radio controlled soling sailboat

SOLING 1 METER

Class contact information.

Click below

Class Email

Class Website

One-Design Class Type: Radio Control

Was this boat built to be sailed by youth or adults? Both

Approximately how many class members do you have? 690

Photo Credit:AL Fearn

Photo Credit: Mike Wyatt

About SOLING 1 METER

The Soling Class is the largest class affiliated with the American Model Yachting Association (AMYA). It is a one-design class. The One Meter was designed to be a low-cost, kit-based one-designed class primarily targeted at the beginning Radio-Controlled (R/C) sailor. It is often the local class that beginning sailors start with and yet it is challenging enough that most advanced racers still race their Soling. The hull, deck, keel, and rudder are made from vacuum formed polystyrene plastic. Only flat single-paneled sails are approved by the Soling Class. Only two channels are used to control the boat. One channel for both sails and the other channel for the rudder. Transmitter may have additional channels but they are not allow to be used in sanctioned races.

Boats Produced: Several thousand

Class boat builder(s):

Are in the process of selecting new builders. More to come in the future.

Approximately how many boats are in the USA/North America? 1000 +/-

Where is your One-Design class typically sailed in the USA? List regions of the country:

You can generally find a club that sails the Soling 1 Meter in all regions of the USA.

Does this class have a spinnaker or gennaker? No

How many people sail as a crew including the helm?  0

Ideal combined weight of range of crew:  0

Boat Designed in  1980s+/-

Length (feet/inches): 39.375″

Beam: 8.875″

Weight of rigged boat without sails: Minimum weight, ready to sail including batteries is 10lbs.

Mast Height:

Coaching or Clinic Resources

Class rules (pdf doc).

Back to One-Design Central

Copyright ©2018-2024 United States Sailing Association. All rights reserved. US Sailing is a 501(c)3 organization. Website designed & developed by Design Principles, Inc. -->

• For Sale / SMYC History
• Photo Gallery
• Archive's

Sarasota Model Yacht Club

Welcome - About Us

The Sarasota Model Yacht Club got its start in Sarasota in 1996.  Our club sails the American Model Yachting Association-sanctioned one-design Soling One Meter R/C , RC Laser, DF65, DF95 and (during the winter only) IOM model yachts. The club meets six (seven times a week when the IOM sail) times per week for practice and racing. We sail at the  Nathan Benderson Park at  the West Lake on Athletes Drive.   The West Lake is off of Honore at Athletes Drive. 

    The Soling 1-Meter kit-based model is a pleasure to sail. As a one-design, it is an ideal introduction to model yachting, yet it provides a  competitive boat for the best of veterans as well and is available from  “ Boatyard John ” (our club builder). 

    The RCLaser is factory-built ready to sail and available at  intensitysails.com  

We also sail the Dragon Force (DF) DF65 and the DF95 RC boats. 

The DF 65 is one of the fastest growing class of RC sailboats in the U.S. The boat has earned this distinction by being a great one-design sailing boat while being the least expensive ready-to-sail boat on the market. At around $350 for a boat with radio and receiver and about 3 hours of assembly and you're on the water.    

The DF95 is the fastest growing class in the USA and is near Ready-to-Sail in a kit form from  Radiosailing.net  or from “Boatyard John”. 

    All skill levels are welcome, from neophytes to crusty old salts! You will find that our members can be very helpful in getting you involved with this great hobby. Come on out to watch the hard-fought races or join us for practice and racing.  

The Soling One Meter (S1M) :  This S1M the largest class in the U.S. and Florida. We sail Solings Tuesday, Thursday and Saturday. Race Captains rotate throughout the year. Craig Collemer is the Race Captain.

The RC Laser :  This is the largest RC class in the world. We sail Lasers on Friday. Steve Lippincott is the Race Captain.

The DF65 and the DF95 :  These are the newest and fastest-growing restricted one-design class in both Florida and the U.S.  

We sail DF95's on Tuesday, Thursday and Saturday. Bill Hendrickson is the Race Captain. The DF65 fleet sails Monday and Wednesday.  Rob Wucki is the Race Captain. 

IOM The IOM Class is considered a Development Class by the AMYA. 

