laser sailboat storage racks

• Accessories
• Tips & Tricks

Confirm your age

Are you 18 years old or older?

Come back when you're older

Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.

PART #:13003-1

Dynamic Dolly, Type 3

• Dolly style allows bow of boats with a curled gunwale to hang from a specifically shaped handle fitting. Snug-fitting edge trim atop the handle fitting protects the gunwale gelcoat. Type is suitable for Sunfish, Laser 2, JY 15, and more.
• Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
• All joint fittings are through-bolted and designed for increased torque stability.
• Strong, 3” non-stretch, polyester sling provides wrap-around boat support.
• Adjustable, flexible V-fittings on bow and tongue tubes provide boat support forward of the sling and prevent boat and aluminum contact.
• Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
• Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
• Pneumatic, non-corrosive, 16” x 4” wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.

Customer Reviews

I bought this to transport a Sunfish from my house to a boat ramp about a 1/2 mile away. The dolly arrived quickly and it took me about an hour to put it together. The instructions could have been more clearly designed, imo, but it was largely intuitive. The quality of parts and finish is excellent. Once it was together, it was relatively easy to walk my boat to the ramp. The dolly feels well-balanced and maneuverable. I did find myself wishing there was a better way to secure the front of the boat to the front of the dolly—or some tips on how to do this—since mine kept getting a little play in it and bouncing around while I walked. Other than that no complaints. This was a bit of a spurge and the product definitely feels worth the price.

"Do we like them? Yes. We have 6 of them. Great customer service, excellent quality materials that survived our saltwater environment, and we really like the tubed tires and Delrin bearings. Cheers Clark and Skipper Small Boat Restoration"

"Great way to move my Sunfish! As the bow drops off the front when it is pulled, it should have a way to secure the nose of the Sunfish to the trolley."

Excellent instructions

I'm very happy with the dolly. It's easy to assemble. I received my dolly in just a few days after I ordered it.

You may also like

888-274-8490

Racks can be configured from Two to Two hundred or more

OUT of Stock

CLICK Here for  Alternate Racks

*Accessories Qualify for Free Shipping with Purchase of Storage Rack

  A B-4 Anchor   Set of Four  L Brackets and Bolts  are Aluminum    

• P.O. Box 3265 Huntersville, NC 28070
• Phone: 704.907.7544
• Fax: 704.948.8278

• rack design

Welcome To Boat Racks 101, LLC.

Boat Racks 101, LLC specializes in providing boat storage racks to the marine industry. Created by the former owner of Coastal Marine International, Inc., Patrick Farrell, the company relies on over four decades of proven experience to provide the best designed, best built rack systems available.

We founded Boat Racks 101 on four cornerstones Quality, Design, Service, and Experience. Our strength as a leader in the dry stack industry assures that we provide the highest quality and most technically advanced boat storage racks to our clients. The integrity of our design, as evidenced by the thousands of boats stored in our structural steel rack systems worldwide, has remained a constant characteristic of our products.

Our commitment to servicing our customers has been an important factor in our success, and will continue to set us apart from our competitors in the future. And our experience in working with marina owners, developers, designers, and contractors to provide new boat storage racks and to upgrade old rack systems enables us to develop innovative and cost effective solutions to your storage needs.

Whether you plan on installing free-standing boat racks inside or outside, rely on our expertise to provide you with the best racks that you can buy. Let us show you how we can help satisfy your boat storage needs. We look forward to discussing your plans with you.

Contact us today with any questions you may have.

DONATE ›

Register ›.

• Hours & Location
• Job Opportunities
• Boards of Directors & Trustees
• Community Partners
• Forms & Publications
• Adult Programs
• Northern Vermont High School Sailing Team (NVHSST)
• Private Instruction
• Group Programs
• Junior Instructor Program
• Paddleboard
• Kayak & Canoe
• Sailing Diversity Access Initiative
• Women in Wind
• Floating Classrooms
• Adaptive Watersports
• Rental Procedures & Rules

Ground & Rack Storage

• Venue Rental

The Community Sailing Center is home to sail and human-powered boats of all kinds and sizes. We are especially well suited to house your kayaks, canoes, rowing dinghies Lasers, Sunfish, and boats 12-24′ on trailers. We only have Winter Storage currently available.   We are pleased to offer heated indoor storage in the winter!

