cutter rigged catamaran

• Find A School
• Certifications
• North U Sail Trim
• Inside Sailing with Peter Isler
• Docking Made Easy
• Study Quizzes
• Bite-sized Lessons
• Fun Quizzes
• Sailing Challenge

What’s in a Rig? The Cutter Rig

By: Pat Reynolds Sailboat Rigs , Sailboats

What’s in a Rig Series #2

A variation on the last installment of What’s in a Rig (the sloop) is the Cutter Rig. Although it has gone through some changes through the course of history, the modern cutter rig is generally a set-up with two headsails. The forward sail is called the yankee and the one slightly behind it is the staysail.

Cutter rigs are a choice a cruising sailor might opt for more offshore work. Since longer passages usually means encountering heavier weather, the cutter rig can be the perfect choice to have a ready-to-go balanced sailplan when the wind picks up. They are not quite as easy to tack as sloops, but since cruisers go for days without tacking, the ability to quickly furl the yankee and have a small staysail up in a stiff breeze is worth the sacrifice.

Cutter rig fans also enjoy the balance it provides. A small staysail set farther back on the boat and a reefed main is a very solid arrangement on a windy day and for cruisers who want to be comfortable in 25-knots, this is important. Also, a staysail makes heaving-to easier – this is a task far more utilized by the cruising sailor.

So, there you have it – the cutter rig is a set-up preferred by sailors on a voyage. They have disadvantages in how they tack but strengths in how they behave in open-ocean conditions.

What's in a Rig Series:

Related Posts:

• Learn To Sail
• Mobile Apps
• Online Courses
• Upcoming Courses
• Sailor Resources
• ASA Log Book
• Bite Sized Lessons
• Knots Made Easy
• Catamaran Challenge
• Sailing Vacations
• Sailing Cruises
• Charter Resources
• International Proficiency Certificate
• Find A Charter
• All Articles
• Sailing Tips
• Sailing Terms
• Destinations
• Environmental
• Initiatives
• Instructor Resources
• Become An Instructor
• Become An ASA School
• Member / Instructor Login
• Affiliate Login

My Cruiser Life Magazine

Cutter Rigged Sailboats [GUIDE] Advantages, Sailing, Options & Features

Cutter rigs are often more prevalent in boating magazines and theory than they are in your marina. Most cruising sailboats are Bermuda rigged sloops with just one permanently attached headsail. So, are two headsails better than one? Or, are they double the trouble?

Table of Contents

• History of Cutters 

What is a Cutter Rig?

Cutter features, cutter rig options, sailing a cutter rigged sailboat, 5 popular manufacturers making cutter rigs, it takes two to tango, cutter rigged sailboat faqs.

History of Cutters

Cutters became popular in the early 18th century. These traditional cutters were decked (instead of open) and featured multiple headsails. Smugglers used cutters to smuggle goods, and the coast guard used cutters to try to catch the smugglers. 

Various navies also used the cutter rig. Navy cutters featured excellent maneuverability and were better at sailing to windward than square-rigged ships. 

Navies used cutters for coastal patrol, collecting customs duties, and “cutting out” raids. These “cutting out” operations consisted of a boarding attack. Fast, maneuverable cutters could stealthily approach an enemy vessel and board it. This type of attack was common in the late 18th century. 

US Coast Guard ships, now powerful, fast, engine-driven, steel vessels, are still called cutters today as a nod to their past.

A cutter rig sailboat has two headsails instead of just one. The jib is located forward and is either attached to a bowsprit or the bow. The inner sail is called the staysail and is attached to an inner forestay. 

Traditional cutters were built for speed. Today, cutter rigged sailboats are popular with ocean-crossing sailors, cruisers, and sailors looking for an easy to manage, versatile rig for all conditions.

It’s important to distinguish cutters from other types of boats with a single mast. Cutters regularly fly two headsails on nearly every point of sail. Many sloops are equipped to fly different-sized headsails, but it is unusual or unnecessary for them to fly more than one at a time.

