should go. they all broke off the boat along with the sails I can figure out where they go because of the old glue marks but it makes no sense. or does it really matter on a model thank you mickey

Cool, total novice here. I have learnt a lot. Thanks for sharing - the diagrams along with the text make it really easy to understand, especially for a beginner who hasn’t even stepped on a sailing boat.

Daryl Beatt

Thank you. Cleared up quite a few things for me. For example, I was familiar with the names “Xebecs” and “Polaccas” from recent reading about the Barbary War. I had gathered that the two Barbary types were better suited to sailing in the Med, but perhaps they were less able to be adaptable to military uses,(but one might assume that would be ok if one plans to board and fight, as opposed to fight a running gun duel). Specifically, the strangely one sided August 1, 1801 battle between the USS Enterprise under Lt. John Sterett and the Polacca cruiser Tripoli under Admiral Rais Mahomet Rous. On paper both ships seemed nearly equal in size, guns and crew, but pictures of the battle are confusing. While the Enterprise is usually rendered as the familiar schooner, the polacca Tripoli has been pictured in radically different ways. Thus the Wikipedia picture by Hoff in 1878 used to illustrate the Battle shows a Brig design for Tripoli, indicating 77 years later, polaccas were no longer common.

Lee Christiansen

I am curious as to what you would call a modern race boat with a fractional jib,not equipped for full masthead hoist? Thanks Lee

Thanks Guy: The information and pictures really eliminate a lot of the mystery of the terminology and the meanings. Also appreciate the insight of the handling idiosyncrasies “hand” (staff) requirements to manage a vessel for one that has not been on the water much. I long to spend significant time afloat, but have concern about the ability to handle a vessel due to advancing age. The Significant Other prefers to sit (in AC comfort)and be entertained by parties of cruise line employees. Thanks again for the information.

Gordon Smith

Your discussion made no mention of the galleon, a vessel with either square-rigged Fore and Main masts and a shorter lateen-rigged Mizzen, or, on larger galleons, square-rigged Fore and Main masts, with a lateen-rigged Mizzen and a lateen-rigged Bonaventure mast, both shorter than either the Fore or Main masts. Also, it was not uncommon for a galleon to hoist a square-rigged bowsprit topsail in addition to the usual square-rigged spritsail.

Emma Delaney

As a hobbyist, I was hesitant to invest in expensive CAD software, but CADHOBBY IntelliCAD has proven to be a cost-effective alternative that delivers the same quality and performance.

https://www.cadhobby.com/

Leave a comment

You may also like.

What's that sail for? Generally, I don't know. So I've come up with a system. I'll explain you everything there is to know about sails and rigs in this article.

17 Sailboat Types Explained: How To Recognize Them

Different Types of Sailing and Racing Explained

How Are Sail Numbers Assigned? (And how to pick yours)

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

• Demystifying ship masts: A comprehensive guide

Ahoy, fellow enthusiasts of the high seas! In this nautical journey, we embark on an exploration of ship masts, those towering structures that have played a pivotal role in the history of seafaring. Let's unfurl the sails and set sail into the fascinating world of masts and maritime lore.

Unveiling the mast in ship

The mast in a ship is no ordinary pole; it's the heart of the vessel, holding the key to harnessing the power of the wind for propulsion. It's more than just a piece of wood or metal; it's a symbol of human ingenuity and our enduring relationship with the oceans.

Masts on a ship: Where power meets elegance

Ship masts are not a one-size-fits-all affair. They come in various sizes and shapes, each tailored to the specific needs of the vessel. From the towering main mast to the more understated mizzen mast, each has a distinct role to play in the intricate dance of sailing.

Read our top notch articles on topics such as sailing, sailing tips and destinations in our Magazine .

The mast of a ship: A masterpiece of engineering

Crafting a ship mast is an art form that blends tradition with modern engineering. These towering structures are engineered to withstand the most punishing conditions the open sea can throw at them. It's a testament to human craftsmanship.

Single masted sailing vessel: A solo act of seamanship

Imagine sailing solo, with just you, the wind, and a single mast. Single masted sailing vessels are the epitome of simplicity and self-reliance. They harken back to a time when brave souls ventured into uncharted waters armed with little more than their skills and determination.

Three mast schooner under sails on the Baltic sea.

Two masted sailing vessel: Double the sails, double the adventure

Two masted sailing vessels are a sight to behold. With their additional sails and masts, they offer more power and control to sailors. They are the choice of those who crave adventure and challenge on the open water.