The International One Metre class is the fastest-growing class in the world. This class is distinct and different in purpose from the US One Meter class, and complements the International Marblehead Class as a simpler, less expensive boat. The International class has a one-design rig, and has minimum weights on the keel and overall, and restricts the hull material. The net effect of these differences is that the typical cost spiral of lighter weight, and more expensive materials and manufacturing processes, is arrested. This allows amateur designers and builders a chance to design and build with little concern that they are building in a disadvantage due to weight. This is a feature not found in any existing AMYA class and is one of the reasons that the class is so popular around the world.  We sail IOM's on Sundays in season.  John Stryhn " Boatyard" is the Race Captain.

Where and when do we race?

 The club races at Benderson Park on the West Lake.  The West Lake is located at the intersection of Honore and Athletes Drive, Sarasota Fl. 

GPS Address:    5700 Athletes Drive, Sarasota FL 34235

Summer Racing Hours* - Starts May 14th :

Monday & Wednesday :    DF65 Fleet                              10am - Noon

Tuesday :                            DF95 Fleet & Soling Fleets   10am - Noon 

Thursday :                           Soling Fleets                          10am - Noon 

Friday :                                RC Laser                                 10am - Noon

Saturday :                           DF95 Fleet & Soling Fleet     10am - Noon

Selected Sundays:             IOM Fleet                                 Noon - 3pm                     

Fall, Winter and Spring Racing Hours* - Starts Nov 1st :

Tuesday & Thursday :        DF95 Fleet & Soling Fleets    1 pm - 3pm

Selected Sundays:             IOM Fleet                                 Noon - 3pm

* RC Sailing is a very weather dependent sport. Daily sailing maybe cancelled at any time.

More About Us

Do we accept beginners.

    YES. We encourage sailors of all skill levels to join us. A Mentor Program is available for beginners. 

How can I get a S1M, RC Laser DF65 or DF95?

    Soling 1M:   We have a member called “Boat Yard” who has used/refurbished S1Ms’ for sale. You can also buy a new ready-to-sail boat from John. John's email [email protected] . 

     RC Laser:   A new RC Laser is available at intensitysails.com  at a cost of less than $600 with 3 complete rigs.

     DF95:  A new DF95 can be purchased from Radiosailing.net in kit form for $345, up to $610, which includes a transmitter and receiver, B rig, B sails, LiPo battery, custom stand and sail numbers for A and B sails.  The boat can also be purchased and assembled by club member  “Boatyard” .  The assembly takes 3-4 hours. 

   DF65:  The Fleet at SMYC is unique in that it caters to those unable to walk long distances while racing due to shorter courses then the other classes. The boat is available at http://radiosailing.net/. The boat can also be purchased and assembled by club member  “Boatyard”

Do we have dues/fees?

Dues are $75/year and a signed liability Waiver for SANCA is required.   SMYC is also a member of the American Model Yachting Association (AMYA).  The AMYA has many resources for Individual members. Their web site is www.theamya.org.

The club's primary contact is Commodore Bill Schmeising,            ( 631) 944-1077 or email [email protected]

For questions regarding this website, please contact Bill Schmeising.

Video Links

Here is a recent Video from the Soling Region 7 Regatta:

https://youtu.be/l0ndNOH5RKE

A link to the Sarasota Magazine Article about SMYC https://www.sarasotamagazine.com/news-and-profiles/2020/03/sarasota-model-yacht-club

In the Sky's video link

https://www.youtube.com/watch?v=1HaXamACM1I

ABC Channel 7 Video with Linda Carlson:

https://www.youtube.com/watch?v=VlZpwkrYIj4

Introductory Video:

https://www.youtube.com/watch?v=cau3RuLsgxg

2024 -2025 SMYC Calendar

Contact smyc, drop us a line.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

American Model Yachting Association

SMYC is a member of the AMYA, the national governing association for RC sailing in the US.

SMYC is club # 204 - Region #7

SMYC members are encouraged to be individual AMYA members.

SMYC sails at:

Nathan benderson park.