Solent Rig vs Cutter Rig

A solent rig is traditionally called a slutter–a little bit sloop and a little bit cutter. This configuration features two large headsails mounted close together. The solent rig is good if you do a lot of downwind sailing. You can pole out both headsails and go wing-on-wing, with one headsail on the starboard side and one on the port side. 

If you are on any other point of sail, you can only use one solent rig headsail at a time. If you use the inner sail, the wind flow is disrupted by the furled forward sail. And, if you use the forward sail, you’ll have to furl it to tack because there’s not enough space between the forestays.

The solent rig is a way to add more sail options to a standard sloop. Most solent stays are not required rigging to keep the mast up, so owners remove them when not in use to make tacking the primary headsail easier. 

Advantages of a Cutter Rig

There are a lot of reasons to like a cutter. A cutter rigged boat has redundant rigging and spreads the sail load across its rigging. And a cutter rig offers increased sail options–it offers increased sail area in light winds and easy and efficient ways to decrease sail area in heavy weather. 

In heavy weather, a cutter will drop or furl her larger headsail – usually a yankee or a genoa. That leaves just the smaller inner staysail. This arrangement is superior to the standard sloop, which sails in high winds by reefing her headsail. The staysail, however, lowers the center of effort on the sail plan and maintains draft over the reefed mainsail. That makes the boat more stable, maintains performance, and reduces stresses on the rig. 

If you imagine the sailor going to sea and needing to reef, it’s easy to see how many more choices they have than the sloop sailor. While each sailor can reef their mainsail, a cutter skipper has full control over both headsails as well. 

Because a cutter rig spreads the load across two headsails, it’s easier to manage. There might be more sails, but each sail is smaller and has smaller loads on it. That makes cutters the preferred option for sailing offshore when short-handed, as are more cruising couples. 

Lastly, it has to be added that there’s something appealing about the traditional looks of a cutter. 

Disadvantages of a Cutter Rig

While there are many benefits of a cutter, there are drawbacks and disadvantages too. 

Sailors will have more lines to manage and more processes to think through. More sails mean more halyards and sheets. And when it comes to maintenance and upkeep, a cutter will have more standing and running rigging to replace, along with one more sail. 

Cutters are also harder to tack. You’ll be dealing with two headsails instead of just one. Many designs deal with this problem by making the staysail self-tacking. This has fallen out of favor, but it’s a great advantage if you find yourself short-tacking up or down rivers.

Regardless of whether you need to tack both headsails or not, getting the larger sail to tack through the slot and around the inner forestay is sometimes a challenge. Many skippers find themselves furling the headsail, at least partially, to complete the tack. 

Cutters need extra foretriangle room, which can mean adding a bowsprit, moving the mast back, or both. 

Cutter Rig Position

Looking at a cutter rigged sailboat diagram, you might see a bowsprit depicted. Often, cutters fly their yankee from a bowsprit. Bowsprits allow boat designers to increase the fore triangle’s size without making the mast taller. Other cutters don’t use a bowsprit and mount the yankee sail on the bow. 

A cutter sailboat might seem like more work. After all, there are two sails to trim and manage. In addition, you’ll have to perform maintenance on two sails and purchase and maintain double the hardware. 

However, the two headsail arrangement can be easier to manage when the sails are under load. Instead of having one jib or genoa to trim, the weight and pressure are spread across two sails. 

Mast Location

Today’s modern boat designers often focus on providing living space in the cabin. Designers often move the mast forward to create a larger, more open saloon. When the mast is forward, there’s less space to mount two headsails. A cutter sailboat needs a decent foretriangle area. 

A cutter rigged sailboat is also more expensive for boat builders. The deck must be strong enough to handle the inner forestay’s loads. Between the additional building costs, saloon design issues, and customers’ concern over increased complexity, boat builders often favor a single headsail. 

Easier on the Boat and Crew

Since the loads are distributed between two smaller sails instead of being handled by one large genoa. This means there’s less pressure on attachments points and hardware, and therefore less wear and tear. In addition, because there are separate attachment points on the deck for each sail, the load is distributed across the deck instead of focused on one spot. 

Because each headsail is smaller, the sails are easier to winch in, so the crew will find it easier to manage the sails.