Yawls: The elegant compromise

Yawls are graceful sailing boats known for their distinctive mizzenmast positioned aft of the mainmast. This configuration offers several advantages, including better balance and versatility. Yawls are often favored for their ease of handling, making them suitable for both solo and crewed sailing.

Ketches: Versatility afloat

Ketches, with their two masts—the mainmast and a smaller mizzenmast—embody versatility on the water. The mizzenmast adds extra sail area, enhancing maneuverability and control. Ketches excel in long-distance cruising, as they can handle a wide range of wind and sea conditions.

Schooners: The tall ships of yore

Schooners are renowned for their multiple masts, typically two or more, with fore-and-aft rigging on each. This configuration allows for a significant sail area, enabling schooners to achieve impressive speeds. Historically, schooners were common among pirates and privateers due to their agility and speed.

So what are you waiting for? Take a look at our range of charter boats and head to some of our favourite sailing destinations .

Types of Sailboats by Type of Rig

16 December 2015

To have a better idea of which types of sailboats would best suit your needs, your Allied Yachting broker can advise you on the various options available on the market for new or second-hand vessels as well as new construction. In the meantime, here is a summarized guide to the different categories of sailing yachts by type of rig , whether they are monohull (single hull) or multihull , as they’re called in the Mediterranean.

Sailboats by rig type: hulls, masts

Single masted sailboat with monohull

The most common monohull modern sailing yacht is the sloop, which features one mast and two sails, thus sloops are single-masted sailboats. If they have just two sails — a foresail and a headsail — then they’re a Bermudan sloop, the purest type of sailboat. This simple configuration is very efficient for sailing into the wind.

Sailing sloops with moderate rigs are probably the most popular of all cruising sailboats. Just a single-masted sailboat with two sails (a foresail or headsail, and a mainsail) and the minimum of rigging and sail control lines they are relatively simple to operate and less expensive than rigs with multiple masts.

Sloops are adapted for cruising as well as racing, depending on the height and size of their rig.

The cutter sailing yacht is also a monohull similar to a sloop with a single mast and mainsail but generally carries the mast further aft to allow for a jib and staysail to be attached to the head stay and inner forestay, respectively. Once a common racing configuration, today it gives versatility to cruising boats, especially in allowing a small staysail to be flown from the inner stay in high winds.

Thus, a cutter-rig sailboat has an additional sail (the staysail) set on its own stay between the foresail and the headsail.

Cutters are mostly adapted for cruising, but capable of good performance while racing as well.

A ketch is a two-masted sailboat, the main-mast forward and a shorter mizzen mast aft.

But not all two-masted sailboats are ketches — they might be yawls.

A ketch may also carry a staysail, with or without a bowsprit, in which case it would be known as a cutter-rigged ketch.

Ketches are also monohulls, but there is a second shorter mast astern of the mainmast, but forward of the rudder post. The second sailboat mast is called the mizzen mast and its sail is called the mizzen sail.

Yawls have their origins as old-time sail fishing boats, where the small mizzen sail was trimmed to keep the vessel steady when hauling the nets.

Similar to a ketch, the difference being that the yawl has the mizzen mast positioned aft of the rudder post whereas the ketch has its mizzen mast ahead of the rudder post.

Thus, a yawl is also a monohull, similar to a ketch, with a shorter mizzen mast carried astern the rudderpost more for balancing the helm than propulsion.

Schooners are generally the largest monohull sailing yachts.

Monohull two masts sailing boat

A schooner has a mainmast taller than its foremast, distinguishing it from a ketch or a yawl. A schooner can have more than two masts, with the foremast always lower than the foremost main. Traditional topsail schooners have topmasts allowing triangular topsails sails to be flown above their gaff sails; many modern schooners are Bermuda rigged.

A schooner is a two-(or more) masted sailboat, in which the aft-most mast – the mainmast – is the same height or taller than the foremast. Many sailors agree that of all the different types of sailboats, a schooner under full sail is one of the most beautiful sights afloat.

Gaffed-rigged sailboats, or “gaffers”, have their mainsail supported by a spar – the “gaff” – which is hauled up the mast by a separate halyard. Often these types of sailboats are rigged with a topsail. The gaff rig is no longer seen on modern production yachts.

A catamaran (‘cat’ for short) is a multihull yacht consisting of two parallel hulls of equal size.