For all outside storage, boats may be stored on racks, trailers or tires in the boat yard.

For indoor winter storage you drop off your boat with us and we store it for you.  This offers an enclosed climate controlled environment maintained at 60-70 degrees.  No need to winterize or cover your boat!  Please see our Frequently Asked Questions for the winter storage season to see which option is right for you.

Registration:

All space is first come first served and priority is given to returning storage customers. To register please fill out and send in the 2023-24 Winter Boat Storage Registration .

Forms and payment may be mailed to:

Community Sailing Center P.O. Box 64818 Burlington, VT 05406

For all registration or general storage program questions or to be placed on the list for winter storage, please email Tilly Ettlinger or call the Sailing Center at 802-864-2499.

Winter Storage Rates 2023-24

Dates: November 1, 2023- May 10, 2024

Outside Winter Storage

Ground – Charged by the square foot. Boats on pads/tires or boat on trailer/dolly

• Boats up to 25’ (Measured LOA from coupler to stern and BEAM wheel to wheel)- $3 per sq/ft
• Rack storage for one boat – $200
• for each additional boat that fits on the same rack – $75

Inside Winter Storage

• Boats up to 25’ (Measured LOA from coupler to stern and BEAM wheel to wheel)- $5 per sq/ft
• Additional boat in the same space (kayak, canoe, rowboat, SUP that occupies same footprint)- $100 per boat

Rack – Charged by the rack space. Laser, Sunfish, Canoe, Kayak, Sailboard, etc. (You may fit up to two boats per rack)

• Single boat on rack- $350 per rack
• Second boat on the same rack- $100 per boat

Boat Hoist Use

Due to ongoing construction, hoist use may be limited or unavailable.

Hoist users must provide their own boat lifting equipment and must call ahead to ensure hoist availability and access.

• One-time hoist use – $4/ft
• Season hoist use – $8/ft

For additional information regarding boat storage or hoist use please contact Tilly Ettlinger via email or by phone at 802-864-2499.

• Privacy Policy
• [email protected]
• 802.864.2499

2m tall double side

2.5m tall single side, 2.5m tall double side.

Each rack is made up of the following parts;

there are 2 types, one each for single sided and for double sided racks.

there is one design, but with 4 choices of height. They are all made with a series of holes (vertically, every 50mm), so that the arms can be attached (with bolts), at different heights, so that you can chose the best position for your needs.

Cross stays

there is one design, but with 3 choices of length (span).

only used with double sided racks, to connect pairs of uprights. There are 2 types; With the 620mm connector, unless the arms are staggered at different heights on each side, there is potential for riggers to clash. The advantage of this type is that the overall width of the rack is minimised. With the 1,180mm connector, arms can be the same height on both sides, and riggers will not clash. This type is recommended for places where there is sufficient space..

there are the following types;

• A basic 700mm long square pipe (50mm x 50mm) that has been welded to a steel back plate.
• A basic 800mm long square pipe (50mm x 50mm) that has been welded to a steel back plate. This is useful for 8s and other wide boats.
• Both basic arms have an extruded rubber top to protect your boats.
• A heavy duty 800mm long square pipe (50mm x 50mm) that has a much longer steel back plate and a steel pipe gusset from the bottom of the base plate to the middle of the arm, to provide reinforcing.
• A heavy duty 1000mm long square pipe (50mm x 50mm) that has a much longer steel back plate and a steel pipe gusset from the bottom of the base plate to the middle of the arm, to provide reinforcing.
• Both heavy duty arms can be used just like this (the extruded rubber top needs to be ordered separately, as it is not included in the price), or you can order them with 600mm heavy duty sliding rails and the outer part, which comes with comes with rubber on the top surface.

For small boats

(1s and 2s), it is usual to support boats with just 2 arms. For this, the ideal span is 2.8m.

there is a choice of either 2 or 3 arms to support each boat. For 2 arms, you may choose a span of either 4.2m, or 5.6m. For 3 arms, you will need to have a double span of 2.8m.

it is usual to support boats with 3 arms. For this, the usual span is 5.6m, which is doubled to 11.2m.