There’s nothing cookie-cutter about a sailing cutter. From the cut of the jib to the configuration of the staysail, each cutter sailboat is unique. 

Yankee, Jib, or Genoa

Traditional cutters have a yankee cut headsail along with a staysail. The yankee is high-cut and usually has no overlap. The high cut improves visibility, and a yankee has less twist than a typical jib. By sloop standards, it looks very small, but on a cutter it works in unison with the staysail. 

A jib is a regular headsail that does not overlap the mast, while a genoa is a big jib that does overlaps. The amount of overlap is measured in percentage, so a 100-percent working jib fills the foretriangle perfectly. Other options include the 135 and 155-percent genoas, which are popular for sailors in light winds. 

The problem with using a big jib or genoa with a staysail is that there will often be a close overlap between the two headsails. If flown together, the air over the staysail interferes with the air over the outer sail, making each one slightly less efficient. In these cases, it’s often better to drop the staysail and leave it for when the wind pipes up. 

Roller Furler, Club, or Hank-On Sails

Sailors have many options to manage and store their cutter’s sails. Sailors can mix and match the options that work for them. 

Roller Furler vs Hank-on Sails

You can have both sails on roller furlers, both hanked on, or a mix of the two. 

Buying and maintaining two roller furlers is expensive, but it makes the sails easy to manage. You can easily unfurl, reef, and furl both headsails from the cockpit without having to work on the deck. 

Hank-on sails are fool-proof and offer less expense and maintenance. You can use a hank-on staysail, either loose-footed or club-footed, depending on your needs. Hank-on sails make sail changes easy and they never jam or come unfurled unexpectedly. 

The most common setup on most cutters is to have the larger yankee or jib on a furler, and the smaller and more manageable staysail hanked on.

Club-footed Staysail

A club-footed staysail is attached to a self-tacking boom. Since there is only one control sheet to handle, there’s a lot less work to do to tack from the cockpit. It tacks just like another mainsail. You can tack the yankee while the club-footed staysail self-tacks. 

Island Packets and many other cutters feature this arrangement, which makes tacking easy. 

However, a club-footed staysail takes up space on the foredeck–it’s always in the way. It’s harder to get to your windlass and ground tackle. In addition, it’s harder to store your dinghy on the foredeck under the staysail boom. The boom also presents a risk to anyone on the foredeck, since it can swing during tacks and jibes and is even lower to the deck than the mainsail boom.

Loose-footed Staysail

Keeping a loose-footed staysail on a furler clears space on the deck. Without the boom, you can more easily move around the foredeck, and you’ll have more space when you are managing the anchor. In addition, you can more easily store your dinghy on the foredeck. 

However, the staysail loses its self-tacking ability. You’ll now have to have staysail tracks for the sheet’s turning blocks and another set of sheet winches in the cockpit. When it comes time to tack the boat, you’ll have two headsails with four sheets and four winches to handle. Most owners choose to furl the outer headsail before the tack. Then, they can perform the maneuver using the staysail alone.

The good news is that most offshore boats are not tacking very often. If you’re on a multi-day passage, chances are you’ll only tack once or twice on the whole trip.

Downwind and Light Air Sails

There are a number of light air sails that will help your cutter perform better when the wind is light. Popular options include the code zero, gennaker, and asymmetrical spinnaker. 

Adding one of these sails to your inventory can make it a dream sailing machine. A code zero can be flown in light air. Since the cutter is already well equipped for sailing in heavy air, a light air sail really gives you the ability to tackle anything.

Sloop Rig, Ketch, and Yawl

While some describe a cutter as a cutter-rigged sloop or a sloop cutter, a modern sloop has one mast and one permanent headsail. 

But you’ll also find the cutter rig used on a ketch or a yawl. A cutter ketch or yawl offers a cruising sailor increased sail area and choices by adding the mizzen mast and sail behind. 

Sailing a cutter rigged boat is not that different from sailing a traditional sloop. Sailors will have to pay close attention to trim and tacking. 

Sailing a Cutter Rig to Windward

A cutter usually can’t point as high as a sloop when sailing to windward. The yankee hinders the staysail’s airflow, and the staysail starts to stall. 