Nathan Benderson Park is a nearly 600-acre paradise nestled in the heart of Florida, featuring a 400-acre lake surrounded by breathtaking scenery. This ultimate recreational destination offers a wide range of activities, including world-class rowing events, kayaking, stand-up paddleboarding, fishing, and more.

Copyright © 2024 Sarasota Model Yacht Club - All Rights Reserved.

Powered by GoDaddy Website Builder

Service Locator

• Angler Endorsement
• Boat Towing Coverage
• Mechanical Breakdown
• Insurance Requirements in Mexico
• Agreed Hull Value
• Actual Cash Value
• Liability Only
• Insurance Payment Options
• Claims Information
• Towing Service Agreement
• Membership Plans
• Boat Show Tickets
• BoatUS Boats For Sale
• Membership Payment Options
• Consumer Affairs
• Boat Documentation Requirements
• Installation Instructions
• Shipping & Handling Information
• Contact Boat Lettering
• End User Agreement
• Frequently Asked Questions
• Vessel Documentation
• BoatUS Foundation
• Government Affairs
• Powercruisers
• Buying & Selling Advice
• Maintenance
• Tow Vehicles
• Make & Create
• Makeovers & Refitting
• Accessories
• Electronics
• Skills, Tips, Tools
• Spring Preparation
• Winterization
• Boaters’ Rights
• Environment & Clean Water
• Boat Safety
• Navigational Hazards
• Personal Safety
• Batteries & Onboard Power
• Motors, Engines, Propulsion
• Best Day on the Water
• Books & Movies
• Communication & Etiquette
• Contests & Sweepstakes
• Colleges & Tech Schools
• Food, Drink, Entertainment
• New To Boating
• Travel & Destinations
• Watersports
• Anchors & Anchoring
• Boat Handling
• ← Lifestyle

Entering The World Of Radio-Controlled Sailboat Racing

Advertisement

A weekend boater gets hung out to dry when she joins the enthusiastic fray of Radio Control Sailboat Racing.

The Soling 1M is among 32 classes of remote-controlled sailboats governed by the American Model Yacht ­Association.

I don't know why I'm here. As I stand bundled up on the banks of the Genesee River among my Rochester Yacht Club pals, fingers frozen from snow and sleet, I am suddenly struck by the unfairness of it all. As competitors in the " Soling Series" regattas , we all start with a 1-meter remote-controlled sailboat, a controller, water, and wind. That's where the equality ends.

Most of my Soling buddies are serious sailors, and although I spent earlier years sailing on Lake Michigan, I haven't been at the helm of a sailboat for any length of time in the last 30 years. These sailors live to push both full-sized and meter-long hulls to their utmost. A few of the other club members spend their time on thoroughbred powerboats, zipping past me on Lake Ontario for a day-jaunt to Canada and back, treating it like just another rum run. Both groups are accustomed to speed, whether it be from wind or by means of fossil fuel. Wherever they go, their hair blows behind them in the breeze. I am a tugboat captain. At a top speed that seldom exceeds 6 knots, my hair does not "blow in the breeze.'' It stays perfectly straight. I don't "zip" anywhere.

I get chided, advised, and admonished pertaining to my handling of No. 70, a.k.a. Scout, my Soling craft. I swear I hear chuckles whenever my maneuvers don't match the task my vessel is supposed to perform. Cries of "Starboard, Angie!" ring in my ears as I desperately attempt to keep out of the way whenever I'm actually near other boats. I feel the smirks as I futilely try to keep No. 70 on a straight course when the wind picks up over 15 knots. I try to ignore the sidelong glances when I pull her out to tweak my stays and vang, as they all know I'm just pretending to know how to tune it. Each week I say a prayer to the Soling gods that my boat doesn't have to be fished out of the water by the Crash Boat (our series' version of the Coast Guard) on account of low battery or, God forbid, some type of damage. Each time I finish a race, I wonder if I'll ever claim a win for coming in first, or at least, not last. Scout did notch a first-place win once but, alas, I was not at the helm. Due to an embarrassing low-blood-sugar moment, I felt faint and relinquished my controller to friend Doug, a more capable RC sailor who showed me how to tune and sail Scout. Doug ensured the win, gallantly proving it's me ... not the vessel.