For single sided racks

3 cross stays will be needed, unless you have chosen to use 3 arms to support each boat, in which case you will need 6 cross stays.

For double sided racks

4 cross stays will be needed, unless you have chosen to use 3 arms to support each boat, in which case you will need 8 cross stays.

2 uprights will be needed, unless you have chosen to use 3 arms to support each boat, in which case you will need 3 uprights.

4 uprights will be needed, unless you have chosen to use 3 arms to support each boat, in which case you will need 6 uprights.

These racks can be fitted with wheels.  The wheels are 200mm in diameter, and there are 2 types;

• “Free” wheels that can move in any direction, and have a brake.
• “Fixed” wheels that can only move in one direction.

If wheels are not used, the bases need to be lifted from the ground a little, to avoid resting on the heads of bolts. This can be done with some small blocks of wood (not provided by us), or by attaching our purpose made feet.

200mm diameter heavy duty "fixed" wheel (Mbr-wheel2)

200mm diameter heavy duty "free" wheel (Mbr-wheel1)

• O’pen Skiff Purchase Page
• ILCA – Element 6
• RS Sailboats
• Sunfish – Recreational
• Sunfish – Race Version
• Sunfish Sails
• LaserPerformance Sunfish Parts Price List
• 420 – Zim Sailing
• Finding the Right Laser Rig: Formula
• Racks by Dynamic Dollies and Racks
• Load Rite Trailers
• Load Rite Sunfish Trailer
• **NEW** LoadRite for Sailboats
• Sunfish Dolly by Dynamic
• Optimist Dolly by Dynamic
• How to Apply Laser Sail Numbers
• Applying Laser Sail Numbers
• North Sails for LaserPerformance Dinghies
• About/Contact

Laser – LaserPerformance

$ 5,100.00

Please Contact Us for Availability

Share this:.

• Click to email this to a friend (Opens in new window)
• Click to share on Facebook (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to print (Opens in new window)
• Click to share on Pinterest (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Tumblr (Opens in new window)
• Click to share on Reddit (Opens in new window)

Description

• Reviews (0)

Laser Class Laser by LaserPerfomance – $6,475.00!

Features Laser sailing is an investment in skills that will last a lifetime, skills that apply to any boat. Laser sailors have access to a community of sailors from around the world who love to race. One Laser sailor in Honolulu recently recorded the first Laser speed record at 16.8 knots, or 28 feet per second. ( Link to our Laser speed record story ) When you are ready to race, get into a Laser.

The International Laser Class hosts more events in more nations than any other one-design class in the world. In North America alone there are more than a thousand events each year. Whether you choose to race in local club events or international championships there is an event for everyone. The International Laser Class magazine,  Laser World  and the North American class magazine  Laser Sailor  will always keep you up-to-date on future events, results, and tips to improve your Laser sailing.

The International Laser Class Association runs a circuit of Masters events for Laser sailors over 35 years of age. The Masters circuit culminates in the Laser Masters World Championship which is held annually. The Laser Masters racing circuit is the largest and most heavily attended masters racing group of any one-design class in the world.

Contact Shoreline Sailboats for more information about the Laser or to order your boat:

There are no reviews yet.

You must be logged in to post a review.

Related products

Sunfish – Race Version

420 by Zim Sailing

THE MELGES 15!

THE ROCKET! Built in the USA

SUNFISH – SAIL A CLASSIC!

Recent Posts

Hours & Info

Search products.