Tacking a Sailboat Cutter

If you need to short tack up a narrow channel, and both your sails are loose-footed, you can roll up one of the headsails and just use one headsail to tack. Many staysails have a boom and are self-tacking. This means you can tack the yankee, and the staysail will take care of itself. 

Reefing a Cutter

A cutter sailboat has more options to easily get the right amount of sail. You can add a reef to your mainsail, then furl or reef the yankee a little, and then add another reef to the mainsail. As the wind increases, you can take the yankee in all together, and sail with a double-reefed mainsail and the staysail. Finally, you can add the third reef to the mainsail. Some staysails can be reefed, too.  

A cutter rig offers many options during heavy weather. For example, you may end up taking the mainsail down altogether and leaving the staysail up. Or, you might choose to replace the staysail with a tiny storm sail. 

Adding a storm jib on a sail cutter is much easier than a standard sloop. On a sloop, you’d have to remove the large genoa from the bow and then add the storm sail. This operation places the skipper in a challenging situation, which can be avoided on a cutter. 

On a cutter, you can remove the staysail and add the storm jib to the inner forestay. Working a little aft of the bow will give you increased stability while managing the staysail’s smaller load.  

While many modern sailboats are sloop-rigged, cutter-seeking sailors still have options. 

Rustler Yachts

While many new yachts have ditched the sturdy offshore cutter rig in favor of greater simplicity, Rustler is making a name for themselves by bringing it back. It’s still one of the best options for offshore sailing, and it’s great to see a modern yacht company using the rig to its full potential. 

The Rustler doesn’t need a bowsprit to accommodate its cutter rig. The Rustler is set up for single-handed and offshore cruising with all lines managed from the cockpit. Their smaller boats are rigged as easier-to-sail sloops for coastal hops, while the larger 42, 44, and 57 are rigged as true cutters with staysails and yankees.

Cabo Rico Cutters

Cabo Rico built cutters between 34 and 56 feet long. They aren’t currently in production but often come up on the used boat market. They are beautiful, semi-custom yachts that turn heads where ever they go. Of all the cutters the company built, the William Crealock-designed Cabo Rico 38 was the most long-lived, with about 200 hulls built. The second most popular design was the 34. The company also built a 42, 45, 47, and 56—but only a handful of each of these custom beauties ever left the factory. Most of the larger Cabo Ricos were designed by Chuck Paine.

Cabo Ricos have bowsprits, and the staysail is usually club-footed, although owners may have modified this. Cabo Ricos are known for their solid construction, beautiful teak interiors, and offshore capabilities. 

View this post on Instagram A post shared by Hold Fast Sailing (@sparrowsailing)

Pacific Seacraft

Pacific Seacraft features a full line of cutters. Pacific Seacraft boats are known for their construction, durability, and overall quality.

Just a few of the best-known cutters built by Pacific Seacraft include the following.

• Pacific Seacraft/Crealock 34
• Pacific Seacraft/Crealock 37
• Pacific Seacraft 40

View this post on Instagram A post shared by Jeffersön Asbury (@skipper.jeff)

Island Packet Yachts

Island Packet boats are probably the most popular cutter design available today. Designer and company founder Bob Johnson created beautiful cutter-rigged full-keel boats with shallow drafts that were very popular around Florida, the Bahamas, and the east coast of the US.  

Island Packets are known for their comfortable, spacious layouts. Older models could be ordered from the factory as either sloop or cutter-rigged. The result is that you see a mix of the two, as well as plenty of cutters that have removed their staysails to make a quasi-sloop. 

Island Packet is still in business today, but now favors solent-rigged sloops with twin headsails. 

View this post on Instagram A post shared by SV Miette (@sv_miette)

Hess-Designed Cutters

Lyle Hess designed several famous cutter-rigged boats, including the Falmouth Cutter 22 and the Bristol Channel Cutter 28. These gorgeous boats are smaller than most cruising boats but are a joy to sail. Lyle Hess’ designs were popularized by sailing legends Lin and Larry Pardey, who sailed their small wood-built cutters Serraffyn and Taleisin around the world multiple times.