Despite being out of her depth in the world of RC sail racing, the author came away a convert who embraced the camaraderie among competitors.

Nonetheless, for whatever reasons, I have been accepted into this group. It's occurred to me more than once this might be because 1. I am no threat to their quest for a trophy, 2. for political reasons, they hoped a woman would compete, or 3. every sport needs a mascot. Whichever it is, I'm here. Every Sunday. Coming in last. And today, after our boats are stored back in our vehicles, after we make our way to the RYC Burgee Bar to regale the tales of the day's shenanigans, and I take my first sip of Mount Gay and Coke, it hits me. It's the camaraderie that exists with all of us — winners, runners-up, and losers alike. I am included in the bantering and feel a kinship that comes with sharing a common love of a sport that requires thumb reflexes, patience and, at times, considerable layers of warm clothing. We meet, we race, we celebrate. This is why we come. Now I know why I am here.

Related Articles

The truth about ceramic coatings for boats.

Our editor investigates the marketing claims of consumer-grade ceramic coatings.

Fine-Tune Your Side Scan Fishfinder

Take your side-scanning fishfinder off auto mode, and you’ll be spotting your prey from afar in no time

DIY Boat Foam Decking

Closed-cell foam flooring helps make boating more comfortable. Here’s how to install it on your vessel

Click to explore related articles

Angie Killips

Contributor, BoatUS Magazine

Angie Killips lives in the Rochester, New York, area and can often be found piloting her 26-foot Nordic Tug Julius along the southern shore of Lake Ontario.

BoatUS Magazine Is A Benefit Of BoatUS Membership

Membership Benefits Include:

Subscription to the print version of BoatUS Magazine

4% back on purchases from West Marine stores or online at WestMarine.com

Discounts on fuel, transient slips, repairs and more at over 1,200 businesses

Deals on cruises, charters, car rentals, hotel stays and more…

All for only $25/year!

We use cookies to enhance your visit to our website and to improve your experience. By continuing to use our website, you’re agreeing to our cookie policy.

SOLING ONE METER Class Website  

     .

POND LOCATIONS

Where Soling One Meter boats are sailed

Listed by State

THE SOLING ONE METER CLASS & CLASS RULES

The soling one meter class.

The Soling One Meter is a kit-based one-design class scale-model boat based on the former Olympic-class keelboat of the same name. All hulls, decks, keels, and rudders are produced by a single manufacturer. This uniformity makes the Soling One Meter a one design class. One of the major goals of a one design class is to make all boats as equal as possible so who wins the race is based more on the ability of the skipper rather than on the boat itself.

Soling One Meter Class Rules

The Soling One Meter class is managed by the AMYA Soling One Meter Class Secretary and an appointed Class Advisory Committee.

• Classifieds
• Remember Me Forgot Password?
•   Classifieds RC Boats (FS/W) For Sale Soling One Meter Sailboat

• Electric Flight
• Advertising
• Our Sponsors
• Review Policies
• Terms of Service
• Privacy Policy
• Site History
• Mark Forums Read
• Member Search
• Upcoming Articles
• Do Not Sell My Data
• Manage Consent
• Back to Top

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Soling 50 (RC Model)

Soling 50 (RC Model) is a 4 ′ 2 ″ / 1.3 m monohull sailboat designed by John & Laurie Converse/J. Lange and built by Vortex Model Engineering (USA) starting in 1970.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

The SOLING 50 is sanctioned by the national American Model Yacht Association and has active fleets racing in California, Florida, Michigan and Texas.

Current builders (2012): Ludwig Mfg., Universal City, TX (http://www.ludwigrcyachts.com) GRP Model Yachts, Freedom, CA (http://modelyachting.com/) Hartman Model Boats, Bergen, NY (http://www.hartmanmodelboats.com/)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Search Search Search …
• Search Search …

Almost-Ready Race Kits

Purchase a 3DRC Kit

Built with precision, 3DRC kits are almost race-ready

Soling 1 Meter R/C Model Yacht

Keel ballasting kit—option add. The 3DRC Boats’s Soling 1 Meter kit is designed for model sailors of all skill levels. Plastic parts are manufactured using all NEW precision, CAD-designed, state-of-the-art molds, and advanced thermoplastic manufacturing.The 3DRC Boats’s Soling 1 Meter Kit comes as a pre-built plastic hull, with deck and transom installed, and 3D-printed interior keel and rudder assembly glued in place. A resin one-piece rudder with stainless shaft. The bolt-on keel comes assembled and aligned, ready for ballast.