Contact us:

Any questions about the sailboats we sell, or the services we provide? We’re always eager to talk sailing and would enjoy helping you with any of your sailing needs. Contact Us

Designed by WPZOOM

My Account | Sign-in

RACKS BY PRODUCT

ALL PRODUCTS Kayak Racks Canoe Racks Stand-up Paddle Board (SUP) Racks Surfboard Racks Paddleboat Racks Sunfish Sailboat Racks Wood Storage

RACKS BY STORAGE SPACE

1 Place Racks 2 Place Racks 3 Place Racks (Best Sellers) 4 Place Racks (Best Sellers) 5 Place Racks 6 Place Racks (Best Sellers) 7 Place Racks 8 Places Racks (Best Sellers) 10+ Places Racks (Best Sellers)

RACKS BY TYPE

Wall Mounted Dock Mounted Free Standing Buried in the Ground Heavy Duty Commercial Racks One Sided Bike Racks Cables & Accessories

• Rack Details
• Shipping & Packaging
• Canadian Shipping
• Product Warranty
• Testimonials
• SHOP ALL RACKS
• View Pricing
• 4 Kayak + 4 SUP Racks
• 6-Slot Kayak Racks
• 4-Slot Kayak Racks
• 2-Slot Kayak Racks
• Custom Kayak Racks
• Kayak Storage
• Canoe Storage
• Paddle Board Storage
• Commercial Racks
• Custom Ideas

1 Sunfish Sailboat Plus 3 Canoes or Kayaks with Boom Rack

From: $ 1,138.99

*Choose From Available Finishes Below For Final Price

Free Shipping to the Contiguous United States

• Made of 100% northern white cedar logs with mortise and tenon joinery
• Holds Sunfish sailboat or Small Rowboat and 2 Canoes with 1 Kayak on feet.
• Made in Manitowish Waters, Wisconsion, Made in USA
• 1-year warranty, Finished with Transparent Finish

WE ALSO RECOMMEND

You may also like…

Ground Screw Anchor Kit Including Cable – 15″

Ground Screw Anchor Kit Including Cable – 30″

Custom Soft Rest UV Webbing

Lariat Security Cables Kit

Safety Wind Tie Down Polyester Webbing

• Product Dimensions
• Product Details
• Instructional Assembly Video
• Frequently Asked Questions
• Shipping Information
• Reviews (3)

Low 2 SUP 2 Kayak Canoe Rack with Storage Pegs Details

The 1-Sunfish Sailboat + 3 Canoes or Kayak with boom rack is built with Northern White Cedar from the Upper Peninsula of Michigan. The Sunfish Boom fits on the back of the rack. This rack is designed for functionality and aesthetics by lake homeowners. It not only cares for and organizes your boats, but it can also be matched to its surroundings being log construction.

With finishing options, you can match dock, house, etc… or let it turn silver/gray with no finish, or you can use your own finish if so desired. This rack holds 1 Sunfish Sailboat, the heaviest of canoes, Surfboard, Kayaks, and SUPS (Stand Up Paddleboards). Each boat can weigh up to 100 pounds. This rack has up to a 400-pound capacity. We have worked with logs for over 23 years crafting log homes, furniture, and kayak racks. Each joint is glued and screwed for longevity. We use glued mortise-and-tenon joinery wherever possible. Hand made and finished by Log Artisans in Northern Wisconsin.

For Do-it-Yourselfers, use a stain or outdoor finish in the color of your choice and follow the instructions on the can. Breathable finishes will extend the life of the rack the most. It is best to let the wood age a bit prior to finishing it. This helps the stain to soak in. You can also choose to leave it unfinished. In this case, it will weather to a gray color and still last for many years.

Easy to lift kayak or canoe in and out. Locking kayak is easy with a cable lock from local kayak store. Durable kayak storage racks, can carry the heaviest of canoes, kayaks, and boat loads! Soft rest UV webbing available and tie down safety straps available now.

We want you to enjoy your Log Kayak Rack for years to come. To ensure it’s longevity, we recommend that the feet are not in direct contact with the ground, but rather raised and set on landscaping block or a similar product.

Our Kayak Racks can be bolted to dock or such or kit can be bought for anchoring to the ground.

We can install strapping to prevent any wind blowing the kayak off (this would be a rare occurrence).

For extra-long kayaks, canoes, or boats we can lengthen cross rails to accommodate. We can customize any rack for your row boat, paddle boat, etc. Several boats, kayaks, canoes, and paddle boats can fit together on the racks. Custom racks can be cemented into the ground or bolted to a platform.

Call for information as to which designs would work best for your assortment.