These beautiful cutters have a timeless look like no other boats. They have inspired many other designs, too. You’ll find them built from both wood or fiberglass, but a variety of builders and yards have made them over the years.

View this post on Instagram A post shared by Professional photographer (@gary.felton)

Cutter rigged boats offer cruising sailors a flexible sail plan that’s perfect for offshore sailing. Sailors can adjust the amount of sail according to the current wind conditions. Traditional cutters were known for being fast and agile, and today’s cutters carry on the tradition with pride. 

What is a cutter rigged yacht?

A cutter rigged yacht features two headsails. One headsail, usually a high-cut yankee, is all the way forward, either on a bowsprit or the bow. The staysail is smaller and attached to an inner forestay.

What is the advantage of a cutter rig?

A cutter rig offers cruising sailors more flexibility. They can easily increase and decrease the sail area and choose the optimum combination for the sailing conditions. While there are more lines and sails to handle, each sail is smaller and therefore easier to manage.

Matt has been boating around Florida for over 25 years in everything from small powerboats to large cruising catamarans. He currently lives aboard a 38-foot Cabo Rico sailboat with his wife Lucy and adventure dog Chelsea. Together, they cruise between winters in The Bahamas and summers in the Chesapeake Bay.

Leave a comment

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Types of Sailboats
• Parts of a Sailboat
• Cruising Boats
• Small Sailboats
• Design Basics
• Sailboats under 30'
• Sailboats 30'-35
• Sailboats 35'-40'
• Sailboats 40'-45'
• Sailboats 45'-50'
• Sailboats 50'-55'
• Sailboats over 55'
• Masts & Spars
• Knots, Bends & Hitches
• The 12v Energy Equation
• Electronics & Instrumentation
• Build Your Own Boat
• Buying a Used Boat
• Choosing Accessories
• Living on a Boat
• Cruising Offshore
• Sailing in the Caribbean
• Anchoring Skills
• Sailing Authors & Their Writings
• Mary's Journal
• Nautical Terms
• Cruising Sailboats for Sale
• List your Boat for Sale Here!
• Used Sailing Equipment for Sale
• Sell Your Unwanted Gear
• Sailing eBooks: Download them here!
• Your Sailboats
• Your Sailing Stories
• Your Fishing Stories
• Advertising
• What's New?
• Chartering a Sailboat
• Cutter Rig Sailboat

Why the Cutter Rig Sailboat Is My First Choice for Cruising

The cutter rig sailboat has two jibs, the foremost one usually a high-cut yankee set on the forestay and the other a staysail set on an inner forestay. It's a flexible, easy to handle rig, which is why I - along with a lot of other cruising sailors - am such a fan of it.

Admittedly a cutter rigged sailboat is not quite as efficient to windward as a sloop rigged version, but its other benefits outweigh this small mark against it.

Often both foresails are on furling gears, but I prefer to have a furling gear on the forestay only so that I can get rid of the hanked-on staysail and replace it with a hanked-on storm jib if I need to.

The inner forestay (or cutter stay) exerts a forward load on the mast which has to be resisted. This usually achieved by either aft-intermediate stays or running backstays.

Types of Cutter Rig Sailboats

There are two variants of the cutter rig:~

One where the yankee is set on a bowsprit and the staysail attached to the bow.

This arrangement is normally found on heavy displacement sailboats , as a way of increasing the size of the fore triangle without having to extend the height of the mast.

No Bowsprit

The other where the whole rig is contained inboard, with no bowsprit like the sailboat on the right.

You'll find cutter rigs on sloops , ketches and yawls too.

Examples of these are shown below:~

Tacking a Cutter Rig Sailboat

This is slightly more complicated than with a sloop as you've got two headsails and an extra pair of sheets to deal with when going about. Here's how we do it on Alacazam :~

• centralise the mainsheet on its track;
• put the helm over and release the yankee sheet as she goes through the wind;
• let go the working runner and set the other one;
• let go the staysail sheet and haul in on the working yankee sheet;
• haul in on the the staysail sheet;
• trim the yankee until the telltales are flying nicely, then do the same with the staysail and finally the main.