A catamaran is geometry-stabilized, that is, it derives its stability from its wide beam, rather than having a ballasted keel like a monohull. Being ballast-free and lighter than a monohull, a catamaran can have a very shallow draught. The two hulls will be much finer than a monohull’s, allowing reduced drag and faster speeds in some conditions, although the high wetted surface area is detrimental in lower wind speeds, but allows much more accommodations, living and entertaining space in stability and comfort.

Two parallel hulls sailing catamaran

The speed and stability of these catamarans have made them a popular pleasure craft in Europe, most high-quality catamarans are built in France, but careful since their wide beams aren’t easy (or cheap) to berth in the French Riviera.

Racing catamarans technology has made them today’s leading racing sailboats of the world, like in the latest editions of America’s cup or other renowned transoceanic races.

Please surf through our website listings of sailing catamarans .

OTHER MULTIHULLS

Even harder to berth in the Mediterranean, and most commonly designed for around-the-globe racing rather than cruising, the trimarans have also been gaining some popularity in the western hemisphere, especially by naval designers with futuristic projects.

A trimaran is a multihull boat that comprises a main hull and two smaller outrigger hulls (or ‘floats’) which are attached to the main hull with lateral beams.

MOTORSAILER

A motorsailer or “motorsailor”, is a type of sailing vessel, typically a pleasure yacht, that derives propulsion from its sails and engine(s) in equal measure.

While the sailing yacht appeals primarily to the purist sailing enthusiast, the motorsailer is more suited for long-distance cruising, as a home for ‘live-aboard’ yachtsmen. The special features of the motorsailer (large engine, smaller sails, etc.) mean that, while it may not be the fastest boat under sail, the vessel is easily handled by a small crew. As such, it can be ideal for retired people who might not be entirely physically able to handle large sail areas. In heavy weather, the motorsailer’s large engine allows it to punch into a headwind when necessary to make landfall, without endless tacking to windward.

The Turkish word gulet is a loanword from the French goélette, meaning ‘schooner’.

A gulet is a traditional design of a two-masted (more common) or even three-masted wooden sailing vessel from the southwestern coast of Turkey, particularly built in the coastal towns of Bodrum and Marmaris; although similar vessels can be found all around the eastern Mediterranean. For considerations of crew economy, Diesel power is commonly used on these vessels, similar to a motorsailer. Today, this type of vessel, varying in size from 14 to 45 meters, is very popular and affordable for tourist charters in Turkey, the Aegean, Greece and up to Croatia in the Adriatic.

Please surf through our website listings of cruising sailing yachts by type of rig.

OUR YACHT LISTINGS:

• New Yachts for Sale
• Pre-owned Yachts for Sale
• Yachts for Charter

You might also like

Yachting Consultants

Sale-Charter-Brokerage-Management

Headquarters:

34 Rue Caffarelli 06000 Nice, France

Front Office:

Boulevard de La Croisette – Port Canto 06400 Cannes, France

T.: +33 493 43 82 83 Email: [email protected] Website: www.alliedyachting.com

RetireFearless

What Is A Boat With 2 Masts Called?

We’re familiar with boats that have one mast. However, what about those with two? What is a boat with two masts called?

March 16, 2023

This article may contain affiliate links where we earn a commission from qualifying purchases.

Most sailors have a profound fascination for dual-mast boats. The great thing about such boats is that they offer a great level of balance. From an aesthetic viewpoint, boats with two masts appear beautiful and majestic. But what are they called?

The most common names for boats with two masts are Ketch, Yawl, Brig, and Schooner. The designs of these boats are variable, but the primary idea remains the same. An extra mast in the front is called the foremast, while an extra mast in the back is called a mizzenmast.

Usually, the aft-mast is shorter than the mainmast. The aft-mast, also known as the mizzenmast, stabilizes a sailboat while serving as a bow-thruster in some conditions. In windy conditions, the mainmast can be broken down while the mizzenmast remains intact, thus resulting in a comfortable and balanced sail.

As professional sailors, we take great pride in educating our readers about the different types of boats. Here are some of the most popular dual-mast boats.

Table of Contents

Yawls are the most common types of dual-mast boats out there. It has a mainmast and a mizzenmast. The mizzenmast is shorter than the mainmast. It is an oblique boat with the mainmast in the front, and the mizzenmast in the rear. The mizzenmast of the Yawl enhances the balance of the helm, and it is mostly located behind the rudder.

Another essential type of two-mast boat is the Ketch. This boat is often mistaken for a yawl. Therefore, it is better to understand the differences between the two. They both have the mainmast in the front, with the smaller mizzenmast in the rear end. The primary difference between these two is mast location.