Contact Us to Inquire

AMYA Boat Classes

• Soling 1 Meter Sails
• Dragon Force 65
• Dragon Flite 95
• Sail Numbers
• Used / Discounted Inventory
• All Products
• About the Sailmaker
• Regatta Results
• Gift Certificates

Windjammin Sails are 100% legal racing sails for the Soling 1 Meter. They are made of a single-panel Dacron and cut to comply with the Soling One Meter Sail Control Drawing. However, WJ Sails has taken these plain white sails one step further by printing the illusion that these sails incorporate the hottest revolution in sailmaking - membrane technology just like the high tech America's Cup Yachts and Volvo Ocean Racers.

All Windjammin Soling 1M Sails include

• Reinforced starburst corners which distribute the stretch and load better yielding a smoother longer lasting sail.
• Battens which help hold the leech and keeps the sail area outside the pull line supported
• Tell Tales in Florescent Green and Yellow, 2 pair on the jib, 1 pair on the main and 2 on main leech
• Soling Symbol both sides of the sail
• Luff wire installed in jib
• Sail Numbers included on the main.... jib are extra.

Thank you for choosing Windjammin Sails for your sailing needs.Due to the high volume of orders and the careful craftsmanship involved in each sail, the current lead time for new sails is about 88 days . This means that your order is expected to arrive sometime just before 8/17/2024 . I understand that this is a long wait and I greatly apologize for this long lead time. I have a full time job at The Sailors' Tailor and a family to take care of, so I am limited to making sails in my spare time. Due to the high demand for my sails, I have a lot of orders to fulfill and a limited amount of time to do so. I hope you can appreciate the quality and craftsmanship of my work, and I assure you that I am doing my best to deliver your sail as soon as possible. If you are in a bind, and need your sails ASAP... then I do offer a RUSH Service to get your sails shipped in 10 days or less - fees applies Click here to add Rush Delivery to your order.

Membrane Technology is where sails are created over full-sized 3-dimensional molds by sandwiching a scrim cloth and a yarn layout between two thin Mylar films, then heat fusing everything to make a single cloth-like sail. The sails have fibers running up the leech, and tack fibers radiate out to the leech and many fibers from the clew radiate to points along the luff creating an interlocking structural grid that stretches less for its weight, holds its shape over a wider wind range, and retains its designed shape longer. This membrane technology has dominated sailboat racing worldwide. Membrane sails were used exclusively by the America's Cup and every team racing in both the 2002-2003 and 2005-2006 Volvo Ocean Race.

Over the past 14 years, WJ Sails has been looking for some way to print on Dacron. Because of the slippery coated finish Dacron has, nothing wanted to adhere to the surface. Graphic for the big cruising boats are currently printed and then cured under 800 degrees of heat. Problem with this process is the cloth shrinks around 8%, and not proportionately making it impossible to get a perfectly legal - lined up sail when done. Just recently WJ Sails found a process which does the job without heat and applies the ink just like a giant inkjet printer, but uses a special UV light to cure it.

So, WJ Sails took lots of pictures of different scrim mylars for the background, then drew to scale all the thread lines coming out of each corner of the sails, overlay some graphics, and after about 30 hours of design work, now have a very realistic 3DL America's Cup Volvo Ocean Racer looking Sail for the Soling 1M.

For Sale: Soling 1 Meter Sailboat – Features, Price, and Performance

• By - Kyle Hilson
• Posted on November 14, 2023 November 15, 2023
• Posted in RC Boats

The Soling 1 meter sailboat is a popular sailboat in the sailing community that’s now up for sale. With a design that emphasizes compactness and durability, this sailboat is perfect for a range of sailing conditions and locations. The Soling 1 meter sailboat is constructed with the highest quality materials, which ensures its longevity. Its compact design makes it easy to transport, maneuver, and store in various sailing locations. For those who love sailing, the Soling 1 meter sailboat is a great investment and provides an unparalleled sailing experience.