Many staysails are set on a self-tacking boom, which means that going-about is simplicity itself. However, unless you do a lot of short-tacking with both headsails set, this benefit is outweighed by the additional hardware. In my view, that is!

The staysail boom may well mean that you won't be able to stow your upturned dinghy on the foredeck. Not that this is an issue in Harmonium's case as she carries her dinghy in davits.

Reducing Sail on a Cutter Rig Sailboat

Reefing a cutter in deteriorating conditions usually goes like this:~

• put first reef in the mainsail, then;
• put a few rolls in the yankee;
• put second reef in the mainsail;
• furl the yankee completely;
• put third reef in the mainsail.

This will leave you with a deep reefed mainsail and a staysail set on the inner forestay, which should serve you well right up to full gale conditions. It's storm jib and trysail territory after that.

Off The Wind with a Cutter Rig Sailboat

On a reach you'll find it very easy to balance your sailboat perfectly with a cutter rig, such that the windvane self-steering gear will have no difficulty in keeping her on course.

But when the wind drops and falls well aft of the beam the staysail (now blanketed by the mainsail) starts to flap and disturbs any airflow into the yankee, you're effectively sailing under mainsail alone.

With a sloop you'd probably pole the genoa out to windward in these conditions and sail wing-and-wing.

This isn't an option with the cutter rig as you'd be under-canvassed with just a yankee set on the forestay - you'll need a spinnaker, a prospect that doesn't fill some sailboat cruisers' hearts with joy.

On Alacazam we just drop both sails and hoist our colourful asymmetric spinnaker, which is a classy name for a cruising chute.

Alternatively you could turn your cutter into a slutter...

The Slutter Rig

Slutter isn't a formal term - it sounds a bit derogatory - but most cruising sailors will know what's meant by it.

It's so called because it's a combination of a sloop rig and a cutter rig, the crucial difference being that a furling genoa is set on the forestay in place of the yankee, but no staysail is set (initially) on the inner forestay.

This is a sloop rig at this point, so windward ability isn't compromised at all, and the genoa can be poled out when sailing downwind.

The inner forestay is likely to prevent the genoa blowing through smoothly when you go about, so it's best to roll it in a few turns before you go through the wind.

Reducing Sail on a Slutter

Reefing a slutter in deteriorating conditions might go like this:~

• roll a few turns in the genoa
• roll a few more turns in the genoa
• first reef in the mainsail
• second reef in the mainsail.
• furl the genoa completely and hoist the staysail
• third reef in the mainsail.

As with the conventional cutter you've now got a deeply reefed main and staysail which will sail through all but the most depressing conditions.

So what's it for you, slutter or cutter rig sailboat? We usually set the cutter rig on Alacazam , as it's a great reaching rig for cruising through the Windward and Leeward Islands of the Caribbean.

Other popular rigs for cruising offshore...

Is The Ketch Sailboat the Best Type of Sailboat for Offshore Cruising?

It's true that the ketch sailboat with its split rig can make an attractive cruising sailboat for a short-handed crew, but there is a downside to these types of sailboats

What Are Cat Ketch Sailboats and Do they Make Good Cruising Boats?

Seen alongside the complexity of a conventional sailboat, it's easy to imagine that the unstayed rigs of cat ketch sailboats represent the future for cruising sailboat designs.

The Najad 390 Sailboat

Interested in the Najad 390 sailboat? Here are the pics, specs and performance predictions you're looking for...

Recent Articles

Live Aboard Boats For Sale

Mar 30, 24 07:02 PM

A Beneteau Oceanis 43 for Sale

Mar 30, 24 06:01 PM

'Hitchcock', an RM1260 Sailboat for Sale

Mar 27, 24 09:53 AM

Here's where to:

• Find  Used Sailboats for Sale...
• Find Used Sailing Gear for Sale...
• List your Sailboat for Sale...
• List your Used Sailing Gear...

Our eBooks...

Cruising Boats...

Our ever-growing gallery of pics and basic specifications of many popular cruising boats...