In a yawl, the mizzenmast is situated behind the rudder, while in Ketches, the mizzenmast is located in front of the rudder post.  In Ketches, the mizzenmast is just as big as the mainmast, and it carries a mainsail. The purpose of the mizzenmast is to keep the boat moving forward, especially when the conditions are aggressively windy.

On the flip side, the mizzenmast of a yawl can only enhance the helm balance. However, it cannot push the boat forward. Furthermore, the mizzenmast of the ketch is bigger than that of a yawl. It won’t be wrong to say that the mizzenmast of a Ketch is a driving sail, whereas that of a yawl is only a balancing sail.

If we compare a ketch to a sloop , the ketch enjoys a great advantage, especially when moving downward or against heavy winds. The reason behind its success is its versatile design, unlike a conventional sloop. The mizzenmast of a ketch depowers the wind in a number of different ways. It can also find the right amount of canvas for it to fly. It stabilizes the sailboat, provided it is placed in the right position.

Amongst other boats, a ketch offers a number of practical benefits, considering the different weather conditions a boat may face when on water. Apart from sailing smoothly on a beam-reach, ketches are easy to handle, which helps you learn faster if you are still a beginner.

Unlike a ketch, in a schooner , the foremast is smaller than a mizzenmast. Although you can't really spot the difference between the two masts, if you look closely, you will see the difference in their heights. The foremast will appear shorter than the mizzenmast. Unlike a schooner, a sloop has a single mast. However, the schooner is easier to sail, but it isn't as fast as a schooner. That being said, the schooner looks fabulous when under full sail.

The most common schooners out there are the ones with a square topsail. However, there are some shapes out there that run diagonally. On bigger sea routes, schooners with bigger sails aren't the most ideal boats. The reason is that a spirit rig cannot be lowered. If it is, it can become difficult to handle for some people. However, the spirit rig works perfectly in coastal conditions, provided the topsail is capable of catching a high breeze.

Just like the schooners and ketch, the Brigs also have two masts. However, the mainmast is squared, and in some cases, triangular. In some brig boats, the mainmast has a lateen mainsail. Initially, the brigs were used by pirates who pushed them forward using oars.

Therefore, the word brig has been derived from the Italian word brigantine, which means pirate. Before becoming sailboats, briggs were used by pirates in the Mediterranean back in the 16th century. Here are some kinds of brigs.

In a brigantine, the foremast is square in shape, while the mainmast is triangular.

Hermaphrodite Brig

This type of brig is also known as the half brig or the schooner brig. Both the masts on this boat are partially squared, but the primary mast is gaff-rigged. This design makes it the closest thing you can find to a schooner.

The great thing about brigs is that they are fast, maneuverable, and easy to handle. This is part of the reason why pirates used them in the 16th century. Pirates could easily hop in and leave without the fear of getting caught.

These were the most common boats with two masts. If you are a sailing enthusiast, you can opt for any one of them. However, there are a few factors you need to consider. The first two things to consider are your affordability and the reason for purchasing or renting a specific dual-mast boat.

You also need to consider your boating and sailing skills. If you lack experience and boating skills, it is in your best interest to opt for a ketch. Lastly, factor in the weather and the conditions you will be driving your boat in.

Recent Articles

What Size Sailboat Can One Person Handle?

How To Tie A Sailboat To A Mooring Ball Ring

What Is The Ideal Wind Speed When Sailing?

How To Use a Sailboat Winch

Things You Need To Liveaboard a Sailboat

Types of Sailboat Keels

I'm Michael Moris. I've been sailing my whole life, and it has taken me to places I never imagined. From the Caribbean to Europe, from New Zealand to South America - there's nowhere that hasn't felt like home when you're on a boat!

Trending Articles

How Far Is Havana From Miami By Boat?

Yachting Vs Sailing

Who Is Sailing Doodles?

Subscribe To Our Newsletter

Thank you! You're signed up for our free newsletter!

Oops! Something went wrong while submitting the form

About Our Team

We are a publishing team of licensed Nursing Home Administrators, Nurses, Assisted Living Directors, Health Professionals, Gardeners, and individuals with vast experience with senior living and activities.

©2024 Retire Fearless. All rights reserved.

We can be reached via email at [email protected]

Retirefearless.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs such as CJ, ClickBank and more, and is compensated for referring traffic and business to these companies.

Facebook Pinterest