How will the Kayak Rack arrive?

Kayak racks are shipped unassembled and in a box. Log Kayak Racks products are shipped by UPS ground. You can expect your storage rack to arrive around 2 weeks after payment is received, or within the next 2 ½ weeks after placing the order (unless you call for a specific shipping date). They will come with glue, torx bits and fasteners needed to assemble and will go together in approx. 30 – 60 minutes with a common power drill or screw gun. Instructions are included and are available as a video online.

Can my delivery sit outside until I assemble it?

Yes, the Log Kayak Rack is for indoor or outdoor use, so no damage will occur to the product if it sits out until you can assemble it, or get it to the cabin. The only thing is the box and directions may get wet but there are always the downloadable and printable assembly instructions and assembly video on our website.

How do I Preserve the Life of this Kayak Rack?

We want you to enjoy your Log Kayak Rack for years to come. To ensure its longevity, we recommend that the feet are not in direct contact with the ground, but rather raised and set on landscaping block or a similar product.You can order it with a finish (upgrade) or you can finish it yourself. Use a stain or outdoor finish in the color of your choice and follow the instructions on the can. Breathable finishes will extend the life of the rack the most. It is best to let the wood age a bit prior to finishing it. This helps the stain to soak in. You can also choose to leave it unfinished. In this case, it will weather to a gray color and still last for many years.

Can Canoes, Paddle boards, Wake boards, Surf Boards, Small Rafts, Paddle Boats or Other Small Boats up to 100 lbs. fit on these Kayak Racks?

Yes. If you have a specific model in question contact us directly at 1-715-543-2006 and we’ll let you know if the dimension and size of your boat will fit.

Can I secure this Kayak Rack to the Ground?

Yes. You can bolt it to any wood surface with wood screws. There are also kits you can purchase from our online store, use the following instructions to do so using our kit.

• Insert the sharp tip of a spiral ring anchor into the dirt near the bottom center of the rack, if you are using one twist anchor. If you are using more than one, evenly space out.
• Twist the anchor by hand so that it spirals into the soil. Stop when the spiraled section is completely hidden underground and only the ring on top of the anchor is visible.
• Run a chain, cable or straps through the ring at the top of the anchor, then pass this same line over and around the center cross rail on kayak rack.
• Secure the cable or chain using a small padlock or combination lock if desired. Tighten straps to keep rack tight to the anchors in the ground.
• This method can be completed by using a kit purchased from LogKayakRack.com or purchase your own online or from a store. This method can be used to protect the rack from being stolen or from strong winds.

Is there an Alternative way of Ordering a Kayak Rack without using the Shopping Cart?

Yes, you may call to order or send a check in the mail to Hitch Exclusives 660 US Highway 51 Manitowish Waters, WI 54545

Each Ordered Product Includes:

• Feet, Cross Rails, Legs, Upper and Lower Arms, and Lower Support Posts (all labeled)
• Instruction Pack
• 3 Inch GRK Screws
• 4 Inch GRK Screws
• Two Tips, Green and Black for Drill or Screw Gun (in the bag with 3 inch screws)
• Decking Screws

What is Needed but NOT Included for Assembly:

• Rubber Hammer/Mallet
• Power Drill or Screw Gun
• Gloves (optional)

3 reviews for 1 Sunfish Sailboat Plus 3 Canoes or Kayaks with Boom Rack

Per Ostman (Verified Rack Owner) – December 4, 2022

Great quality boat rack kit and easy to assemble.

Ross Martin (Verified Rack Owner) – July 18, 2022

Exactly what I was hoping

Anonymous – September 4, 2015

Perfect for our cottage “Thanks Kurt. Your product was perfect for our cottage. Usually I see something perfect and then find it does not ship to Canada.”

Your email address will not be published. Required fields are marked *

Your review  *

Name  *

Email  *

Save my name, email, and website in this browser for the next time I comment.