A few of our Most Popular Pages...

Copyright © 2024  Dick McClary  Sailboat-Cruising.com

• CREW PRESENTATION
• WORKING FROM MY EXCESS
• Excess campus
• EXCESS SAILORS
• EXCESS 14 SERIES
• PROPULSION & ENERGY
• SAIL & RIGGING
• DESIGN & ARCHITECTURE
• E PROPULSION
• About the Lab

CUTTER RIG ON THE 14

I would like to raise a question on the possibility / suggestion to add a foresail in order to have a cutter rig (adding a self tacking small jib for storm like weather).

Are the structural components ready for such a configuration?

Would you suggest such a configuration, do you see advantages, considering an around the world plan?

EXCESS CATAMARAN SIGNATURE LIGHTING

Aft transoms.

To share the article, please use the link below

https://lab.excess-catamarans.com/cutter-rig-on-the-14-197

Yachting World

• Digital Edition

Fast Bluewater Cruisers: the best new performance bluewater catamarans on the market 2018

• Toby Hodges
• August 20, 2018

Many monohull sailors who are thinking of converting to mulithulls for distance cruising seek a combination of the speed and feel of performance cruisers together with the space multihulls provide. To offer proper bluewater cruising ability yet not be too sluggish, a fast cruising cat or tri needs to be smartly designed with payload in mind and built relatively light. Here ’ s where the fast distance cruisers like Outremer, Catana, Swisscat, Seawind, Balance, Atlantic, Neel and Ocean Explorer help offer that potential sabbatical or retirement dream.

Just launched: Outremer 51

The original Outremer 51 launched in 2014 and proved popular, selling more than 50 models. It also garnered a number of European and US yacht of the year titles. But things can always improve, so the French catamaran builder has updated the design with the help of feedback from hundreds of owners. The improvements are superficial and substantial: the interior and exterior styling has been changed, but the boat’s performance has also been tweaked. Not only does this make the boat more fun, it is also “an important safety attribute”, says Outremer. With speeds in excess of 20 knots perfectly achievable, you could certainly outrun bad weather and potentially clock up 400 miles over 24 hours. This sleek-looking boat has on-trend reverse bows, curved coachroof and low-profile steering positions. The helms are slightly raised above the cockpit with a clear 360° view out over the coachroof. It may lack the real estate of a flybridge helm station, but it saves weight and allows the boom to be lower on the mast, all of which helps stability and performance. Control lines all lead back across the coachroof to winches within easy reach of the helmsman, except for the mainsheet, which runs along a track on the aft crossbeam behind the cockpit.

The saloon has comfortable seating and a table for six to eight, with a forward-looking navstation that is a good size. Accommodation is three or four cabins, depending on whether you opt for an owner’s-only hull. If you do, there’s a separate heads and shower, desk, seating and storage. Outremer makes much of the boat’s quietness, free from the grinding and cracking noises you hear as some cats flex. For liveaboards this could be a welcome feature.

First impressions

Outremer has done an impressive job of updating its most popular model, outside and in. I like the modern, muscular look of the sculpted-out topsides and dreadnought bows. Improved build techniques – partly acquired since its takeover of Gunboat – have also allowed the yard to save 600kg over the original model. The 51 has enough of a go-faster appeal for those converting from performance monohulls – the majority of Outremer’s clients, says sales manager Matthieu Rougevin-Baville – while at the same time retaining the seaworthy build and features for which the brand is known. It’s about keeping things simple, good-looking yet durable. For those with the budget, this is the ideal size of boat, in terms of speed bought by long waterline length, volume for accommodation and payload capacity (3 tonnes), for long-term, fast bluewater sailing.

At a glance…

LOA: 51ft 3in (15.65m) Beam: 24ft 4in (7.42m) Draught: 3ft 1in-7ft 7in (0.94m-2.31m) Displacement: 13.7 tonnes Price: from €735,000 Contact: Catamaran Outremer

Just launched: Ocean Explorer 60

Rubbing shoulders with Nautor’s Swan in Jakobstad, Finland, the new team behind this boat have a long track record in building low-impact yachts with high performance. And it’s not just a postcode they share with Swan – German Frers is also the designer of this yacht. The OE60 is the first in a range running to 78ft. There is carbon 
load-point reinforcing and an 
all-carbon rig for performance, with the further option of a carbon hull as well. Cutter rigged with a self-tacking jib and staysail, it has a long, sculpted bowsprit for launching downwind sails. Dual helm stations on each hull have long clear views ahead.