Versatile and efficient: the Soling 1 meter sailboat.

The Soling 1 meter sailboat is a popular choice for sailing enthusiasts looking for a versatile and efficient sailboat. Its design features a v-shaped bow that ensures it moves smoothly through the water, providing excellent balance and stability. The sailboat’s sails can be adjusted to adapt to various wind conditions, allowing for a more customizable sailing experience.

The Soling 1 meter sailboat’s rigging system is simple yet efficient, improving its aerodynamics and making it easier to control. The sailboat is moderately sized, making it an ideal choice for both leisurely cruising and competitive racing events. Whether you’re a beginner or an experienced sailor, the Soling 1 meter sailboat is a great option.

What are some options for purchasing a Soling 1 meter sailboat?

Some options for purchasing a Soling 1 meter sailboat include buying a new boat from a manufacturer or dealer, purchasing a used boat from websites such as eBay or Craigslist, or searching for local sailing clubs or enthusiasts who may be selling a boat.

Sailboat Prices in a Nutshell

The Soling 1 meter sailboat is a popular choice for sailing enthusiasts looking for a quality sailboat. If you are considering buying a Soling 1 meter sailboat, it is important to know the available prices and options .

New Soling 1 meter sailboats can be purchased for around $900-$1200 . You can also buy second-hand sailboats for as low as $500-$800 . Always inspect used boats thoroughly to make sure they are in good condition.

If you are in the market for a new Soling 1 meter sailboat, you can check out solingonemetre.com, modelyachtgroup.com, or even major retailers like Amazon.

Where can I buy a new or used Soling 1 meter sailboat?

You can buy a new or used Soling 1 meter sailboat online or at boating stores.

Fair and Competitive Racing with Soling 1 Meter Sailboats

• The Soling 1 meter sailboat performs well in various sailing conditions.
• It is rated as a “ One-Design ” sailboat by the International Radio Sailing Association (IRSA) which means all sailboats competing in a race must have identical design and dimensions.
• The sailboat is suitable for both beginner and experienced sailors due to its stability and maneuverability.
• Some sailing clubs and associations that hold races or events for Soling 1 meter sailboats include the Soling One Meter National Class Association and the American Model Yachting Association .

Note: “ One-Design ” sailboats are considered fair and competitive for racing as all sailboats have the same design and conditions, ensuring no one person has an advantage over another.

What organizations hold races or events for Soling 1 meter sailboats?

Some organizations that hold races or events for Soling 1 meter sailboats include the International Soling Association, the American Model Yachting Association, and various local and regional yacht clubs.

Maintenance and care tips for your Soling 1 meter sailboat.

• The Soling 1 meter sailboat requires regular maintenance to ensure it stays in top condition.
• Cleaning the sailboat after each use with freshwater and mild soap is recommended to prevent any build-up of dirt or salt which can damage the boat’s materials.
• It is important to dry the sailboat after each use to prevent any mildew or mold development.
• Checking and tightening any loose screws or rigging is necessary to ensure the sailboat is safe to use.
• Replacement parts for the Soling 1 meter sailboat can be found online on websites such as Amazon or through authorized dealers of the sailboat.

Looking for a Soling 1 meter sailboat for sale ? Check out RC North for a great selection of new and used sailboats. Our sailboats are of the highest quality and are sold at competitive prices.

Where can I find replacement parts for my Soling 1 meter sailboat?

You can find replacement parts for your Soling 1 meter sailboat from various online retailers and manufacturer websites.

Sailboat praised for stability, ease of operation, and suitability for racing.

• Owners of the Soling 1 meter sailboat have generally positive feedback on its performance and design .
• The sailboat has been praised for its stability and ease of operation , making it a suitable choice for both beginners and experienced sailors.
• Some owners have noted that the sailboat could benefit from additional rigging for better performance in stronger winds.
• Sailing experts have also noted the sailboat’s suitability for racing , with some organizations hosting Soling 1 meter races .
• Overall, the Soling 1 meter sailboat has received a warm reception in the sailing community with satisfied owners and positive reviews.