YOU MAY ALSO LIKE

Related products

3-Place 1-Sided Kayak Rack With Extended Feet

2 Place Kayak / Canoe Rack – Buried

Low 2 SUPS + 2 Kayak with Storage Pegs

2-Sunfish Sailboat + 2 Canoes or Kayak Rack

• New comments
• Military Photos
• Russian Military
• Anti-Aircraft
• SA-21/S-400 Triumf

96L6E Radar, S-400

• Oct 18, 2010

Media information

Share this media.

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

40 Facts About Elektrostal

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact:

Free Shipping Over $99* - 366 Day Returns - Dedicated Customer Support

• Call Us +1-503-285-5536
• Sign in & Register
• Recently Viewed

Guide to Laser Sail and Rig Sizes

Over 200,000 Laser sailboats have been built over the last 40 years, more than most other small dinghy sailboats. In this article we are going to answer one of the most common questions we get: What size rig do I have?  This will help answer what size sail and/or rig you already have and what size sail and/or rig you need to purchase to update your Laser. 

What size rig / sail do I have? Standard vs. Radial vs 4.7 Explained

The Laser sailboat has had a number of different rig sizes, with the intention of making the boat sailable by a wide range of sailors (and different sailor weights) by simply swapping out the lower mast section and sail while keeping all other components the same. There are currently three different rig sizes and they are commonly referred to as 'Standard', 'Radial' and '4.7'. Below you will find an image that shows the three rigs side by side, and in the following section we'll explain each one.

Laser Standard / MK2 / ILCA 7

This is the most common Laser rig size, and the original rig on the boat when it was designed. It features a 7.06 square meter sail (about 76 square feet). In 2018, the Laser Class approved a new 'Standard' sail, which is referred to as the 'MKII' or 'Mark 2' to distinguish it from the first version. The difference, among other things, is in the panels. The original 'Standard' sail featured horizontal cut panels. The new MkII sail has radial cut panels. There is no difference in size between these two versions, and as of 2020 all new Laser Standard sails are available in this updated cut.  

How to tell if you have a 'Standard' sail:  The first and most obvious way to tell if you have a 'Standard' sail is to look at the panels. If they are horizontal, it is most likely a standard sail. Next, you can measure the luff (the front edge of the sail along the mast sleeve). This measurement should be about 5130 mm or 200 inches  from the top of the sail to the bottom.

How to tell if you have a 'Standard' lower mast section:  The 'Standard' lower mast section should measure about 2865 mm or 113 inches . It is a fairly stout mast section compared to the two smaller mast sections. 

Laser Radial / ILCA 6

Originally called the 'M' rig when first designed, the Laser 'Radial' sail is smaller than the 'Standard' sail at 5.76 square meters (62 square feet). At the time, it was the only Laser sail to feature the radial cut panels, which allowed the sail to be de-powered more easily in bigh winds. Per the notes about the 'Standard' rig above, both the Standard and Radial sail feature the radial cut design. Another typical indicator of a Radial size sail are the blue panels at the tack and clew of the sail.

How to tell if you have a 'Radial' sail:  The first and most obvious way to tell if you have a 'Standard' sail is to look at the panels. If they are radial, as in emanating out from the center, it is most likely a radial sail. Next, you can measure the luff (the front edge of the sail along the mast sleeve). This measurement should be about 4560 mm or 180 inches  from the top of the sail to the bottom.

How to tell if you have a 'Radial' lower mast section:  The 'Radial' lower mast section should measure about  2262 mm or 89 inches . It is also a bit smaller in diameter than the standard section. 

Laser 4.7 / ILCA 5

The Laser 4.7 (or ILCA 5) is the smallest of the three Laser sails and was designed for young sailors just getting into Laser sailing. The 4.7 lower mast section is also different from the others in that is has a pre-bend near the boom fitting, allowing the sail to depower much easier. This is the least common Laser sail size, and if you have an old one around, chances are it is not a 4.7 sail.

How to tell if you have a '4.7' sail:  The 4.7 is similar to the old 'Standard' sail as it has cross cut panels. Many 4.7 sails also have an obvious 4.7 logo somewhere on the cloth. Next, you can measure the luff (the front edge of the sail along the mast sleeve). This measurement should be about  4080 mm or 160 inches  from the top of the sail to the bottom.