I wrote about this catamaran during its conception five years ago, but La Grande Motte was the first time I had seen one. Wow, talk about worth the wait… this is quite simply one of the most impressive luxury multihulls I have been aboard. Four main subcontractors to Nautor’s Swan and Baltic Yachts formed the company and the quality of their craftsmanship is, as you would expect, world class. It is the first production cat for Frers, yet the Argentinian designer has managed to maintain his reputation for alluring lines – this is a long, low and particularly elegant design. I like the helms right in the quarters, a more familiar position for monohull sailors, while the glass-based coachroof allows the helmsman a reasonable sight to the opposite bow. Step inside and it is the true panoramic view these vertical windows all combine to give that really appeals. The forward cockpit is a practical area for manning halyards or standing watch. I also like the clean, spreader-less rig and massive yet practical stowage areas. The skipper told me he had sailed a Gunboat 60 across the Pacific and that this OE60 matches its performance. A key is the C-foils, the most reliable appendage system he has used. This was the second OE60 to be built (the first has done four Atlantic and one Pacific crossing in four years) and is being used for charter. What I’d give for a week aboard this…

LOA: 60ft 7in (18.50m) Beam: 29ft 8in (9.07m) Draught: 2ft 6in-6ft 6in (0.85m-2.00m) Displacement: 18 tonnes Price: from €3.6m Contact: Frers

Just launched: Seawind 1600

The new flagship performance cruiser from the Australian brand made a welcome world debut at La Grande Motte in April. The Reichel Pugh design sits in a similar market to the Outremer 51 – a fast composite cruiser, aimed at couples going long-distance cruising. The first six 1600s sold off plans and Seawind, which owns Corsair, now builds in Vietnam. All boats are built using vinylester and Diam foam. The 1600 is Reichel Pugh’s first production multihull and has a practical air about it that sailors will appreciate. “It has been properly designed to sail fast when loaded,” says Seawind sales manager Jay Nolan. The helmsman can steer from under the solid bimini or can stand outboard, with a good view over the low coachroof. Retractable, captive daggerboards, along with foam-cored lifting rudders in cassettes, allow true shoal draught capability. The daggerboards are housed underdeck and controlled from the cockpit. The running rigging is, unusually, led under the coachroof and bridgedeck aft to a single central winch on the aft crossbeam. Reefing lines and the self-tacking jib sheet also lead to this protected, vertically mounted winch. The cockpit is smallish, linked to the interior via a huge sliding window.

I quickly took to this boat. The choice of performance monohull specialists to design a cruising cat is unusual, yet here the combination of Reichel Pugh’s reputation for winning lines and Seawind’s three decades of catamaran building experience has worked admirably. Sailors will appreciate the practical elements incorporated throughout. The design itself has particularly narrow hulls at waterline level, a low freeboard and coachroof, and the incorporation of a proper payload capacity into the light displacement. The use of captive boards and rudder cassettes allow for both sailing to windward and shoal cruising. The cassettes also create the option to replace 
or repair a blade easily and the low coachroof allows proper forward visibility 
from either helm. With the addition of larger portholes in the cabins, the 1600 gives an interesting fast cruising option for couples.

LOA: 51ft 8in (15.74m) Beam: 25ft 10in (7.90m) Draught: 8ft 6in-2ft 1in (2.6m-0.54m) Displacement: 13 tonnes Price: from €740,000 Contact: Seawind 

If you enjoyed this….

Yachting World is the foremost international magazine for bluewater cruisers and offshore sailors.  Every month we have practical features to help you plan and prepare to realise your sailing dreams. Build your knowledge month by month with a subscription delivered to your door – and at a discount to the cover price.  S ee our latest offers now.