Looking to purchase a Soling 1 meter sailboat? Check out available options available on boats.com or ebay.

Is the Soling 1 meter sailboat suitable for racing?

Yes, the Soling 1 meter sailboat is suitable for racing.

In conclusion, the Soling 1 meter sailboat is a popular choice for both beginner and experienced sailors. With a compact design and sturdy construction, this sailboat offers stability and ease of operation in various sailing conditions. While the sailboat may require some additional rigging for optimal performance in stronger winds, it has generally been well-received in the sailing community. Positive feedback from owners and favorable reviews from sailing experts attest to the sailboat’s quality and reliability. If you are interested in purchasing a Soling 1 meter sailboat, check out reputable sailing retailers or the manufacturer’s website for availability and pricing information. Whether for leisurely sailing or racing, the Soling 1 meter sailboat is a great option for anyone seeking a reliable and enjoyable sailing experience.

Previous Article

Next article.

       Custom Vinyl for your Boat

Pick one of ours or design your own , elevate your rc sailboat's style with custom graphic design vinyl skins.

  Introduction:   If you're passionate about radio-controlled sailboats, you know that the thrill of sailing isn't just about the performance; it's also about making a statement on the water. That's where custom graphic design vinyl skins come into play. These high-quality, customizable skins allow you to transform your RC sailboat into a unique work of art, showcasing your style and personality while enhancing its performance. In this guide, we'll explore the world of graphic design vinyl skins for RC sailboats and how they can take your hobby to the next level.

  The Art of Graphic Design Vinyl Skins

                                                rc sailboats as canvases :  .

                                                                                                Your radio-controlled sailboat is more than just a hull; it's a canvas waiting for artistic expression.                                                                                                               Graphic design vinyl skins offer you the opportunity to personalize your boat in ways you never                                                                                                                thought possible. Whether you prefer classic elegance, bold and modern designs, or something                                                                                                               entirely unique, the world of vinyl skins has endless possibilities.

                                                                                                Quality and Durability :                                                                                                Vinyl skins are made from high-quality materials that not only look fantastic but also offer protection to               your boat. These skins are de signed to withstand the rigors of sailing, including exposure to water, sun, and wind. They're UV-resistant,                              waterproof, and won't fade, ensuring that your design stays vibrant season after season.

The Benefits of Vinyl Skins

​   enhanced aesthetics:.

   A beautifully designed vinyl skin can instantly elevate the appearance of your RC sailboat. Whether you want a realistic wood grain finish, a sleek            metallic look, or a full-color     custom graphic, vinyl skins provide a stunning visual transformation.

    Easy Application and Removal:

    Applying vinyl skins is a straightforward process that doesn't require any special tools or skills. They adhere firmly to your sailboat's surface but can      be removed without leaving residue or damaging the underlying paint or finish. This means you can change your boat's look as often as you like.

      Personalization and Identity:

     Your RC sailboat is an extension of your personality. With vinyl skins, you can reflect your style and identity on the water. Whether you're racing or leisurely sailing, your boat will stand out from the rest and be a true representation of your passion.

   Customization Options

​         Design Themes:         Choose from a wide range of design themes to suit your preferences. From nautical motifs like waves and compass roses to abstract art and                   custom graphics, the possibilities are endless. If you have a specific design in mind, we offer custom printing services, allowing you to bring your              vision to life.

        Color Palette:          Select from an array of vibrant colors and finishes to create the perfect look for your sailboat. Matte, gloss, metallic, and textured options are                    available, allowing you to tailor the finish to your liking.

         Size and Fit:           Vinyl skins can be tailored to fit your specific RC sailboat model, ensuring a seamless and professional appearance. Detailed templates are                      often provided to guarantee a precise fit.

         Conclusion:            Graphic design vinyl skins offer RC sailboat enthusiasts a fantastic opportunity to combine artistry with their passion for sailing. These                                customizable skins provide enhanced aesthetics, protection, and a unique identity on the water. With an array of design options and the

         flexibility to change your boat's look at any time, vinyl skins are a must-have accessory for any RC sailor looking to make a splash in style. So, set             sail with confidence and express yourself through the art of vinyl skins!