xenta joystick yacht control price

Xenta Systems

REQUEST AN INSTALLATION QUOTE

​ Wireless Joystick

The Wireless Joystick brings the same Smart-Stick technology that is built in to your fixed Xenta Joystick to a mobile device. 

You will still have the same precise confident control but now you can move freely about the boat enabling you to see all corners of the vessel as you are docking, anchoring, and maneuvering in close quarters. 

VMA (Vessel Maneuvering Assistant)

The original idea conceived by Xentas was to replace the traditional control head and the rudder with a joystick that would have allowed to dock the craft with only one control system in a safe, simple and intuitive way.

The Vessel Maneuvering Assistant (VMA) allows the pilot to perform any maneuver by moving the joystick in the chosen direction. Analogously, by rotating the knob of the joystick (clockwise or anticlockwise) the craft rotates around its axis; this implies that the pilot can concentrate on the most suitable maneuver, letting the system take care of how to activate the engines and the thrusters. With the aid of the integrated compass the system is able to perform all the maneuvers compensating automatically the effect of the wind and of the leeway drift. Moreover, the system is able to perform in a very simple way combined maneuvers.

Just like the VMA, the PLUS version manages autonomously and cleverly all the onboard means of propulsion allowing the pilot to concentrate on the most suitable maneuver and leaving to the system the task of determining how to activate the engines and the thrusters.

Moreover, the system is able to perform combined maneuvers and to adjust the thrust of the engines modulating the RPM or to operate on the throlling-valve. VMA PLUS allows to install up to 6 control stations and the use of a wireless portable station which is able to govern the craft in full safety from any place on board. Moreover, the funtion of position keeping is also available which, if it is activated, keeps the craft in a determined position even when it is windy or in case the current should be strong.

The system can be easily installed, even retrofitted, on any kind of boat equipped with two engines and with the bow thruster.

JMC (Joystick for Maneuvering and Cruising)

The JMC allows to control the craft with only one level either when maneuvering and when cruising. JMC manages cleverly the main engines, the gearbox, the rudders (or the hydrojets or the surface piercing propellers), the bow thruster and the stern thruster if the boast is equipped with one. JMC allows the pilot to control the craft with only one hand, moving the joystick in the chosen direction to obtain the required movement.

HELM BY WIRES

The innovative HELM BY WIRES system by XENTA Systems makes the traditional rudders apparatus on the craft very simple. The system is equipped with sensors that detect the angle of rotation of the rudder wheel and convey it to the control unit through 2 independent communication channels with the CANBUS technology. The solution guarantees the maximum safety thanks to the redundancy of the signals. Moreover, the system is equipped with an electromagnetic brake that allows to modulate the torque for the rotation of the helm and to manage actively the limit switches of the helm. With the aid of this technology, the system is able to adjust the torque for the rotation of the helm when the engines RPM change; in this way the pilot gets a direct feedback on the real navigation conditions and safety is guaranteed.

The HELM BY WIRES system is interfaced with the traditinal rudder apparatuses; moreover, the system is able to manage the hydrojet and the surface piercing propellers systems.

The innovative and compact design of the THROTTLE system combines the ergonomical levers with a very intuitive position of the press buttons and of the indicators which make the system extremely simple and comfortable to use. The THROTTLE system relies, in order to allow the communication between the various components of the system, on the CAN-BUS technology that holds an excellent track record of reliability. The CAN-BUS technology allows to perfectly and automatically synchronize the engines even when slight shifts of positin between one lever and the other occur. 

The system also integrates the SYNCHRO operative mode that allows to use a single lever to govern both engines. The THROTTLE system by XENTA Systems is compatible with the most common marine engines, gearboxes, and propulsion systems.

In the traditional installations in shaft drive engines systems, the THROTTLE system coordinates the main engines and the gearboxes. The system is also able to manage all the additional functions of the hydrojet propulsion systems and of the surface piercing propellers systems.

There are no products listed under this category.

Watch videos on the latest innovations and XENTA products in action.

XENTA. Beyond the Quality of Individual Products.

More than a decade ago, XENTA launched the first Joystick Steering System and has not looked back since. In the intervening years, it has broadened its scope and now offers a complete product range for boats of all types: sailing or motor, cruising or maneuvering. Its products are integrated with engines, thruster systems: shaft lines, surface drives, waterjets, pods, etc. XENTA can offer custom systems adapted to any type of yacht design: monohull, multihull, planing, displacement, etc.

XENTA’s product range includes: Electronic Throttles, Electro-Hydraulic Steering Systems, Joysticks, Flaps and Remote Control Systems.

The XENTA systems can work very efficiently independently of each other but they deliver the greatest advantages when they are integrated. XENTA has developed a sophisticated integrated Control System that makes the interaction of the various components even more efficient. This in turn has broadened the range of functionalities offered as well as boosting performance, reliability and safety. Purchasing a XENTA Integrated Control System is a worthwhile move because installation is simpler and faster and it also facilitates assistance.

Controlling your boat has never been simpler, safer or more exhilarating. 

Freedom of Movement, Integration and Design

Xenta combines leading-edge technology, vision and creativity to bring innovation to the nautical world..

Since its earliest days, XENTA has been renowned for the precision and reliability of its products. Its Control Systems incorporate both hardware and software to guarantee superior performance, reliability, user-friendliness and maintenance.

The X-DOCK allows you to execute complex maneuvers simply and with exceptional precision.

The X-POWER is the perfect marriage of a robust yet ergonomic design and a user-friendly control system.

The X-STEER system uses CAN-BUS technology to connect the console with the engine room.

X-DP is the perfect way of holding your boat’s position without having to down anchor.

X-RC is a wireless device that offers absolute mooring confidence in all conditions.

Privacy Overview

• News & Trends
• Propulsion, Engine controls
• Motor joystick

Exhibitions

Motor joystick boat for ships for yachts.

Characteristics

Description.

Meet this supplier at the following exhibition(s):

19-21 Nov 2024 Amsterdam (Netherlands) Hall 01 - Stand 251

Other XENTA products

Our products.

• Control lever
• Engine control lever
• Boat control lever
• Multi-lever control lever
• Boat remote control
• Digital control lever
• Boat steering
• Boat joystick
• Ship joystick
• Wireless remote control
• Ship control lever
• Thruster remote control
• Mechanical steering
• Windlass remote control
• Waterproof remote control
• Yacht control lever
• Steering system
• Motor remote control
• Hydraulic steering system