How to tell if you have a '4.7' lower mast section:  The '4.7 lower mast section has a pre-bend in it and should measure about 1810 mm or 71 inches . The bend is the easiest way to tell it apart from the others. 

Application for the calculation of individual solutions

I agree with the privacy policy

Ensure that your data will not be passed to 3rd parties or used in spam mailings.

Thank you, Your request has been accepted.

Rosatom Starts Production of Rare-Earth Magnets for Wind Power Generation

TVEL Fuel Company of Rosatom has started gradual localization of rare-earth magnets manufacturing for wind power plants generators. The first sets of magnets have been manufactured and shipped to the customer.

In total, the contract between Elemash Magnit LLC (an enterprise of TVEL Fuel Company of Rosatom in Elektrostal, Moscow region) and Red Wind B.V. (a joint venture of NovaWind JSC and the Dutch company Lagerwey) foresees manufacturing and supply over 200 sets of magnets. One set is designed to produce one power generator.

“The project includes gradual localization of magnets manufacturing in Russia, decreasing dependence on imports. We consider production of magnets as a promising sector for TVEL’s metallurgical business development. In this regard, our company does have the relevant research and technological expertise for creation of Russia’s first large-scale full cycle production of permanent rare-earth magnets,” commented Natalia Nikipelova, President of TVEL JSC.

“NovaWind, as the nuclear industry integrator for wind power projects, not only made-up an efficient supply chain, but also contributed to the development of inter-divisional cooperation and new expertise of Rosatom enterprises. TVEL has mastered a unique technology for the production of magnets for wind turbine generators. These technologies will be undoubtedly in demand in other areas as well,” noted Alexander Korchagin, Director General of NovaWind JSC.

For reference:

TVEL Fuel Company of Rosatom incorporates enterprises for the fabrication of nuclear fuel, conversion and enrichment of uranium, production of gas centrifuges, as well as research and design organizations. It is the only supplier of nuclear fuel for Russian nuclear power plants. TVEL Fuel Company of Rosatom provides nuclear fuel for 73 power reactors in 13 countries worldwide, research reactors in eight countries, as well as transport reactors of the Russian nuclear fleet. Every sixth power reactor in the world operates on fuel manufactured by TVEL. www.tvel.ru

NovaWind JSC is a division of Rosatom; its primary objective is to consolidate the State Corporation's efforts in advanced segments and technological platforms of the electric power sector. The company was founded in 2017. NovaWind consolidates all of the Rosatom’s wind energy assets – from design and construction to power engineering and operation of wind farms.

Overall, by 2023, enterprises operating under the management of NovaWind JSC, will install 1 GW of wind farms. http://novawind.ru

Elemash Magnit LLC is a subsidiary of Kovrov Mechanical Plant (an enterprise of the TVEL Fuel Company of Rosatom) and its main supplier of magnets for production of gas centrifuges. The company also produces magnets for other industries, in particular, for the automotive

industry. The production facilities of Elemash Magnit LLC are located in the city of Elektrostal, Moscow Region, at the site of Elemash Machine-Building Plant (a nuclear fuel fabrication facility of TVEL Fuel Company).

Rosatom is a global actor on the world’s nuclear technology market. Its leading edge stems from a number of competitive strengths, one of which is assets and competences at hand in all nuclear segments. Rosatom incorporates companies from all stages of the technological chain, such as uranium mining and enrichment, nuclear fuel fabrication, equipment manufacture and engineering, operation of nuclear power plants, and management of spent nuclear fuel and nuclear waste. Nowadays, Rosatom brings together about 350 enterprises and organizations with the workforce above 250 K. https://rosatom.ru/en/

U.S. Added Less New Wind Power in 2021 Than the Previous Year — Here’s Why

Record Demand in New York’s Latest Offshore Wind Solicitation

Repsol and Ibereólica Renovables Start Producing Electricity at the Atacama Wind Farm (Chile)

Australia’s First Offshore Wind Project Moves Forward with Labour Market Study

Siemens Gamesa to Deliver Hybrid Plant in Philippines

SOUTH AFRICA: BioTherm Energy Connects its Excelsior Wind Farm to the Grid